McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 36

Question 350

Within User Interfaces, a Junos engineer proposes the following response: Use activate on the existing inactive statement and commit. Which concept or operating procedure is best illustrated?

  1. Reactivate a statement
  2. Delete a candidate statement
  3. Load preceding commit
  4. Exclusive configuration lock

Explanation

Correct Answer

A:

The activate command restores participation of a deactivated configuration statement. This meets the stated need for reactivate a statement.

Incorrect Answers

B:

The delete a candidate statement scenario has a different requirement: The delete command removes a targeted statement from the candidate configuration hierarchy. It does not directly meet the reactivate a statement need in this question.

C:

The load preceding commit scenario has a different requirement: Rollback 1 loads the preceding committed revision into the candidate; commit activates the chosen rollback. It does not directly meet the reactivate a statement need in this question.

D:

The exclusive configuration lock scenario has a different requirement: Exclusive configuration mode locks the candidate configuration against other editing sessions until the lock is released. It does not directly meet the reactivate a statement need in this question.

Question 351

A previously deactivated OSPF interface should again participate without retyping its stored configuration. The proposed response is: Use activate on the existing inactive statement and commit. Which explanation most accurately supports this response?

  1. The delete command removes a targeted statement from the candidate configuration hierarchy.
  2. The activate command restores participation of a deactivated configuration statement.
  3. Rollback 1 loads the preceding committed revision into the candidate; commit activates the chosen rollback.
  4. Exclusive configuration mode locks the candidate configuration against other editing sessions until the lock is released.

Explanation

Correct Answer

B:

The activate command restores participation of a deactivated configuration statement. This meets the stated need for reactivate a statement.

Incorrect Answers

A:

The delete a candidate statement scenario has a different requirement: The delete command removes a targeted statement from the candidate configuration hierarchy. It does not directly meet the reactivate a statement need in this question.

C:

The load preceding commit scenario has a different requirement: Rollback 1 loads the preceding committed revision into the candidate; commit activates the chosen rollback. It does not directly meet the reactivate a statement need in this question.

D:

The exclusive configuration lock scenario has a different requirement: Exclusive configuration mode locks the candidate configuration against other editing sessions until the lock is released. It does not directly meet the reactivate a statement need in this question.

Question 352

Within User Interfaces, a technician selects this approach: Use activate on the existing inactive statement and commit. Which original requirement or fault would most directly justify it?

  1. An incorrect interface description remains in the candidate configuration and should be removed.
  2. A previously deactivated OSPF interface should again participate without retyping its stored configuration.
  3. A recent production change caused a fault and the administrator wants the immediately previous committed configuration.
  4. A sensitive maintenance action requires blocking competing configuration writers while one engineer edits.

Explanation

Correct Answer

B:

The activate command restores participation of a deactivated configuration statement. This meets the stated need for reactivate a statement.

Incorrect Answers

A:

The delete a candidate statement scenario has a different requirement: The delete command removes a targeted statement from the candidate configuration hierarchy. It does not directly meet the reactivate a statement need in this question.

C:

The load preceding commit scenario has a different requirement: Rollback 1 loads the preceding committed revision into the candidate; commit activates the chosen rollback. It does not directly meet the reactivate a statement need in this question.

D:

The exclusive configuration lock scenario has a different requirement: Exclusive configuration mode locks the candidate configuration against other editing sessions until the lock is released. It does not directly meet the reactivate a statement need in this question.

Question 353

A VLAN label must change while its existing child configuration should follow the renamed identifier. Which configuration or troubleshooting action most directly meets the need?

  1. Use a set command at the applicable hierarchy to create the candidate statement.
  2. Use rename for the configuration identifier in the relevant hierarchy.
  3. Use load override with the verified complete configuration file.
  4. Type ? at the CLI command position to list valid completions or help.

Explanation

Correct Answer

B:

The rename command changes an identifier while retaining its associated subordinate settings where supported. This meets the stated need for rename a hierarchy identifier.

Incorrect Answers

A:

The set a candidate statement scenario has a different requirement: The set command adds or changes configuration statements in the candidate database. It does not directly meet the rename a hierarchy identifier need in this question.

C:

The replace entire candidate config scenario has a different requirement: Load override replaces the candidate configuration, so it must be used only when full replacement is intended. It does not directly meet the rename a hierarchy identifier need in this question.

D:

The context-sensitive cli help scenario has a different requirement: The Junos question-mark help facility displays context-sensitive commands and parameters. It does not directly meet the rename a hierarchy identifier need in this question.

Question 354

Within User Interfaces, a Junos engineer proposes the following response: Use rename for the configuration identifier in the relevant hierarchy. Which concept or operating procedure is best illustrated?

  1. Set a candidate statement
  2. Replace entire candidate config
  3. Rename a hierarchy identifier
  4. Context-sensitive CLI help

Explanation

Correct Answer

C:

The rename command changes an identifier while retaining its associated subordinate settings where supported. This meets the stated need for rename a hierarchy identifier.

Incorrect Answers

A:

The set a candidate statement scenario has a different requirement: The set command adds or changes configuration statements in the candidate database. It does not directly meet the rename a hierarchy identifier need in this question.

B:

The replace entire candidate config scenario has a different requirement: Load override replaces the candidate configuration, so it must be used only when full replacement is intended. It does not directly meet the rename a hierarchy identifier need in this question.

D:

The context-sensitive cli help scenario has a different requirement: The Junos question-mark help facility displays context-sensitive commands and parameters. It does not directly meet the rename a hierarchy identifier need in this question.

Question 355

A VLAN label must change while its existing child configuration should follow the renamed identifier. The proposed response is: Use rename for the configuration identifier in the relevant hierarchy. Which explanation most accurately supports this response?

  1. The set command adds or changes configuration statements in the candidate database.
  2. The rename command changes an identifier while retaining its associated subordinate settings where supported.
  3. Load override replaces the candidate configuration, so it must be used only when full replacement is intended.
  4. The Junos question-mark help facility displays context-sensitive commands and parameters.

Explanation

Correct Answer

B:

The rename command changes an identifier while retaining its associated subordinate settings where supported. This meets the stated need for rename a hierarchy identifier.

Incorrect Answers

A:

The set a candidate statement scenario has a different requirement: The set command adds or changes configuration statements in the candidate database. It does not directly meet the rename a hierarchy identifier need in this question.

C:

The replace entire candidate config scenario has a different requirement: Load override replaces the candidate configuration, so it must be used only when full replacement is intended. It does not directly meet the rename a hierarchy identifier need in this question.

D:

The context-sensitive cli help scenario has a different requirement: The Junos question-mark help facility displays context-sensitive commands and parameters. It does not directly meet the rename a hierarchy identifier need in this question.

Question 356

Within User Interfaces, a technician selects this approach: Use rename for the configuration identifier in the relevant hierarchy. Which original requirement or fault would most directly justify it?

  1. An engineer wants to add a description to an interface without manually editing a text file.
  2. An authorized baseline file is intended to replace the whole existing candidate configuration.
  3. An administrator cannot remember permitted keywords after show interfaces.
  4. A VLAN label must change while its existing child configuration should follow the renamed identifier.

Explanation

Correct Answer

D:

The rename command changes an identifier while retaining its associated subordinate settings where supported. This meets the stated need for rename a hierarchy identifier.

Incorrect Answers

A:

The set a candidate statement scenario has a different requirement: The set command adds or changes configuration statements in the candidate database. It does not directly meet the rename a hierarchy identifier need in this question.

B:

The replace entire candidate config scenario has a different requirement: Load override replaces the candidate configuration, so it must be used only when full replacement is intended. It does not directly meet the rename a hierarchy identifier need in this question.

C:

The context-sensitive cli help scenario has a different requirement: The Junos question-mark help facility displays context-sensitive commands and parameters. It does not directly meet the rename a hierarchy identifier need in this question.

Question 357

An administrator edited routing settings but has not yet committed them and wants to see the pending state. Which configuration or troubleshooting action most directly meets the need?

  1. Recognize configuration mode, where candidate configuration can be modified.
  2. Use show in configuration mode to inspect the candidate configuration.
  3. Append | match errors to the command where supported.
  4. Append | count to the selected command output.

Explanation

Correct Answer

B:

Configuration-mode show displays the candidate hierarchy, including pending modifications. This meets the stated need for candidate configuration display.

Incorrect Answers

A:

The configuration-mode prompt scenario has a different requirement: A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode. It does not directly meet the candidate configuration display need in this question.

C:

The filter command output by match scenario has a different requirement: The match pipe filter selects output lines containing the requested expression. It does not directly meet the candidate configuration display need in this question.

D:

The count command output lines scenario has a different requirement: The count pipe filter reports the number of lines or matching records emitted by the preceding command. It does not directly meet the candidate configuration display need in this question.

Question 358

Within User Interfaces, a Junos engineer proposes the following response: Use show in configuration mode to inspect the candidate configuration. Which concept or operating procedure is best illustrated?

  1. Configuration-mode prompt
  2. Filter command output by match
  3. Candidate configuration display
  4. Count command output lines

Explanation

Correct Answer

C:

Configuration-mode show displays the candidate hierarchy, including pending modifications. This meets the stated need for candidate configuration display.

Incorrect Answers

A:

The configuration-mode prompt scenario has a different requirement: A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode. It does not directly meet the candidate configuration display need in this question.

B:

The filter command output by match scenario has a different requirement: The match pipe filter selects output lines containing the requested expression. It does not directly meet the candidate configuration display need in this question.

D:

The count command output lines scenario has a different requirement: The count pipe filter reports the number of lines or matching records emitted by the preceding command. It does not directly meet the candidate configuration display need in this question.

Question 359

An administrator edited routing settings but has not yet committed them and wants to see the pending state. The proposed response is: Use show in configuration mode to inspect the candidate configuration. Which explanation most accurately supports this response?

  1. A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode.
  2. Configuration-mode show displays the candidate hierarchy, including pending modifications.
  3. The match pipe filter selects output lines containing the requested expression.
  4. The count pipe filter reports the number of lines or matching records emitted by the preceding command.

Explanation

Correct Answer

B:

Configuration-mode show displays the candidate hierarchy, including pending modifications. This meets the stated need for candidate configuration display.

Incorrect Answers

A:

The configuration-mode prompt scenario has a different requirement: A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode. It does not directly meet the candidate configuration display need in this question.

C:

The filter command output by match scenario has a different requirement: The match pipe filter selects output lines containing the requested expression. It does not directly meet the candidate configuration display need in this question.

D:

The count command output lines scenario has a different requirement: The count pipe filter reports the number of lines or matching records emitted by the preceding command. It does not directly meet the candidate configuration display need in this question.

Question 360

Within User Interfaces, a technician selects this approach: Use show in configuration mode to inspect the candidate configuration. Which original requirement or fault would most directly justify it?

  1. An administrator edited routing settings but has not yet committed them and wants to see the pending state.
  2. A technician sees the Junos CLI prompt ending in # below an edit banner.
  3. A large show interfaces command produces many lines, but a reviewer needs only entries containing errors.
  4. An operator needs a quick count of lines returned by a filtered operational command.

Explanation

Correct Answer

A:

Configuration-mode show displays the candidate hierarchy, including pending modifications. This meets the stated need for candidate configuration display.

Incorrect Answers

B:

The configuration-mode prompt scenario has a different requirement: A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode. It does not directly meet the candidate configuration display need in this question.

C:

The filter command output by match scenario has a different requirement: The match pipe filter selects output lines containing the requested expression. It does not directly meet the candidate configuration display need in this question.

D:

The count command output lines scenario has a different requirement: The count pipe filter reports the number of lines or matching records emitted by the preceding command. It does not directly meet the candidate configuration display need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests