McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 39

Question 380

Within User Interfaces, a technician selects this approach: Use commit confirmed 5 to require confirmation within five minutes. Which original requirement or fault would most directly justify it?

  1. A technician finishes editing system services and wants to leave the current edit level.
  2. A remote change might break management access and should revert if the operator cannot confirm success.
  3. A network administrator is in operational mode and must change a system host-name.
  4. An operator needs a quick count of lines returned by a filtered operational command.

Explanation

Correct Answer

B:

Commit confirmed activates temporarily and automatically rolls back unless confirmed within the chosen interval. This meets the stated need for automatic confirmed rollback.

Incorrect Answers

A:

The exit a nested edit context scenario has a different requirement: Exit or quit changes the CLI edit context and should not be confused with committing pending changes. It does not directly meet the automatic confirmed rollback need in this question.

C:

The enter configuration mode scenario has a different requirement: The configure command enters Junos configuration mode so settings can be changed before commit. It does not directly meet the automatic confirmed rollback need in this question.

D:

The count command output lines scenario has a different requirement: The count pipe filter reports the number of lines or matching records emitted by the preceding command. It does not directly meet the automatic confirmed rollback need in this question.

Question 381

An engineer wants to abandon all pending edits and restore the current committed configuration into the candidate. Which configuration or troubleshooting action most directly meets the need?

  1. Use commit confirmed 5 to require confirmation within five minutes.
  2. Use deactivate on the targeted configuration statement and commit.
  3. Use rollback 0 from configuration mode.
  4. Use configure private and reconcile any global changes before committing.

Explanation

Correct Answer

C:

Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences. This meets the stated need for discard uncommitted edits.

Incorrect Answers

A:

The automatic confirmed rollback scenario has a different requirement: Commit confirmed activates temporarily and automatically rolls back unless confirmed within the chosen interval. It does not directly meet the discard uncommitted edits need in this question.

B:

The deactivate a statement temporarily scenario has a different requirement: Deactivation preserves a statement in configuration while marking it inactive for the running configuration. It does not directly meet the discard uncommitted edits need in this question.

D:

The private configuration sessions scenario has a different requirement: Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions. It does not directly meet the discard uncommitted edits need in this question.

Question 382

Within User Interfaces, a Junos engineer proposes the following response: Use rollback 0 from configuration mode. Which concept or operating procedure is best illustrated?

  1. Automatic confirmed rollback
  2. Discard uncommitted edits
  3. Deactivate a statement temporarily
  4. Private configuration sessions

Explanation

Correct Answer

B:

Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences. This meets the stated need for discard uncommitted edits.

Incorrect Answers

A:

The automatic confirmed rollback scenario has a different requirement: Commit confirmed activates temporarily and automatically rolls back unless confirmed within the chosen interval. It does not directly meet the discard uncommitted edits need in this question.

C:

The deactivate a statement temporarily scenario has a different requirement: Deactivation preserves a statement in configuration while marking it inactive for the running configuration. It does not directly meet the discard uncommitted edits need in this question.

D:

The private configuration sessions scenario has a different requirement: Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions. It does not directly meet the discard uncommitted edits need in this question.

Question 383

An engineer wants to abandon all pending edits and restore the current committed configuration into the candidate. The proposed response is: Use rollback 0 from configuration mode. Which explanation most accurately supports this response?

  1. Commit confirmed activates temporarily and automatically rolls back unless confirmed within the chosen interval.
  2. Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences.
  3. Deactivation preserves a statement in configuration while marking it inactive for the running configuration.
  4. Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions.

Explanation

Correct Answer

B:

Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences. This meets the stated need for discard uncommitted edits.

Incorrect Answers

A:

The automatic confirmed rollback scenario has a different requirement: Commit confirmed activates temporarily and automatically rolls back unless confirmed within the chosen interval. It does not directly meet the discard uncommitted edits need in this question.

C:

The deactivate a statement temporarily scenario has a different requirement: Deactivation preserves a statement in configuration while marking it inactive for the running configuration. It does not directly meet the discard uncommitted edits need in this question.

D:

The private configuration sessions scenario has a different requirement: Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions. It does not directly meet the discard uncommitted edits need in this question.

Question 384

Within User Interfaces, a technician selects this approach: Use rollback 0 from configuration mode. Which original requirement or fault would most directly justify it?

  1. An engineer wants to abandon all pending edits and restore the current committed configuration into the candidate.
  2. A remote change might break management access and should revert if the operator cannot confirm success.
  3. An administrator wants to retain an interface configuration while preventing that statement from taking effect.
  4. Two engineers are making independent edits and one wants a personal candidate without immediately sharing uncommitted changes.

Explanation

Correct Answer

A:

Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences. This meets the stated need for discard uncommitted edits.

Incorrect Answers

B:

The automatic confirmed rollback scenario has a different requirement: Commit confirmed activates temporarily and automatically rolls back unless confirmed within the chosen interval. It does not directly meet the discard uncommitted edits need in this question.

C:

The deactivate a statement temporarily scenario has a different requirement: Deactivation preserves a statement in configuration while marking it inactive for the running configuration. It does not directly meet the discard uncommitted edits need in this question.

D:

The private configuration sessions scenario has a different requirement: Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions. It does not directly meet the discard uncommitted edits need in this question.

Question 385

A recent production change caused a fault and the administrator wants the immediately previous committed configuration. Which configuration or troubleshooting action most directly meets the need?

  1. Append | match errors to the command where supported.
  2. Use rollback 0 from configuration mode.
  3. Run commit check in configuration mode.
  4. Use rollback 1 in configuration mode followed by commit after review.

Explanation

Correct Answer

D:

Rollback 1 loads the preceding committed revision into the candidate; commit activates the chosen rollback. This meets the stated need for load preceding commit.

Incorrect Answers

A:

The filter command output by match scenario has a different requirement: The match pipe filter selects output lines containing the requested expression. It does not directly meet the load preceding commit need in this question.

B:

The discard uncommitted edits scenario has a different requirement: Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences. It does not directly meet the load preceding commit need in this question.

C:

The syntax-only commit check scenario has a different requirement: Commit check validates the candidate configuration without making the changes active. It does not directly meet the load preceding commit need in this question.

Question 386

Within User Interfaces, a Junos engineer proposes the following response: Use rollback 1 in configuration mode followed by commit after review. Which concept or operating procedure is best illustrated?

  1. Filter command output by match
  2. Load preceding commit
  3. Discard uncommitted edits
  4. Syntax-only commit check

Explanation

Correct Answer

B:

Rollback 1 loads the preceding committed revision into the candidate; commit activates the chosen rollback. This meets the stated need for load preceding commit.

Incorrect Answers

A:

The filter command output by match scenario has a different requirement: The match pipe filter selects output lines containing the requested expression. It does not directly meet the load preceding commit need in this question.

C:

The discard uncommitted edits scenario has a different requirement: Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences. It does not directly meet the load preceding commit need in this question.

D:

The syntax-only commit check scenario has a different requirement: Commit check validates the candidate configuration without making the changes active. It does not directly meet the load preceding commit need in this question.

Question 387

A recent production change caused a fault and the administrator wants the immediately previous committed configuration. The proposed response is: Use rollback 1 in configuration mode followed by commit after review. Which explanation most accurately supports this response?

  1. Rollback 1 loads the preceding committed revision into the candidate; commit activates the chosen rollback.
  2. The match pipe filter selects output lines containing the requested expression.
  3. Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences.
  4. Commit check validates the candidate configuration without making the changes active.

Explanation

Correct Answer

A:

Rollback 1 loads the preceding committed revision into the candidate; commit activates the chosen rollback. This meets the stated need for load preceding commit.

Incorrect Answers

B:

The filter command output by match scenario has a different requirement: The match pipe filter selects output lines containing the requested expression. It does not directly meet the load preceding commit need in this question.

C:

The discard uncommitted edits scenario has a different requirement: Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences. It does not directly meet the load preceding commit need in this question.

D:

The syntax-only commit check scenario has a different requirement: Commit check validates the candidate configuration without making the changes active. It does not directly meet the load preceding commit need in this question.

Question 388

Within User Interfaces, a technician selects this approach: Use rollback 1 in configuration mode followed by commit after review. Which original requirement or fault would most directly justify it?

  1. A large show interfaces command produces many lines, but a reviewer needs only entries containing errors.
  2. An engineer wants to abandon all pending edits and restore the current committed configuration into the candidate.
  3. A recent production change caused a fault and the administrator wants the immediately previous committed configuration.
  4. A technician needs to detect candidate configuration syntax errors without activating the edits.

Explanation

Correct Answer

C:

Rollback 1 loads the preceding committed revision into the candidate; commit activates the chosen rollback. This meets the stated need for load preceding commit.

Incorrect Answers

A:

The filter command output by match scenario has a different requirement: The match pipe filter selects output lines containing the requested expression. It does not directly meet the load preceding commit need in this question.

B:

The discard uncommitted edits scenario has a different requirement: Rollback 0 loads the latest committed configuration into the candidate, discarding uncommitted differences. It does not directly meet the load preceding commit need in this question.

D:

The syntax-only commit check scenario has a different requirement: Commit check validates the candidate configuration without making the changes active. It does not directly meet the load preceding commit need in this question.

Question 389

A team wants to know when configuration commits occurred and who initiated them. Which configuration or troubleshooting action most directly meets the need?

  1. Enter configure exclusive to obtain exclusive configuration access.
  2. Run show system commit from operational mode.
  3. Use load merge with the intended configuration file in configuration mode.
  4. Enter configure before editing the candidate configuration.

Explanation

Correct Answer

B:

The commit-history command lists recent committed configuration events and their metadata. This meets the stated need for inspect commit history.

Incorrect Answers

A:

The exclusive configuration lock scenario has a different requirement: Exclusive configuration mode locks the candidate configuration against other editing sessions until the lock is released. It does not directly meet the inspect commit history need in this question.

C:

The merge configuration snippet scenario has a different requirement: Load merge combines supplied hierarchy statements with the candidate configuration instead of replacing everything. It does not directly meet the inspect commit history need in this question.

D:

The enter configuration mode scenario has a different requirement: The configure command enters Junos configuration mode so settings can be changed before commit. It does not directly meet the inspect commit history need in this question.

Question 390

Within User Interfaces, a Junos engineer proposes the following response: Run show system commit from operational mode. Which concept or operating procedure is best illustrated?

  1. Inspect commit history
  2. Exclusive configuration lock
  3. Merge configuration snippet
  4. Enter configuration mode

Explanation

Correct Answer

A:

The commit-history command lists recent committed configuration events and their metadata. This meets the stated need for inspect commit history.

Incorrect Answers

B:

The exclusive configuration lock scenario has a different requirement: Exclusive configuration mode locks the candidate configuration against other editing sessions until the lock is released. It does not directly meet the inspect commit history need in this question.

C:

The merge configuration snippet scenario has a different requirement: Load merge combines supplied hierarchy statements with the candidate configuration instead of replacing everything. It does not directly meet the inspect commit history need in this question.

D:

The enter configuration mode scenario has a different requirement: The configure command enters Junos configuration mode so settings can be changed before commit. It does not directly meet the inspect commit history need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests