McAfee-Secured Website

Exam Code: JN0-106

Exam Name: Junos, Associate (JNCIA-Junos)

Certification Provider: Juniper

Corresponding Certification: JNCIA-Junos

100% Juniper JN0-106 Guaranteed Success With Testking Training Materials

Get Real JN0-106 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

98 Questions & Answers with Testing Engine

"Junos, Associate (JNCIA-Junos) Exam", also known as JN0-106 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-106 Exam Engine. Your JN0-106 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-106 Practice Test 21

Question 200

Within Junos OS Fundamentals, a technician selects this approach: Identify the PFE's forwarding hardware or ASIC lookup stage. Which original requirement or fault would most directly justify it?

  1. A received transit packet must be forwarded at hardware speed without a full control-plane lookup on every packet.
  2. An optical link goes down and the routing protocol must stop relying on the associated adjacency.
  3. A dual-RE chassis switchover occurs during a maintenance window and administrators must validate stability.
  4. An engineer asks which hardware carries out route lookup and next-hop forwarding for high-rate transit packets.

Explanation

Correct Answer

D:

The packet-forwarding system uses preinstalled lookup state to select egress interfaces and next hops. This meets the stated need for forwarding asic lookup.

Incorrect Answers

A:

The packet forwarding engine data plane scenario has a different requirement: The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. It does not directly meet the forwarding asic lookup need in this question.

B:

The interface-link notification scenario has a different requirement: A link-state transition informs routing processes so active paths can be recalculated and forwarding adjusted. It does not directly meet the forwarding asic lookup need in this question.

C:

The control-plane failover verification scenario has a different requirement: Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover. It does not directly meet the forwarding asic lookup need in this question.

Question 201

An OSPF Hello packet reaches a participating router interface and must update neighbor state. Which configuration or troubleshooting action most directly meets the need?

  1. Check Routing Engine mastership and protocol reconvergence along with traffic forwarding.
  2. Use the Packet Forwarding Engine for normal packet forwarding decisions.
  3. Treat the SSH session as management traffic terminated by the Routing Engine.
  4. Process the routing-protocol message in the Routing Engine control plane.

Explanation

Correct Answer

D:

Routing protocol packets require software state-machine processing rather than standard through-forwarding. This meets the stated need for ospf control packets.

Incorrect Answers

A:

The control-plane failover verification scenario has a different requirement: Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover. It does not directly meet the ospf control packets need in this question.

B:

The packet forwarding engine data plane scenario has a different requirement: The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. It does not directly meet the ospf control packets need in this question.

C:

The device-destined ssh scenario has a different requirement: SSH to the device is a local management-plane service, not ordinary packet transit forwarding. It does not directly meet the ospf control packets need in this question.

Question 202

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Process the routing-protocol message in the Routing Engine control plane. Which concept or operating procedure is best illustrated?

  1. OSPF control packets
  2. Control-plane failover verification
  3. Packet Forwarding Engine data plane
  4. Device-destined SSH

Explanation

Correct Answer

A:

Routing protocol packets require software state-machine processing rather than standard through-forwarding. This meets the stated need for ospf control packets.

Incorrect Answers

B:

The control-plane failover verification scenario has a different requirement: Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover. It does not directly meet the ospf control packets need in this question.

C:

The packet forwarding engine data plane scenario has a different requirement: The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. It does not directly meet the ospf control packets need in this question.

D:

The device-destined ssh scenario has a different requirement: SSH to the device is a local management-plane service, not ordinary packet transit forwarding. It does not directly meet the ospf control packets need in this question.

Question 203

An OSPF Hello packet reaches a participating router interface and must update neighbor state. The proposed response is: Process the routing-protocol message in the Routing Engine control plane. Which explanation most accurately supports this response?

  1. Routing protocol packets require software state-machine processing rather than standard through-forwarding.
  2. Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover.
  3. The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations.
  4. SSH to the device is a local management-plane service, not ordinary packet transit forwarding.

Explanation

Correct Answer

A:

Routing protocol packets require software state-machine processing rather than standard through-forwarding. This meets the stated need for ospf control packets.

Incorrect Answers

B:

The control-plane failover verification scenario has a different requirement: Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover. It does not directly meet the ospf control packets need in this question.

C:

The packet forwarding engine data plane scenario has a different requirement: The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. It does not directly meet the ospf control packets need in this question.

D:

The device-destined ssh scenario has a different requirement: SSH to the device is a local management-plane service, not ordinary packet transit forwarding. It does not directly meet the ospf control packets need in this question.

Question 204

Within Junos OS Fundamentals, a technician selects this approach: Process the routing-protocol message in the Routing Engine control plane. Which original requirement or fault would most directly justify it?

  1. A dual-RE chassis switchover occurs during a maintenance window and administrators must validate stability.
  2. A received transit packet must be forwarded at hardware speed without a full control-plane lookup on every packet.
  3. An administrator opens an SSH connection to the router's management address.
  4. An OSPF Hello packet reaches a participating router interface and must update neighbor state.

Explanation

Correct Answer

D:

Routing protocol packets require software state-machine processing rather than standard through-forwarding. This meets the stated need for ospf control packets.

Incorrect Answers

A:

The control-plane failover verification scenario has a different requirement: Control-plane redundancy should be evaluated through both processor leadership and the forwarding impact of the switchover. It does not directly meet the ospf control packets need in this question.

B:

The packet forwarding engine data plane scenario has a different requirement: The PFE applies installed forwarding information to transit packets independently of the Routing Engine's protocol computations. It does not directly meet the ospf control packets need in this question.

C:

The device-destined ssh scenario has a different requirement: SSH to the device is a local management-plane service, not ordinary packet transit forwarding. It does not directly meet the ospf control packets need in this question.

Question 205

A router has several candidate routes from different protocols and requires a logical place to store them. Which configuration or troubleshooting action most directly meets the need?

  1. Use PFE encapsulation and decapsulation for supported VXLAN forwarding.
  2. Locate routing protocol and management processing on the Routing Engine.
  3. Let the control plane recalculate routes and install the resulting forwarding updates.
  4. Use a routing table or RIB to represent learned and configured routes.

Explanation

Correct Answer

D:

The RIB retains route candidates and active route decisions used to derive forwarding state. This meets the stated need for routing information base.

Incorrect Answers

A:

The hardware-based vxlan encapsulation scenario has a different requirement: Forwarding hardware can construct or remove tunnel headers according to programmed encapsulation state. It does not directly meet the routing information base need in this question.

B:

The routing engine control plane scenario has a different requirement: The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge. It does not directly meet the routing information base need in this question.

C:

The protocol state propagation scenario has a different requirement: Convergence involves control-plane learning and selection followed by changes to installed data-plane state. It does not directly meet the routing information base need in this question.

Question 206

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Use a routing table or RIB to represent learned and configured routes. Which concept or operating procedure is best illustrated?

  1. Hardware-based VXLAN encapsulation
  2. Routing Engine control plane
  3. Routing Information Base
  4. Protocol state propagation

Explanation

Correct Answer

C:

The RIB retains route candidates and active route decisions used to derive forwarding state. This meets the stated need for routing information base.

Incorrect Answers

A:

The hardware-based vxlan encapsulation scenario has a different requirement: Forwarding hardware can construct or remove tunnel headers according to programmed encapsulation state. It does not directly meet the routing information base need in this question.

B:

The routing engine control plane scenario has a different requirement: The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge. It does not directly meet the routing information base need in this question.

D:

The protocol state propagation scenario has a different requirement: Convergence involves control-plane learning and selection followed by changes to installed data-plane state. It does not directly meet the routing information base need in this question.

Question 207

A router has several candidate routes from different protocols and requires a logical place to store them. The proposed response is: Use a routing table or RIB to represent learned and configured routes. Which explanation most accurately supports this response?

  1. The RIB retains route candidates and active route decisions used to derive forwarding state.
  2. Forwarding hardware can construct or remove tunnel headers according to programmed encapsulation state.
  3. The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge.
  4. Convergence involves control-plane learning and selection followed by changes to installed data-plane state.

Explanation

Correct Answer

A:

The RIB retains route candidates and active route decisions used to derive forwarding state. This meets the stated need for routing information base.

Incorrect Answers

B:

The hardware-based vxlan encapsulation scenario has a different requirement: Forwarding hardware can construct or remove tunnel headers according to programmed encapsulation state. It does not directly meet the routing information base need in this question.

C:

The routing engine control plane scenario has a different requirement: The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge. It does not directly meet the routing information base need in this question.

D:

The protocol state propagation scenario has a different requirement: Convergence involves control-plane learning and selection followed by changes to installed data-plane state. It does not directly meet the routing information base need in this question.

Question 208

Within Junos OS Fundamentals, a technician selects this approach: Use a routing table or RIB to represent learned and configured routes. Which original requirement or fault would most directly justify it?

  1. A supported switch forwards tenant frames through a VXLAN tunnel at line rate.
  2. An administrator needs to identify which Junos component calculates routes and runs the control-plane protocols.
  3. A router has several candidate routes from different protocols and requires a logical place to store them.
  4. A routing daemon learns a changed destination path and the network must converge.

Explanation

Correct Answer

C:

The RIB retains route candidates and active route decisions used to derive forwarding state. This meets the stated need for routing information base.

Incorrect Answers

A:

The hardware-based vxlan encapsulation scenario has a different requirement: Forwarding hardware can construct or remove tunnel headers according to programmed encapsulation state. It does not directly meet the routing information base need in this question.

B:

The routing engine control plane scenario has a different requirement: The Routing Engine executes control-plane functions such as routing protocols and maintains routing knowledge. It does not directly meet the routing information base need in this question.

D:

The protocol state propagation scenario has a different requirement: Convergence involves control-plane learning and selection followed by changes to installed data-plane state. It does not directly meet the routing information base need in this question.

Question 209

A packet needs an egress decision from the set of selected routes rather than all protocol candidates. Which configuration or troubleshooting action most directly meets the need?

  1. Examine forwarding-plane interface drop and error statistics.
  2. Use PFE egress scheduling to implement the intended class-of-service behavior.
  3. Use the forwarding table or FIB populated from selected routing entries.
  4. Deploy supported redundant Routing Engines with appropriate high-availability configuration.

Explanation

Correct Answer

C:

A forwarding table contains information optimized for packet forwarding rather than every route candidate. This meets the stated need for forwarding information base.

Incorrect Answers

A:

The pfe drop counters scenario has a different requirement: Packet drop and hardware error counters help diagnose data-plane loss not visible from protocol adjacency alone. It does not directly meet the forwarding information base need in this question.

B:

The packet queue scheduling scenario has a different requirement: Queue scheduling is a packet-forwarding function that determines transmission order during interface contention. It does not directly meet the forwarding information base need in this question.

D:

The redundant routing engines scenario has a different requirement: RE redundancy provides a standby control processor and supports failover when hardware and features allow. It does not directly meet the forwarding information base need in this question.

Question 210

Within Junos OS Fundamentals, a Junos engineer proposes the following response: Use the forwarding table or FIB populated from selected routing entries. Which concept or operating procedure is best illustrated?

  1. PFE drop counters
  2. Packet queue scheduling
  3. Redundant Routing Engines
  4. Forwarding Information Base

Explanation

Correct Answer

D:

A forwarding table contains information optimized for packet forwarding rather than every route candidate. This meets the stated need for forwarding information base.

Incorrect Answers

A:

The pfe drop counters scenario has a different requirement: Packet drop and hardware error counters help diagnose data-plane loss not visible from protocol adjacency alone. It does not directly meet the forwarding information base need in this question.

B:

The packet queue scheduling scenario has a different requirement: Queue scheduling is a packet-forwarding function that determines transmission order during interface contention. It does not directly meet the forwarding information base need in this question.

C:

The redundant routing engines scenario has a different requirement: RE redundancy provides a standby control processor and supports failover when hardware and features allow. It does not directly meet the forwarding information base need in this question.

Junos, Associate (JNCIA-Junos) (JN0-106) Practice Tests