McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 32

Question 310

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Check Routing Engine mastership and protocol reconvergence along with traffic forwarding. Which concept or operating procedure is best illustrated?

  1. Packet Forwarding Engine data plane
  2. Packet queue scheduling
  3. Exception packet processing
  4. Control-plane failover verification

Explanation

Correct Answer

D:

Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover. This meets the stated need for control-plane failover verification.

Incorrect Answers

A:

The packet forwarding engine data plane scenario has a different requirement: The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. It does not directly meet the control-plane failover verification need in this question.

B:

The packet queue scheduling scenario has a different requirement: Queue scheduling is a packet-forwarding function that determines transmission order during interface contention. It does not directly meet the control-plane failover verification need in this question.

C:

The exception packet processing scenario has a different requirement: Packets destined to the router or requiring software handling differ from ordinary hardware-forwarded transit traffic. It does not directly meet the control-plane failover verification need in this question.

Question 311

A dual-RE chassis switchover occurs during a maintenance window and administrators must validate stability. The proposed response is: Check Routing Engine mastership and protocol reconvergence along with traffic forwarding. Which explanation most accurately supports this response?

  1. Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover.
  2. The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations.
  3. Queue scheduling is a packet-forwarding function that determines transmission order during interface contention.
  4. Packets destined to the router or requiring software handling differ from ordinary hardware-forwarded transit traffic.

Explanation

Correct Answer

A:

Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover. This meets the stated need for control-plane failover verification.

Incorrect Answers

B:

The packet forwarding engine data plane scenario has a different requirement: The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. It does not directly meet the control-plane failover verification need in this question.

C:

The packet queue scheduling scenario has a different requirement: Queue scheduling is a packet-forwarding function that determines transmission order during interface contention. It does not directly meet the control-plane failover verification need in this question.

D:

The exception packet processing scenario has a different requirement: Packets destined to the router or requiring software handling differ from ordinary hardware-forwarded transit traffic. It does not directly meet the control-plane failover verification need in this question.

Question 312

Within Junos OS Fundamentals, a technician selects this approach: Check Routing Engine mastership and protocol reconvergence along with traffic forwarding. Which original requirement or fault would most directly justify it?

  1. A received transit packet must be forwarded at hardware speed without a full control-plane lookup on every packet.
  2. A dual-RE chassis switchover occurs during a maintenance window and administrators must validate stability.
  3. Two outbound traffic classes require different queue service under egress congestion.
  4. An incoming control packet is specifically addressed to a router's own interface and requires host processing.

Explanation

Correct Answer

B:

Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover. This meets the stated need for control-plane failover verification.

Incorrect Answers

A:

The packet forwarding engine data plane scenario has a different requirement: The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. It does not directly meet the control-plane failover verification need in this question.

C:

The packet queue scheduling scenario has a different requirement: Queue scheduling is a packet-forwarding function that determines transmission order during interface contention. It does not directly meet the control-plane failover verification need in this question.

D:

The exception packet processing scenario has a different requirement: Packets destined to the router or requiring software handling differ from ordinary hardware-forwarded transit traffic. It does not directly meet the control-plane failover verification need in this question.

Question 313

An operator sees the Junos CLI prompt ending in > and wants to run monitoring commands. Which configuration or troubleshooting action most directly meets the need?

  1. Append | except followed by the exclusion pattern.
  2. Use load override with the verified complete configuration file.
  3. Use operational mode for commands such as show interfaces and show route.
  4. Use configure private and reconcile any global changes before committing.

Explanation

Correct Answer

C:

A > prompt ordinarily indicates operational mode, where device status and diagnostics can be inspected. This meets the stated need for operational-mode prompt.

Incorrect Answers

A:

The exclude output text scenario has a different requirement: The except pipe filter removes output lines matching the specified expression. It does not directly meet the operational-mode prompt need in this question.

B:

The replace entire candidate config scenario has a different requirement: Load override replaces the candidate configuration, so it must be used only when full replacement is intended. It does not directly meet the operational-mode prompt need in this question.

D:

The private configuration sessions scenario has a different requirement: Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions. It does not directly meet the operational-mode prompt need in this question.

Question 314

Within User Interfaces, a Junos engineer proposes the following response: Use operational mode for commands such as show interfaces and show route. Which concept or operating procedure is best illustrated?

  1. Operational-mode prompt
  2. Exclude output text
  3. Replace entire candidate config
  4. Private configuration sessions

Explanation

Correct Answer

A:

A > prompt ordinarily indicates operational mode, where device status and diagnostics can be inspected. This meets the stated need for operational-mode prompt.

Incorrect Answers

B:

The exclude output text scenario has a different requirement: The except pipe filter removes output lines matching the specified expression. It does not directly meet the operational-mode prompt need in this question.

C:

The replace entire candidate config scenario has a different requirement: Load override replaces the candidate configuration, so it must be used only when full replacement is intended. It does not directly meet the operational-mode prompt need in this question.

D:

The private configuration sessions scenario has a different requirement: Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions. It does not directly meet the operational-mode prompt need in this question.

Question 315

An operator sees the Junos CLI prompt ending in > and wants to run monitoring commands. The proposed response is: Use operational mode for commands such as show interfaces and show route. Which explanation most accurately supports this response?

  1. The except pipe filter removes output lines matching the specified expression.
  2. Load override replaces the candidate configuration, so it must be used only when full replacement is intended.
  3. A > prompt ordinarily indicates operational mode, where device status and diagnostics can be inspected.
  4. Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions.

Explanation

Correct Answer

C:

A > prompt ordinarily indicates operational mode, where device status and diagnostics can be inspected. This meets the stated need for operational-mode prompt.

Incorrect Answers

A:

The exclude output text scenario has a different requirement: The except pipe filter removes output lines matching the specified expression. It does not directly meet the operational-mode prompt need in this question.

B:

The replace entire candidate config scenario has a different requirement: Load override replaces the candidate configuration, so it must be used only when full replacement is intended. It does not directly meet the operational-mode prompt need in this question.

D:

The private configuration sessions scenario has a different requirement: Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions. It does not directly meet the operational-mode prompt need in this question.

Question 316

Within User Interfaces, a technician selects this approach: Use operational mode for commands such as show interfaces and show route. Which original requirement or fault would most directly justify it?

  1. A technician wants to hide lines containing an irrelevant interface description in a large status report.
  2. An authorized baseline file is intended to replace the whole existing candidate configuration.
  3. An operator sees the Junos CLI prompt ending in > and wants to run monitoring commands.
  4. Two engineers are making independent edits and one wants a personal candidate without immediately sharing uncommitted changes.

Explanation

Correct Answer

C:

A > prompt ordinarily indicates operational mode, where device status and diagnostics can be inspected. This meets the stated need for operational-mode prompt.

Incorrect Answers

A:

The exclude output text scenario has a different requirement: The except pipe filter removes output lines matching the specified expression. It does not directly meet the operational-mode prompt need in this question.

B:

The replace entire candidate config scenario has a different requirement: Load override replaces the candidate configuration, so it must be used only when full replacement is intended. It does not directly meet the operational-mode prompt need in this question.

D:

The private configuration sessions scenario has a different requirement: Private configuration mode gives an editor an isolated candidate copy, reducing interference between simultaneous sessions. It does not directly meet the operational-mode prompt need in this question.

Question 317

A technician sees the Junos CLI prompt ending in # below an edit banner. Which configuration or troubleshooting action most directly meets the need?

  1. Use the Tab key for supported CLI completion.
  2. Use J-Web where the device and release support the web interface.
  3. Append | count to the selected command output.
  4. Recognize configuration mode, where candidate configuration can be modified.

Explanation

Correct Answer

D:

A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode. This meets the stated need for configuration-mode prompt.

Incorrect Answers

A:

The cli keyword completion scenario has a different requirement: Tab completion expands valid command or statement keywords when the current prefix is unambiguous. It does not directly meet the configuration-mode prompt need in this question.

B:

The j-web gui alternative scenario has a different requirement: J-Web provides a graphical interface for common Junos management and monitoring tasks. It does not directly meet the configuration-mode prompt need in this question.

C:

The count command output lines scenario has a different requirement: The count pipe filter reports the number of lines or matching records emitted by the preceding command. It does not directly meet the configuration-mode prompt need in this question.

Question 318

Within User Interfaces, a Junos engineer proposes the following response: Recognize configuration mode, where candidate configuration can be modified. Which concept or operating procedure is best illustrated?

  1. CLI keyword completion
  2. Configuration-mode prompt
  3. J-Web GUI alternative
  4. Count command output lines

Explanation

Correct Answer

B:

A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode. This meets the stated need for configuration-mode prompt.

Incorrect Answers

A:

The cli keyword completion scenario has a different requirement: Tab completion expands valid command or statement keywords when the current prefix is unambiguous. It does not directly meet the configuration-mode prompt need in this question.

C:

The j-web gui alternative scenario has a different requirement: J-Web provides a graphical interface for common Junos management and monitoring tasks. It does not directly meet the configuration-mode prompt need in this question.

D:

The count command output lines scenario has a different requirement: The count pipe filter reports the number of lines or matching records emitted by the preceding command. It does not directly meet the configuration-mode prompt need in this question.

Question 319

A technician sees the Junos CLI prompt ending in # below an edit banner. The proposed response is: Recognize configuration mode, where candidate configuration can be modified. Which explanation most accurately supports this response?

  1. Tab completion expands valid command or statement keywords when the current prefix is unambiguous.
  2. J-Web provides a graphical interface for common Junos management and monitoring tasks.
  3. A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode.
  4. The count pipe filter reports the number of lines or matching records emitted by the preceding command.

Explanation

Correct Answer

C:

A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode. This meets the stated need for configuration-mode prompt.

Incorrect Answers

A:

The cli keyword completion scenario has a different requirement: Tab completion expands valid command or statement keywords when the current prefix is unambiguous. It does not directly meet the configuration-mode prompt need in this question.

B:

The j-web gui alternative scenario has a different requirement: J-Web provides a graphical interface for common Junos management and monitoring tasks. It does not directly meet the configuration-mode prompt need in this question.

D:

The count command output lines scenario has a different requirement: The count pipe filter reports the number of lines or matching records emitted by the preceding command. It does not directly meet the configuration-mode prompt need in this question.

Question 320

Within User Interfaces, a technician selects this approach: Recognize configuration mode, where candidate configuration can be modified. Which original requirement or fault would most directly justify it?

  1. An engineer wants to complete an unambiguous partial command without typing the remaining letters.
  2. A new operator must inspect basic Junos configuration through a browser rather than CLI commands.
  3. An operator needs a quick count of lines returned by a filtered operational command.
  4. A technician sees the Junos CLI prompt ending in # below an edit banner.

Explanation

Correct Answer

D:

A # prompt with an edit context identifies the configuration hierarchy rather than ordinary operational mode. This meets the stated need for configuration-mode prompt.

Incorrect Answers

A:

The cli keyword completion scenario has a different requirement: Tab completion expands valid command or statement keywords when the current prefix is unambiguous. It does not directly meet the configuration-mode prompt need in this question.

B:

The j-web gui alternative scenario has a different requirement: J-Web provides a graphical interface for common Junos management and monitoring tasks. It does not directly meet the configuration-mode prompt need in this question.

C:

The count command output lines scenario has a different requirement: The count pipe filter reports the number of lines or matching records emitted by the preceding command. It does not directly meet the configuration-mode prompt need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests