McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 27

Question 260

Within Junos OS Fundamentals, a technician selects this approach: Recognize the difference between uncommitted candidate configuration and the active configuration. Which original requirement or fault would most directly justify it?

  1. An administrator edits a prefix in configuration mode but the active device behavior has not changed.
  2. A supported switch forwards tenant frames through a VXLAN tunnel at line rate.
  3. An administrator opens an SSH connection to the router's management address.
  4. A routing protocol daemon restarts and an engineer must assess which plane is most directly affected.

Explanation

Correct Answer

A:

Junos maintains a candidate configuration until commit validates and activates the changes. This meets the stated need for control-plane configuration database.

Incorrect Answers

B:

The hardware-based vxlan encapsulation scenario has a different requirement: Forwarding hardware can construct or remove tunnel headers according to programmed encapsulation state. It does not directly meet the control-plane configuration database need in this question.

C:

The device-destined ssh scenario has a different requirement: SSH to the device is a local management-plane service, not ordinary packet transit forwarding. It does not directly meet the control-plane configuration database need in this question.

D:

The routing process recovery scenario has a different requirement: Routing-daemon disruption primarily affects protocol state and route learning, though forwarded traffic can be affected later. It does not directly meet the control-plane configuration database need in this question.

Question 261

The route points at a next hop on a directly attached Ethernet network and needs a deliverable link-layer address. Which configuration or troubleshooting action most directly meets the need?

  1. Handle the expired-TTL condition as an exception that may generate an ICMP time-exceeded message.
  2. Recognize the session as management-plane access rather than a routed data flow.
  3. Use the forwarding plane's replication state for multicast delivery.
  4. Resolve the next-hop adjacency so the PFE can transmit frames on the outgoing link.

Explanation

Correct Answer

D:

Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. This meets the stated need for forwarding interface resolution.

Incorrect Answers

A:

The control-plane path after pfe exception scenario has a different requirement: TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding. It does not directly meet the forwarding interface resolution need in this question.

B:

The j-web management access scenario has a different requirement: J-Web presents a device management user interface backed by Junos control-plane services. It does not directly meet the forwarding interface resolution need in this question.

C:

The hardware multicast replication scenario has a different requirement: Multicast forwarding requires data-plane replication onto eligible egress paths under control-plane membership state. It does not directly meet the forwarding interface resolution need in this question.

Question 262

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Resolve the next-hop adjacency so the PFE can transmit frames on the outgoing link. Which concept or operating procedure is best illustrated?

  1. Control-plane path after PFE exception
  2. Forwarding interface resolution
  3. J-Web management access
  4. Hardware multicast replication

Explanation

Correct Answer

B:

Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. This meets the stated need for forwarding interface resolution.

Incorrect Answers

A:

The control-plane path after pfe exception scenario has a different requirement: TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding. It does not directly meet the forwarding interface resolution need in this question.

C:

The j-web management access scenario has a different requirement: J-Web presents a device management user interface backed by Junos control-plane services. It does not directly meet the forwarding interface resolution need in this question.

D:

The hardware multicast replication scenario has a different requirement: Multicast forwarding requires data-plane replication onto eligible egress paths under control-plane membership state. It does not directly meet the forwarding interface resolution need in this question.

Question 263

The route points at a next hop on a directly attached Ethernet network and needs a deliverable link-layer address. The proposed response is: Resolve the next-hop adjacency so the PFE can transmit frames on the outgoing link. Which explanation most accurately supports this response?

  1. Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery.
  2. TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding.
  3. J-Web presents a device management user interface backed by Junos control-plane services.
  4. Multicast forwarding requires data-plane replication onto eligible egress paths under control-plane membership state.

Explanation

Correct Answer

A:

Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. This meets the stated need for forwarding interface resolution.

Incorrect Answers

B:

The control-plane path after pfe exception scenario has a different requirement: TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding. It does not directly meet the forwarding interface resolution need in this question.

C:

The j-web management access scenario has a different requirement: J-Web presents a device management user interface backed by Junos control-plane services. It does not directly meet the forwarding interface resolution need in this question.

D:

The hardware multicast replication scenario has a different requirement: Multicast forwarding requires data-plane replication onto eligible egress paths under control-plane membership state. It does not directly meet the forwarding interface resolution need in this question.

Question 264

Within Junos OS Fundamentals, a technician selects this approach: Resolve the next-hop adjacency so the PFE can transmit frames on the outgoing link. Which original requirement or fault would most directly justify it?

  1. The route points at a next hop on a directly attached Ethernet network and needs a deliverable link-layer address.
  2. An arriving packet has a time-to-live that expires at the router.
  3. A browser session logs into a Junos device's supported web administration interface.
  4. An ingress multicast packet must be copied to several eligible outgoing interfaces.

Explanation

Correct Answer

A:

Routing determines the IP next hop, while neighbor resolution supplies the link-layer destination needed for delivery. This meets the stated need for forwarding interface resolution.

Incorrect Answers

B:

The control-plane path after pfe exception scenario has a different requirement: TTL expiration requires exception processing and possible router-originated control traffic rather than successful normal transit forwarding. It does not directly meet the forwarding interface resolution need in this question.

C:

The j-web management access scenario has a different requirement: J-Web presents a device management user interface backed by Junos control-plane services. It does not directly meet the forwarding interface resolution need in this question.

D:

The hardware multicast replication scenario has a different requirement: Multicast forwarding requires data-plane replication onto eligible egress paths under control-plane membership state. It does not directly meet the forwarding interface resolution need in this question.

Question 265

A router advertises a changed BGP route to a neighbor over an established session. Which configuration or troubleshooting action most directly meets the need?

  1. Treat BGP update generation as a Routing Engine routing-daemon function.
  2. Verify that selected route changes are synchronized from the control plane into PFE forwarding entries.
  3. Read interface traffic counters collected along the forwarding path.
  4. Use the forwarding table or FIB populated from selected routing entries.

Explanation

Correct Answer

A:

BGP protocol message processing is part of control-plane route exchange, not ordinary ASIC data switching. This meets the stated need for re-generated routing updates.

Incorrect Answers

B:

The re-to-pfe route programming scenario has a different requirement: Route computations must be reflected in forwarding entries before transit traffic follows a newly selected path. It does not directly meet the re-generated routing updates need in this question.

C:

The line-card traffic accounting scenario has a different requirement: Physical interface statistics describe data-plane traffic observed by ports and forwarding hardware. It does not directly meet the re-generated routing updates need in this question.

D:

The forwarding information base scenario has a different requirement: A forwarding table contains information optimized for packet forwarding rather than every route candidate. It does not directly meet the re-generated routing updates need in this question.

Question 266

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Treat BGP update generation as a Routing Engine routing-daemon function. Which concept or operating procedure is best illustrated?

  1. RE-to-PFE route programming
  2. Line-card traffic accounting
  3. Forwarding Information Base
  4. RE-generated routing updates

Explanation

Correct Answer

D:

BGP protocol message processing is part of control-plane route exchange, not ordinary ASIC data switching. This meets the stated need for re-generated routing updates.

Incorrect Answers

A:

The re-to-pfe route programming scenario has a different requirement: Route computations must be reflected in forwarding entries before transit traffic follows a newly selected path. It does not directly meet the re-generated routing updates need in this question.

B:

The line-card traffic accounting scenario has a different requirement: Physical interface statistics describe data-plane traffic observed by ports and forwarding hardware. It does not directly meet the re-generated routing updates need in this question.

C:

The forwarding information base scenario has a different requirement: A forwarding table contains information optimized for packet forwarding rather than every route candidate. It does not directly meet the re-generated routing updates need in this question.

Question 267

A router advertises a changed BGP route to a neighbor over an established session. The proposed response is: Treat BGP update generation as a Routing Engine routing-daemon function. Which explanation most accurately supports this response?

  1. Route computations must be reflected in forwarding entries before transit traffic follows a newly selected path.
  2. Physical interface statistics describe data-plane traffic observed by ports and forwarding hardware.
  3. A forwarding table contains information optimized for packet forwarding rather than every route candidate.
  4. BGP protocol message processing is part of control-plane route exchange, not ordinary ASIC data switching.

Explanation

Correct Answer

D:

BGP protocol message processing is part of control-plane route exchange, not ordinary ASIC data switching. This meets the stated need for re-generated routing updates.

Incorrect Answers

A:

The re-to-pfe route programming scenario has a different requirement: Route computations must be reflected in forwarding entries before transit traffic follows a newly selected path. It does not directly meet the re-generated routing updates need in this question.

B:

The line-card traffic accounting scenario has a different requirement: Physical interface statistics describe data-plane traffic observed by ports and forwarding hardware. It does not directly meet the re-generated routing updates need in this question.

C:

The forwarding information base scenario has a different requirement: A forwarding table contains information optimized for packet forwarding rather than every route candidate. It does not directly meet the re-generated routing updates need in this question.

Question 268

Within Junos OS Fundamentals, a technician selects this approach: Treat BGP update generation as a Routing Engine routing-daemon function. Which original requirement or fault would most directly justify it?

  1. An OSPF change leads to a new active next hop that has not yet reached the forwarding hardware.
  2. A router advertises a changed BGP route to a neighbor over an established session.
  3. An operations team wants counts of actual ingress and egress packets on physical ports.
  4. A packet needs an egress decision from the set of selected routes rather than all protocol candidates.

Explanation

Correct Answer

B:

BGP protocol message processing is part of control-plane route exchange, not ordinary ASIC data switching. This meets the stated need for re-generated routing updates.

Incorrect Answers

A:

The re-to-pfe route programming scenario has a different requirement: Route computations must be reflected in forwarding entries before transit traffic follows a newly selected path. It does not directly meet the re-generated routing updates need in this question.

C:

The line-card traffic accounting scenario has a different requirement: Physical interface statistics describe data-plane traffic observed by ports and forwarding hardware. It does not directly meet the re-generated routing updates need in this question.

D:

The forwarding information base scenario has a different requirement: A forwarding table contains information optimized for packet forwarding rather than every route candidate. It does not directly meet the re-generated routing updates need in this question.

Question 269

An operations team wants counts of actual ingress and egress packets on physical ports. Which configuration or troubleshooting action most directly meets the need?

  1. Propagate the interface-state change from device hardware into control-plane routing decisions.
  2. Read interface traffic counters collected along the forwarding path.
  3. Identify the PFE's forwarding hardware or ASIC lookup stage.
  4. Treat BGP update generation as a Routing Engine routing-daemon function.

Explanation

Correct Answer

B:

Physical interface statistics describe data-plane traffic observed by ports and forwarding hardware. This meets the stated need for line-card traffic accounting.

Incorrect Answers

A:

The interface-link notification scenario has a different requirement: A link-state transition informs routing processes so active paths can be recalculated and forwarding adjusted. It does not directly meet the line-card traffic accounting need in this question.

C:

The forwarding asic lookup scenario has a different requirement: The packet-forwarding system uses preinstalled lookup state to select egress interfaces and next hops. It does not directly meet the line-card traffic accounting need in this question.

D:

The re-generated routing updates scenario has a different requirement: BGP protocol message processing is part of control-plane route exchange, not ordinary ASIC data switching. It does not directly meet the line-card traffic accounting need in this question.

Question 270

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Read interface traffic counters collected along the forwarding path. Which concept or operating procedure is best illustrated?

  1. Interface-link notification
  2. Forwarding ASIC lookup
  3. Line-card traffic accounting
  4. RE-generated routing updates

Explanation

Correct Answer

C:

Physical interface statistics describe data-plane traffic observed by ports and forwarding hardware. This meets the stated need for line-card traffic accounting.

Incorrect Answers

A:

The interface-link notification scenario has a different requirement: A link-state transition informs routing processes so active paths can be recalculated and forwarding adjusted. It does not directly meet the line-card traffic accounting need in this question.

B:

The forwarding asic lookup scenario has a different requirement: The packet-forwarding system uses preinstalled lookup state to select egress interfaces and next hops. It does not directly meet the line-card traffic accounting need in this question.

D:

The re-generated routing updates scenario has a different requirement: BGP protocol message processing is part of control-plane route exchange, not ordinary ASIC data switching. It does not directly meet the line-card traffic accounting need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests