McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 51

Question 500

Within Configuration Basics, a technician selects this approach: Configure the IPv4 address under interfaces ge-0/0/0 unit 0 family inet address. Which original requirement or fault would most directly justify it?

  1. An uplink must be assigned 198.51.100.2/30 so it can communicate with its peer.
  2. An operations team needs important device log events centralized on a remote collector.
  3. A junior analyst should inspect device status without configuration-change privileges.
  4. Large traffic frames fail because the configured interface MTU is smaller than the needed payload.

Explanation

Correct Answer

A:

Junos associates routed IPv4 addressing with a logical interface and the family inet hierarchy. This meets the stated need for ipv4 logical interface address.

Incorrect Answers

B:

The forward syslog remotely scenario has a different requirement: Remote syslog forwards selected system events to a collector for centralized analysis. It does not directly meet the ipv4 logical interface address need in this question.

C:

The read-only login class scenario has a different requirement: Junos login classes define permissions and help enforce least privilege for operators. It does not directly meet the ipv4 logical interface address need in this question.

D:

The set interface mtu scenario has a different requirement: The interface MTU bounds packet size handled by that interface and must be consistent with connected peers. It does not directly meet the ipv4 logical interface address need in this question.

Question 501

An interface must participate in a routed IPv6 /64 network. Which configuration or troubleshooting action most directly meets the need?

  1. Configure an appropriate system syslog host destination and logging facility severities.
  2. Configure TACACS+ servers and a suitable authentication order for administrative access.
  3. Set an appropriate value under system time-zone and commit.
  4. Configure the IPv6 prefix under the logical interface's family inet6 address hierarchy.

Explanation

Correct Answer

D:

Junos family inet6 enables IPv6 address configuration independently of IPv4 family inet. This meets the stated need for ipv6 logical interface address.

Incorrect Answers

A:

The forward syslog remotely scenario has a different requirement: Remote syslog forwards selected system events to a collector for centralized analysis. It does not directly meet the ipv6 logical interface address need in this question.

B:

The tacacs+ login authentication scenario has a different requirement: TACACS+ can integrate administrative authentication with centralized AAA policy and accounting. It does not directly meet the ipv6 logical interface address need in this question.

C:

The set system time zone scenario has a different requirement: The configured time zone controls local-time presentation independently of the absolute time maintained by the device. It does not directly meet the ipv6 logical interface address need in this question.

Question 502

Within Configuration Basics, a Junos engineer proposes the following response: Configure the IPv6 prefix under the logical interface's family inet6 address hierarchy. Which concept or operating procedure is best illustrated?

  1. Forward syslog remotely
  2. IPv6 logical interface address
  3. TACACS+ login authentication
  4. Set system time zone

Explanation

Correct Answer

B:

Junos family inet6 enables IPv6 address configuration independently of IPv4 family inet. This meets the stated need for ipv6 logical interface address.

Incorrect Answers

A:

The forward syslog remotely scenario has a different requirement: Remote syslog forwards selected system events to a collector for centralized analysis. It does not directly meet the ipv6 logical interface address need in this question.

C:

The tacacs+ login authentication scenario has a different requirement: TACACS+ can integrate administrative authentication with centralized AAA policy and accounting. It does not directly meet the ipv6 logical interface address need in this question.

D:

The set system time zone scenario has a different requirement: The configured time zone controls local-time presentation independently of the absolute time maintained by the device. It does not directly meet the ipv6 logical interface address need in this question.

Question 503

An interface must participate in a routed IPv6 /64 network. The proposed response is: Configure the IPv6 prefix under the logical interface's family inet6 address hierarchy. Which explanation most accurately supports this response?

  1. Remote syslog forwards selected system events to a collector for centralized analysis.
  2. TACACS+ can integrate administrative authentication with centralized AAA policy and accounting.
  3. Junos family inet6 enables IPv6 address configuration independently of IPv4 family inet.
  4. The configured time zone controls local-time presentation independently of the absolute time maintained by the device.

Explanation

Correct Answer

C:

Junos family inet6 enables IPv6 address configuration independently of IPv4 family inet. This meets the stated need for ipv6 logical interface address.

Incorrect Answers

A:

The forward syslog remotely scenario has a different requirement: Remote syslog forwards selected system events to a collector for centralized analysis. It does not directly meet the ipv6 logical interface address need in this question.

B:

The tacacs+ login authentication scenario has a different requirement: TACACS+ can integrate administrative authentication with centralized AAA policy and accounting. It does not directly meet the ipv6 logical interface address need in this question.

D:

The set system time zone scenario has a different requirement: The configured time zone controls local-time presentation independently of the absolute time maintained by the device. It does not directly meet the ipv6 logical interface address need in this question.

Question 504

Within Configuration Basics, a technician selects this approach: Configure the IPv6 prefix under the logical interface's family inet6 address hierarchy. Which original requirement or fault would most directly justify it?

  1. An operations team needs important device log events centralized on a remote collector.
  2. A team needs centralized device administrator authentication and accounting through an approved TACACS+ service.
  3. An interface must participate in a routed IPv6 /64 network.
  4. A maintenance team wants local log timestamps interpreted in the selected administrative time zone.

Explanation

Correct Answer

C:

Junos family inet6 enables IPv6 address configuration independently of IPv4 family inet. This meets the stated need for ipv6 logical interface address.

Incorrect Answers

A:

The forward syslog remotely scenario has a different requirement: Remote syslog forwards selected system events to a collector for centralized analysis. It does not directly meet the ipv6 logical interface address need in this question.

B:

The tacacs+ login authentication scenario has a different requirement: TACACS+ can integrate administrative authentication with centralized AAA policy and accounting. It does not directly meet the ipv6 logical interface address need in this question.

D:

The set system time zone scenario has a different requirement: The configured time zone controls local-time presentation independently of the absolute time maintained by the device. It does not directly meet the ipv6 logical interface address need in this question.

Question 505

An Ethernet physical interface must hold one untagged logical routed interface. Which configuration or troubleshooting action most directly meets the need?

  1. Configure the interface's supported Ethernet-switching membership in the finance VLAN.
  2. Prefer SSH and remove unnecessary Telnet service exposure from the device.
  3. Create unit 0 and place its family configuration beneath that logical unit.
  4. Assign an appropriately restricted login class such as read-only to the account.

Explanation

Correct Answer

C:

Logical interface units hold protocol-family configuration below the parent physical interface. This meets the stated need for logical unit zero.

Incorrect Answers

A:

The assign access vlan scenario has a different requirement: An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment. It does not directly meet the logical unit zero need in this question.

B:

The avoid insecure telnet management scenario has a different requirement: SSH encrypts administrative sessions; traditional Telnet sends management traffic without transport encryption. It does not directly meet the logical unit zero need in this question.

D:

The read-only login class scenario has a different requirement: Junos login classes define permissions and help enforce least privilege for operators. It does not directly meet the logical unit zero need in this question.

Question 506

Within Configuration Basics, a Junos engineer proposes the following response: Create unit 0 and place its family configuration beneath that logical unit. Which concept or operating procedure is best illustrated?

  1. Assign access VLAN
  2. Avoid insecure Telnet management
  3. Logical unit zero
  4. Read-only login class

Explanation

Correct Answer

C:

Logical interface units hold protocol-family configuration below the parent physical interface. This meets the stated need for logical unit zero.

Incorrect Answers

A:

The assign access vlan scenario has a different requirement: An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment. It does not directly meet the logical unit zero need in this question.

B:

The avoid insecure telnet management scenario has a different requirement: SSH encrypts administrative sessions; traditional Telnet sends management traffic without transport encryption. It does not directly meet the logical unit zero need in this question.

D:

The read-only login class scenario has a different requirement: Junos login classes define permissions and help enforce least privilege for operators. It does not directly meet the logical unit zero need in this question.

Question 507

An Ethernet physical interface must hold one untagged logical routed interface. The proposed response is: Create unit 0 and place its family configuration beneath that logical unit. Which explanation most accurately supports this response?

  1. An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment.
  2. Logical interface units hold protocol-family configuration below the parent physical interface.
  3. SSH encrypts administrative sessions; traditional Telnet sends management traffic without transport encryption.
  4. Junos login classes define permissions and help enforce least privilege for operators.

Explanation

Correct Answer

B:

Logical interface units hold protocol-family configuration below the parent physical interface. This meets the stated need for logical unit zero.

Incorrect Answers

A:

The assign access vlan scenario has a different requirement: An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment. It does not directly meet the logical unit zero need in this question.

C:

The avoid insecure telnet management scenario has a different requirement: SSH encrypts administrative sessions; traditional Telnet sends management traffic without transport encryption. It does not directly meet the logical unit zero need in this question.

D:

The read-only login class scenario has a different requirement: Junos login classes define permissions and help enforce least privilege for operators. It does not directly meet the logical unit zero need in this question.

Question 508

Within Configuration Basics, a technician selects this approach: Create unit 0 and place its family configuration beneath that logical unit. Which original requirement or fault would most directly justify it?

  1. A switch interface serving a finance workstation should carry untagged VLAN 120 traffic.
  2. An audit finds the management plane uses unencrypted Telnet for routine administrator sessions.
  3. An Ethernet physical interface must hold one untagged logical routed interface.
  4. A junior analyst should inspect device status without configuration-change privileges.

Explanation

Correct Answer

C:

Logical interface units hold protocol-family configuration below the parent physical interface. This meets the stated need for logical unit zero.

Incorrect Answers

A:

The assign access vlan scenario has a different requirement: An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment. It does not directly meet the logical unit zero need in this question.

B:

The avoid insecure telnet management scenario has a different requirement: SSH encrypts administrative sessions; traditional Telnet sends management traffic without transport encryption. It does not directly meet the logical unit zero need in this question.

D:

The read-only login class scenario has a different requirement: Junos login classes define permissions and help enforce least privilege for operators. It does not directly meet the logical unit zero need in this question.

Question 509

An uplink should be documented as 'WAN-to-Core' in operational displays. Which configuration or troubleshooting action most directly meets the need?

  1. Configure description WAN-to-Core on the appropriate physical or logical interface.
  2. Run request system configuration rescue save after verifying the stable configuration.
  3. Configure the supported system authentication-order and RADIUS server settings.
  4. Configure appropriate VLAN tagging and per-unit VLAN IDs for the selected interface style.

Explanation

Correct Answer

A:

Descriptions annotate interfaces for administrators without themselves changing IP routing behavior. This meets the stated need for set interface description.

Incorrect Answers

B:

The save rescue configuration scenario has a different requirement: A rescue configuration records a recovery baseline separate from ordinary numbered rollbacks. It does not directly meet the set interface description need in this question.

C:

The radius administrator authentication scenario has a different requirement: Junos can use centrally managed RADIUS credentials when authentication order and server parameters are configured. It does not directly meet the set interface description need in this question.

D:

The enable tagged ethernet transport scenario has a different requirement: VLAN-tagged interfaces distinguish multiple logical Ethernet encapsulations over a shared physical link. It does not directly meet the set interface description need in this question.

Question 510

Within Configuration Basics, a Junos engineer proposes the following response: Configure description WAN-to-Core on the appropriate physical or logical interface. Which concept or operating procedure is best illustrated?

  1. Save rescue configuration
  2. Set interface description
  3. RADIUS administrator authentication
  4. Enable tagged Ethernet transport

Explanation

Correct Answer

B:

Descriptions annotate interfaces for administrators without themselves changing IP routing behavior. This meets the stated need for set interface description.

Incorrect Answers

A:

The save rescue configuration scenario has a different requirement: A rescue configuration records a recovery baseline separate from ordinary numbered rollbacks. It does not directly meet the set interface description need in this question.

C:

The radius administrator authentication scenario has a different requirement: Junos can use centrally managed RADIUS credentials when authentication order and server parameters are configured. It does not directly meet the set interface description need in this question.

D:

The enable tagged ethernet transport scenario has a different requirement: VLAN-tagged interfaces distinguish multiple logical Ethernet encapsulations over a shared physical link. It does not directly meet the set interface description need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests