McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 60

Question 590

Within Configuration Basics, a Junos engineer proposes the following response: Create a configuration group and use apply-groups at the appropriate hierarchy. Which concept or operating procedure is best illustrated?

  1. Configuration groups reuse
  2. Avoid insecure Telnet management
  3. Logical unit zero
  4. TACACS+ login authentication

Explanation

Correct Answer

A:

Junos configuration groups reuse defined statements across the hierarchy through inheritance. This meets the stated need for configuration groups reuse.

Incorrect Answers

B:

The avoid insecure telnet management scenario has a different requirement: SSH encrypts administrative sessions; traditional Telnet sends management traffic without transport encryption. It does not directly meet the configuration groups reuse need in this question.

C:

The logical unit zero scenario has a different requirement: Logical interface units hold protocol-family configuration below the parent physical interface. It does not directly meet the configuration groups reuse need in this question.

D:

The tacacs+ login authentication scenario has a different requirement: TACACS+ can integrate administrative authentication with centralized AAA policy and accounting. It does not directly meet the configuration groups reuse need in this question.

Question 591

A site has many interfaces needing the same settings, and manual duplication has caused inconsistent values. The proposed response is: Create a configuration group and use apply-groups at the appropriate hierarchy. Which explanation most accurately supports this response?

  1. SSH encrypts administrative sessions; traditional Telnet sends management traffic without transport encryption.
  2. Logical interface units hold protocol-family configuration below the parent physical interface.
  3. TACACS+ can integrate administrative authentication with centralized AAA policy and accounting.
  4. Junos configuration groups reuse defined statements across the hierarchy through inheritance.

Explanation

Correct Answer

D:

Junos configuration groups reuse defined statements across the hierarchy through inheritance. This meets the stated need for configuration groups reuse.

Incorrect Answers

A:

The avoid insecure telnet management scenario has a different requirement: SSH encrypts administrative sessions; traditional Telnet sends management traffic without transport encryption. It does not directly meet the configuration groups reuse need in this question.

B:

The logical unit zero scenario has a different requirement: Logical interface units hold protocol-family configuration below the parent physical interface. It does not directly meet the configuration groups reuse need in this question.

C:

The tacacs+ login authentication scenario has a different requirement: TACACS+ can integrate administrative authentication with centralized AAA policy and accounting. It does not directly meet the configuration groups reuse need in this question.

Question 592

Within Configuration Basics, a technician selects this approach: Create a configuration group and use apply-groups at the appropriate hierarchy. Which original requirement or fault would most directly justify it?

  1. An audit finds the management plane uses unencrypted Telnet for routine administrator sessions.
  2. An Ethernet physical interface must hold one untagged logical routed interface.
  3. A team needs centralized device administrator authentication and accounting through an approved TACACS+ service.
  4. A site has many interfaces needing the same settings, and manual duplication has caused inconsistent values.

Explanation

Correct Answer

D:

Junos configuration groups reuse defined statements across the hierarchy through inheritance. This meets the stated need for configuration groups reuse.

Incorrect Answers

A:

The avoid insecure telnet management scenario has a different requirement: SSH encrypts administrative sessions; traditional Telnet sends management traffic without transport encryption. It does not directly meet the configuration groups reuse need in this question.

B:

The logical unit zero scenario has a different requirement: Logical interface units hold protocol-family configuration below the parent physical interface. It does not directly meet the configuration groups reuse need in this question.

C:

The tacacs+ login authentication scenario has a different requirement: TACACS+ can integrate administrative authentication with centralized AAA policy and accounting. It does not directly meet the configuration groups reuse need in this question.

Question 593

One interface must not inherit a particular applied configuration group used elsewhere. Which configuration or troubleshooting action most directly meets the need?

  1. Set an appropriate MTU on the selected interface consistent with the end-to-end link requirements.
  2. Use apply-groups-except at the appropriate hierarchy level.
  3. Configure supported SNMP read access with restricted communities or stronger authenticated mechanisms.
  4. Use rollback rescue or the supported rescue-loading procedure, review, then commit.

Explanation

Correct Answer

B:

The exclusion statement prevents a specified applied group from affecting a selected subtree. This meets the stated need for exclude inherited group.

Incorrect Answers

A:

The set interface mtu scenario has a different requirement: The interface MTU bounds packet size handled by that interface and must be consistent with connected peers. It does not directly meet the exclude inherited group need in this question.

C:

The read-only snmp polling scenario has a different requirement: A read-only SNMP configuration enables telemetry polling while limiting configuration-write exposure. It does not directly meet the exclude inherited group need in this question.

D:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the exclude inherited group need in this question.

Question 594

Within Configuration Basics, a Junos engineer proposes the following response: Use apply-groups-except at the appropriate hierarchy level. Which concept or operating procedure is best illustrated?

  1. Set interface MTU
  2. Read-only SNMP polling
  3. Exclude inherited group
  4. Load rescue configuration

Explanation

Correct Answer

C:

The exclusion statement prevents a specified applied group from affecting a selected subtree. This meets the stated need for exclude inherited group.

Incorrect Answers

A:

The set interface mtu scenario has a different requirement: The interface MTU bounds packet size handled by that interface and must be consistent with connected peers. It does not directly meet the exclude inherited group need in this question.

B:

The read-only snmp polling scenario has a different requirement: A read-only SNMP configuration enables telemetry polling while limiting configuration-write exposure. It does not directly meet the exclude inherited group need in this question.

D:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the exclude inherited group need in this question.

Question 595

One interface must not inherit a particular applied configuration group used elsewhere. The proposed response is: Use apply-groups-except at the appropriate hierarchy level. Which explanation most accurately supports this response?

  1. The interface MTU bounds packet size handled by that interface and must be consistent with connected peers.
  2. A read-only SNMP configuration enables telemetry polling while limiting configuration-write exposure.
  3. The exclusion statement prevents a specified applied group from affecting a selected subtree.
  4. A saved rescue configuration provides a previously approved configuration to restore when normal changes fail.

Explanation

Correct Answer

C:

The exclusion statement prevents a specified applied group from affecting a selected subtree. This meets the stated need for exclude inherited group.

Incorrect Answers

A:

The set interface mtu scenario has a different requirement: The interface MTU bounds packet size handled by that interface and must be consistent with connected peers. It does not directly meet the exclude inherited group need in this question.

B:

The read-only snmp polling scenario has a different requirement: A read-only SNMP configuration enables telemetry polling while limiting configuration-write exposure. It does not directly meet the exclude inherited group need in this question.

D:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the exclude inherited group need in this question.

Question 596

Within Configuration Basics, a technician selects this approach: Use apply-groups-except at the appropriate hierarchy level. Which original requirement or fault would most directly justify it?

  1. Large traffic frames fail because the configured interface MTU is smaller than the needed payload.
  2. A monitoring platform needs to poll interface counters without permission to change device configuration.
  3. One interface must not inherit a particular applied configuration group used elsewhere.
  4. Normal configuration revisions are unusable and the device must recover from a saved rescue baseline.

Explanation

Correct Answer

C:

The exclusion statement prevents a specified applied group from affecting a selected subtree. This meets the stated need for exclude inherited group.

Incorrect Answers

A:

The set interface mtu scenario has a different requirement: The interface MTU bounds packet size handled by that interface and must be consistent with connected peers. It does not directly meet the exclude inherited group need in this question.

B:

The read-only snmp polling scenario has a different requirement: A read-only SNMP configuration enables telemetry polling while limiting configuration-write exposure. It does not directly meet the exclude inherited group need in this question.

D:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the exclude inherited group need in this question.

Question 597

A known-good baseline should be recoverable if an operator makes a damaging change. Which configuration or troubleshooting action most directly meets the need?

  1. Configure the IPv4 address under interfaces ge-0/0/0 unit 0 family inet address.
  2. Configure appropriate VLAN tagging and per-unit VLAN IDs for the selected interface style.
  3. Run request system configuration rescue save after verifying the stable configuration.
  4. Use rollback rescue or the supported rescue-loading procedure, review, then commit.

Explanation

Correct Answer

C:

A rescue configuration records a recovery baseline separate from ordinary numbered rollbacks. This meets the stated need for save rescue configuration.

Incorrect Answers

A:

The ipv4 logical interface address scenario has a different requirement: Junos associates routed IPv4 addressing with a logical interface and the family inet hierarchy. It does not directly meet the save rescue configuration need in this question.

B:

The enable tagged ethernet transport scenario has a different requirement: VLAN-tagged interfaces distinguish multiple logical Ethernet encapsulations over a shared physical link. It does not directly meet the save rescue configuration need in this question.

D:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the save rescue configuration need in this question.

Question 598

Within Configuration Basics, a Junos engineer proposes the following response: Run request system configuration rescue save after verifying the stable configuration. Which concept or operating procedure is best illustrated?

  1. Save rescue configuration
  2. IPv4 logical interface address
  3. Enable tagged Ethernet transport
  4. Load rescue configuration

Explanation

Correct Answer

A:

A rescue configuration records a recovery baseline separate from ordinary numbered rollbacks. This meets the stated need for save rescue configuration.

Incorrect Answers

B:

The ipv4 logical interface address scenario has a different requirement: Junos associates routed IPv4 addressing with a logical interface and the family inet hierarchy. It does not directly meet the save rescue configuration need in this question.

C:

The enable tagged ethernet transport scenario has a different requirement: VLAN-tagged interfaces distinguish multiple logical Ethernet encapsulations over a shared physical link. It does not directly meet the save rescue configuration need in this question.

D:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the save rescue configuration need in this question.

Question 599

A known-good baseline should be recoverable if an operator makes a damaging change. The proposed response is: Run request system configuration rescue save after verifying the stable configuration. Which explanation most accurately supports this response?

  1. A rescue configuration records a recovery baseline separate from ordinary numbered rollbacks.
  2. Junos associates routed IPv4 addressing with a logical interface and the family inet hierarchy.
  3. VLAN-tagged interfaces distinguish multiple logical Ethernet encapsulations over a shared physical link.
  4. A saved rescue configuration provides a previously approved configuration to restore when normal changes fail.

Explanation

Correct Answer

A:

A rescue configuration records a recovery baseline separate from ordinary numbered rollbacks. This meets the stated need for save rescue configuration.

Incorrect Answers

B:

The ipv4 logical interface address scenario has a different requirement: Junos associates routed IPv4 addressing with a logical interface and the family inet hierarchy. It does not directly meet the save rescue configuration need in this question.

C:

The enable tagged ethernet transport scenario has a different requirement: VLAN-tagged interfaces distinguish multiple logical Ethernet encapsulations over a shared physical link. It does not directly meet the save rescue configuration need in this question.

D:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the save rescue configuration need in this question.

Question 600

Within Configuration Basics, a technician selects this approach: Run request system configuration rescue save after verifying the stable configuration. Which original requirement or fault would most directly justify it?

  1. A known-good baseline should be recoverable if an operator makes a damaging change.
  2. An uplink must be assigned 198.51.100.2/30 so it can communicate with its peer.
  3. A physical uplink must carry tagged traffic from several logical VLAN units.
  4. Normal configuration revisions are unusable and the device must recover from a saved rescue baseline.

Explanation

Correct Answer

A:

A rescue configuration records a recovery baseline separate from ordinary numbered rollbacks. This meets the stated need for save rescue configuration.

Incorrect Answers

B:

The ipv4 logical interface address scenario has a different requirement: Junos associates routed IPv4 addressing with a logical interface and the family inet hierarchy. It does not directly meet the save rescue configuration need in this question.

C:

The enable tagged ethernet transport scenario has a different requirement: VLAN-tagged interfaces distinguish multiple logical Ethernet encapsulations over a shared physical link. It does not directly meet the save rescue configuration need in this question.

D:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the save rescue configuration need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests