McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 48

Question 470

Within Configuration Basics, a Junos engineer proposes the following response: Configure system root-authentication plain-text-password through the supported password prompt. Which concept or operating procedure is best illustrated?

  1. Logical unit zero
  2. Load rescue configuration
  3. Set root authentication
  4. Configure loopback IP

Explanation

Correct Answer

C:

Junos initial configuration requires root authentication so privileged management access is not left without a credential. This meets the stated need for set root authentication.

Incorrect Answers

A:

The logical unit zero scenario has a different requirement: Logical interface units hold protocol-family configuration below the parent physical interface. It does not directly meet the set root authentication need in this question.

B:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the set root authentication need in this question.

D:

The configure loopback ip scenario has a different requirement: The loopback logical interface provides a software address that can remain available despite individual physical-link changes. It does not directly meet the set root authentication need in this question.

Question 471

A new Junos device must have an administrative root credential before initial configuration is committed. The proposed response is: Configure system root-authentication plain-text-password through the supported password prompt. Which explanation most accurately supports this response?

  1. Logical interface units hold protocol-family configuration below the parent physical interface.
  2. A saved rescue configuration provides a previously approved configuration to restore when normal changes fail.
  3. Junos initial configuration requires root authentication so privileged management access is not left without a credential.
  4. The loopback logical interface provides a software address that can remain available despite individual physical-link changes.

Explanation

Correct Answer

C:

Junos initial configuration requires root authentication so privileged management access is not left without a credential. This meets the stated need for set root authentication.

Incorrect Answers

A:

The logical unit zero scenario has a different requirement: Logical interface units hold protocol-family configuration below the parent physical interface. It does not directly meet the set root authentication need in this question.

B:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the set root authentication need in this question.

D:

The configure loopback ip scenario has a different requirement: The loopback logical interface provides a software address that can remain available despite individual physical-link changes. It does not directly meet the set root authentication need in this question.

Question 472

Within Configuration Basics, a technician selects this approach: Configure system root-authentication plain-text-password through the supported password prompt. Which original requirement or fault would most directly justify it?

  1. An Ethernet physical interface must hold one untagged logical routed interface.
  2. Normal configuration revisions are unusable and the device must recover from a saved rescue baseline.
  3. A routing protocol needs a stable IPv4 address independent of a particular physical port.
  4. A new Junos device must have an administrative root credential before initial configuration is committed.

Explanation

Correct Answer

D:

Junos initial configuration requires root authentication so privileged management access is not left without a credential. This meets the stated need for set root authentication.

Incorrect Answers

A:

The logical unit zero scenario has a different requirement: Logical interface units hold protocol-family configuration below the parent physical interface. It does not directly meet the set root authentication need in this question.

B:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the set root authentication need in this question.

C:

The configure loopback ip scenario has a different requirement: The loopback logical interface provides a software address that can remain available despite individual physical-link changes. It does not directly meet the set root authentication need in this question.

Question 473

A device should identify itself as edge-r1 in prompts and system logs. Which configuration or troubleshooting action most directly meets the need?

  1. Configure the interface's supported Ethernet-switching membership in the finance VLAN.
  2. Create a user under system login user with an authorized login class and authentication.
  3. Set system host-name edge-r1 and commit the configuration.
  4. Set an appropriate value under system time-zone and commit.

Explanation

Correct Answer

C:

The system host-name statement defines the router's configured hostname used in identification. This meets the stated need for set system host name.

Incorrect Answers

A:

The assign access vlan scenario has a different requirement: An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment. It does not directly meet the set system host name need in this question.

B:

The create administrative user scenario has a different requirement: Local user configuration binds an account name to a login class and accepted credentials. It does not directly meet the set system host name need in this question.

D:

The set system time zone scenario has a different requirement: The configured time zone controls local-time presentation independently of the absolute time maintained by the device. It does not directly meet the set system host name need in this question.

Question 474

Within Configuration Basics, a Junos engineer proposes the following response: Set system host-name edge-r1 and commit the configuration. Which concept or operating procedure is best illustrated?

  1. Assign access VLAN
  2. Create administrative user
  3. Set system time zone
  4. Set system host name

Explanation

Correct Answer

D:

The system host-name statement defines the router's configured hostname used in identification. This meets the stated need for set system host name.

Incorrect Answers

A:

The assign access vlan scenario has a different requirement: An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment. It does not directly meet the set system host name need in this question.

B:

The create administrative user scenario has a different requirement: Local user configuration binds an account name to a login class and accepted credentials. It does not directly meet the set system host name need in this question.

C:

The set system time zone scenario has a different requirement: The configured time zone controls local-time presentation independently of the absolute time maintained by the device. It does not directly meet the set system host name need in this question.

Question 475

A device should identify itself as edge-r1 in prompts and system logs. The proposed response is: Set system host-name edge-r1 and commit the configuration. Which explanation most accurately supports this response?

  1. An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment.
  2. Local user configuration binds an account name to a login class and accepted credentials.
  3. The system host-name statement defines the router's configured hostname used in identification.
  4. The configured time zone controls local-time presentation independently of the absolute time maintained by the device.

Explanation

Correct Answer

C:

The system host-name statement defines the router's configured hostname used in identification. This meets the stated need for set system host name.

Incorrect Answers

A:

The assign access vlan scenario has a different requirement: An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment. It does not directly meet the set system host name need in this question.

B:

The create administrative user scenario has a different requirement: Local user configuration binds an account name to a login class and accepted credentials. It does not directly meet the set system host name need in this question.

D:

The set system time zone scenario has a different requirement: The configured time zone controls local-time presentation independently of the absolute time maintained by the device. It does not directly meet the set system host name need in this question.

Question 476

Within Configuration Basics, a technician selects this approach: Set system host-name edge-r1 and commit the configuration. Which original requirement or fault would most directly justify it?

  1. A device should identify itself as edge-r1 in prompts and system logs.
  2. A switch interface serving a finance workstation should carry untagged VLAN 120 traffic.
  3. An operations engineer needs a named local account with appropriate system privileges.
  4. A maintenance team wants local log timestamps interpreted in the selected administrative time zone.

Explanation

Correct Answer

A:

The system host-name statement defines the router's configured hostname used in identification. This meets the stated need for set system host name.

Incorrect Answers

B:

The assign access vlan scenario has a different requirement: An access VLAN assignment associates untagged endpoint frames with the selected Layer 2 segment. It does not directly meet the set system host name need in this question.

C:

The create administrative user scenario has a different requirement: Local user configuration binds an account name to a login class and accepted credentials. It does not directly meet the set system host name need in this question.

D:

The set system time zone scenario has a different requirement: The configured time zone controls local-time presentation independently of the absolute time maintained by the device. It does not directly meet the set system host name need in this question.

Question 477

A maintenance team wants local log timestamps interpreted in the selected administrative time zone. Which configuration or troubleshooting action most directly meets the need?

  1. Configure a reachable approved NTP server under system ntp.
  2. Set an appropriate value under system time-zone and commit.
  3. Use rollback rescue or the supported rescue-loading procedure, review, then commit.
  4. Set an appropriate MTU on the selected interface consistent with the end-to-end link requirements.

Explanation

Correct Answer

B:

The configured time zone controls local-time presentation independently of the absolute time maintained by the device. This meets the stated need for set system time zone.

Incorrect Answers

A:

The configure ntp server scenario has a different requirement: NTP synchronizes device time to configured reference servers and improves event correlation. It does not directly meet the set system time zone need in this question.

C:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the set system time zone need in this question.

D:

The set interface mtu scenario has a different requirement: The interface MTU bounds packet size handled by that interface and must be consistent with connected peers. It does not directly meet the set system time zone need in this question.

Question 478

Within Configuration Basics, a Junos engineer proposes the following response: Set an appropriate value under system time-zone and commit. Which concept or operating procedure is best illustrated?

  1. Configure NTP server
  2. Load rescue configuration
  3. Set system time zone
  4. Set interface MTU

Explanation

Correct Answer

C:

The configured time zone controls local-time presentation independently of the absolute time maintained by the device. This meets the stated need for set system time zone.

Incorrect Answers

A:

The configure ntp server scenario has a different requirement: NTP synchronizes device time to configured reference servers and improves event correlation. It does not directly meet the set system time zone need in this question.

B:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the set system time zone need in this question.

D:

The set interface mtu scenario has a different requirement: The interface MTU bounds packet size handled by that interface and must be consistent with connected peers. It does not directly meet the set system time zone need in this question.

Question 479

A maintenance team wants local log timestamps interpreted in the selected administrative time zone. The proposed response is: Set an appropriate value under system time-zone and commit. Which explanation most accurately supports this response?

  1. The configured time zone controls local-time presentation independently of the absolute time maintained by the device.
  2. NTP synchronizes device time to configured reference servers and improves event correlation.
  3. A saved rescue configuration provides a previously approved configuration to restore when normal changes fail.
  4. The interface MTU bounds packet size handled by that interface and must be consistent with connected peers.

Explanation

Correct Answer

A:

The configured time zone controls local-time presentation independently of the absolute time maintained by the device. This meets the stated need for set system time zone.

Incorrect Answers

B:

The configure ntp server scenario has a different requirement: NTP synchronizes device time to configured reference servers and improves event correlation. It does not directly meet the set system time zone need in this question.

C:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the set system time zone need in this question.

D:

The set interface mtu scenario has a different requirement: The interface MTU bounds packet size handled by that interface and must be consistent with connected peers. It does not directly meet the set system time zone need in this question.

Question 480

Within Configuration Basics, a technician selects this approach: Set an appropriate value under system time-zone and commit. Which original requirement or fault would most directly justify it?

  1. Junos logs have timestamps that drift away from the organization's trusted clock.
  2. Normal configuration revisions are unusable and the device must recover from a saved rescue baseline.
  3. A maintenance team wants local log timestamps interpreted in the selected administrative time zone.
  4. Large traffic frames fail because the configured interface MTU is smaller than the needed payload.

Explanation

Correct Answer

C:

The configured time zone controls local-time presentation independently of the absolute time maintained by the device. This meets the stated need for set system time zone.

Incorrect Answers

A:

The configure ntp server scenario has a different requirement: NTP synchronizes device time to configured reference servers and improves event correlation. It does not directly meet the set system time zone need in this question.

B:

The load rescue configuration scenario has a different requirement: A saved rescue configuration provides a previously approved configuration to restore when normal changes fail. It does not directly meet the set system time zone need in this question.

D:

The set interface mtu scenario has a different requirement: The interface MTU bounds packet size handled by that interface and must be consistent with connected peers. It does not directly meet the set system time zone need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests