McAfee-Secured Website

Exam Code: NSE7_SSE_AR-26

Exam Name: Fortinet NSE 7 - FortiSASE 26 Architect

Certification Provider: Fortinet

100% Fortinet NSE7_SSE_AR-26 Guaranteed Success With Testking Training Materials

Get Real NSE7_SSE_AR-26 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

50 Questions & Answers with Testing Engine

"Fortinet NSE 7 - FortiSASE 26 Architect Exam", also known as NSE7_SSE_AR-26 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE7_SSE_AR-26 Exam Engine. Your NSE7_SSE_AR-26 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE7_SSE_AR-26 Practice Test 5

Question 40

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. Which sustained control would best prevent this same failure from recurring?

  1. Include effective-route and egress validation in every DIA rollout runbook.
  2. Review whether transport classes need separate zones when defining the SD-WAN member inventory.
  3. Compare WAN port inventory with zone membership during provisioning QA.
  4. Require independent dual-hub tunnel and route acceptance before production handoff.

Explanation

Correct Answer

A:

This guard addresses the recurring failure mode demonstrated by the case: The routing and steering configuration continues to direct internet-bound traffic through the overlay. It guards the same affected workflow, rather than merely checking that some other service works. A successful controlled outcome would be: An internet test session exits by the branch broadband under the approved inspection policy.

Incorrect Answers

B:

This control is relevant to another scenario in the stated requirement, specifically: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. It would not prevent the present mechanism: The routing and steering configuration continues to direct internet-bound traffic through the overlay. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

C:

This control is relevant to another scenario in the stated requirement, specifically: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. It would not prevent the present mechanism: The routing and steering configuration continues to direct internet-bound traffic through the overlay. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

D:

This control is relevant to another scenario in the stated requirement, specifically: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. It would not prevent the present mechanism: The routing and steering configuration continues to direct internet-bound traffic through the overlay. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

Question 41

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. Given this specific Fortinet deployment or fault, which action should the engineer prioritize to resolve the reported condition?

  1. Separate the links into policy-addressable SD-WAN zones and apply transport-specific firewall controls.
  2. Configure the intended DIA route and steering policy for the public internet SD-WAN zone.
  3. Add the second WAN interface as an SD-WAN member and include it in the intended zone and health checks.
  4. Complete the dual-hub overlay template and route reachability for the second hub.

Explanation

Correct Answer

C:

This is the intended corrective decision for the described condition: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. The underlying issue is that The backup physical link exists but has not been made an eligible SD-WAN member After this action, the specific acceptance evidence should be: Both members appear in SD-WAN monitoring and the secondary can forward traffic when selected.

Incorrect Answers

A:

This is a plausible action for another Deploy SD-WAN infrastructure situation: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. Its target cause is: One shared zone hides the transport distinction from zone-based firewall policy matching. The present case instead needs to address: The backup physical link exists but has not been made an eligible SD-WAN member. It does not directly remediate the actual observed failure.

B:

This is a plausible action for another Deploy SD-WAN infrastructure situation: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. Its target cause is: The routing and steering configuration continues to direct internet-bound traffic through the overlay. The present case instead needs to address: The backup physical link exists but has not been made an eligible SD-WAN member. It does not directly remediate the actual observed failure.

D:

This is a plausible action for another Deploy SD-WAN infrastructure situation: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. Its target cause is: The deployed template implements only one path despite a redundant target architecture. The present case instead needs to address: The backup physical link exists but has not been made an eligible SD-WAN member. It does not directly remediate the actual observed failure.

Question 42

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. After the correction is implemented, which observable result most specifically proves this incident was resolved?

  1. An internet test session exits by the branch broadband under the approved inspection policy.
  2. Simulated loss of hub A produces successful route convergence to hub B for the required networks.
  3. Firewall policy inspection differs correctly between MPLS and broadband without referencing individual physical members.
  4. Both members appear in SD-WAN monitoring and the secondary can forward traffic when selected.

Explanation

Correct Answer

D:

This result directly tests whether the observed failure has cleared: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. It confirms the targeted change, Add the second WAN interface as an SD-WAN member and include it in the intended zone and health checks, rather than a healthy but unrelated component. The technical cause under test is: The backup physical link exists but has not been made an eligible SD-WAN member.

Incorrect Answers

A:

That observation verifies a different Deploy SD-WAN infrastructure condition, namely: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The backup physical link exists but has not been made an eligible SD-WAN member.

B:

That observation verifies a different Deploy SD-WAN infrastructure condition, namely: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The backup physical link exists but has not been made an eligible SD-WAN member.

C:

That observation verifies a different Deploy SD-WAN infrastructure condition, namely: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The backup physical link exists but has not been made an eligible SD-WAN member.

Question 43

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. Which underlying technical cause best explains this precise observed failure?

  1. The backup physical link exists but has not been made an eligible SD-WAN member.
  2. The deployed template implements only one path despite a redundant target architecture.
  3. One shared zone hides the transport distinction from zone-based firewall policy matching.
  4. The routing and steering configuration continues to direct internet-bound traffic through the overlay.

Explanation

Correct Answer

A:

This mechanism directly accounts for the observed condition: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. The aligned correction is: Add the second WAN interface as an SD-WAN member and include it in the intended zone and health checks. A confirming result is: Both members appear in SD-WAN monitoring and the secondary can forward traffic when selected.

Incorrect Answers

B:

This explanation corresponds to an alternative failure context: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: The backup physical link exists but has not been made an eligible SD-WAN member.

C:

This explanation corresponds to an alternative failure context: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: The backup physical link exists but has not been made an eligible SD-WAN member.

D:

This explanation corresponds to an alternative failure context: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: The backup physical link exists but has not been made an eligible SD-WAN member.

Question 44

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. Which sustained control would best prevent this same failure from recurring?

  1. Review whether transport classes need separate zones when defining the SD-WAN member inventory.
  2. Compare WAN port inventory with zone membership during provisioning QA.
  3. Include effective-route and egress validation in every DIA rollout runbook.
  4. Require independent dual-hub tunnel and route acceptance before production handoff.

Explanation

Correct Answer

B:

This guard addresses the recurring failure mode demonstrated by the case: The backup physical link exists but has not been made an eligible SD-WAN member. It guards the same affected workflow, rather than merely checking that some other service works. A successful controlled outcome would be: Both members appear in SD-WAN monitoring and the secondary can forward traffic when selected.

Incorrect Answers

A:

This control is relevant to another scenario in the stated requirement, specifically: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. It would not prevent the present mechanism: The backup physical link exists but has not been made an eligible SD-WAN member. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

C:

This control is relevant to another scenario in the stated requirement, specifically: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. It would not prevent the present mechanism: The backup physical link exists but has not been made an eligible SD-WAN member. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

D:

This control is relevant to another scenario in the stated requirement, specifically: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. It would not prevent the present mechanism: The backup physical link exists but has not been made an eligible SD-WAN member. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

Question 45

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. Given this specific Fortinet deployment or fault, which action should the engineer prioritize to resolve the reported condition?

  1. Separate the links into policy-addressable SD-WAN zones and apply transport-specific firewall controls.
  2. Configure the intended DIA route and steering policy for the public internet SD-WAN zone.
  3. Add the second WAN interface as an SD-WAN member and include it in the intended zone and health checks.
  4. Complete the dual-hub overlay template and route reachability for the second hub.

Explanation

Correct Answer

D:

This is the intended corrective decision for the described condition: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. The underlying issue is that The deployed template implements only one path despite a redundant target architecture After this action, the specific acceptance evidence should be: Simulated loss of hub A produces successful route convergence to hub B for the required networks.

Incorrect Answers

A:

This is a plausible action for another Deploy SD-WAN infrastructure situation: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. Its target cause is: One shared zone hides the transport distinction from zone-based firewall policy matching. The present case instead needs to address: The deployed template implements only one path despite a redundant target architecture. It does not directly remediate the actual observed failure.

B:

This is a plausible action for another Deploy SD-WAN infrastructure situation: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. Its target cause is: The routing and steering configuration continues to direct internet-bound traffic through the overlay. The present case instead needs to address: The deployed template implements only one path despite a redundant target architecture. It does not directly remediate the actual observed failure.

C:

This is a plausible action for another Deploy SD-WAN infrastructure situation: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. Its target cause is: The backup physical link exists but has not been made an eligible SD-WAN member. The present case instead needs to address: The deployed template implements only one path despite a redundant target architecture. It does not directly remediate the actual observed failure.

Question 46

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. After the correction is implemented, which observable result most specifically proves this incident was resolved?

  1. Simulated loss of hub A produces successful route convergence to hub B for the required networks.
  2. An internet test session exits by the branch broadband under the approved inspection policy.
  3. Both members appear in SD-WAN monitoring and the secondary can forward traffic when selected.
  4. Firewall policy inspection differs correctly between MPLS and broadband without referencing individual physical members.

Explanation

Correct Answer

A:

This result directly tests whether the observed failure has cleared: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. It confirms the targeted change, Complete the dual-hub overlay template and route reachability for the second hub, rather than a healthy but unrelated component. The technical cause under test is: The deployed template implements only one path despite a redundant target architecture.

Incorrect Answers

B:

That observation verifies a different Deploy SD-WAN infrastructure condition, namely: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The deployed template implements only one path despite a redundant target architecture.

C:

That observation verifies a different Deploy SD-WAN infrastructure condition, namely: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The deployed template implements only one path despite a redundant target architecture.

D:

That observation verifies a different Deploy SD-WAN infrastructure condition, namely: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The deployed template implements only one path despite a redundant target architecture.

Question 47

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. Which underlying technical cause best explains this precise observed failure?

  1. The backup physical link exists but has not been made an eligible SD-WAN member.
  2. The deployed template implements only one path despite a redundant target architecture.
  3. One shared zone hides the transport distinction from zone-based firewall policy matching.
  4. The routing and steering configuration continues to direct internet-bound traffic through the overlay.

Explanation

Correct Answer

B:

This mechanism directly accounts for the observed condition: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. The aligned correction is: Complete the dual-hub overlay template and route reachability for the second hub. A confirming result is: Simulated loss of hub A produces successful route convergence to hub B for the required networks.

Incorrect Answers

A:

This explanation corresponds to an alternative failure context: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: The deployed template implements only one path despite a redundant target architecture.

C:

This explanation corresponds to an alternative failure context: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: The deployed template implements only one path despite a redundant target architecture.

D:

This explanation corresponds to an alternative failure context: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: The deployed template implements only one path despite a redundant target architecture.

Question 48

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A regional campus has two datacenter hubs, yet its deployment template contains only the first hub's overlay and static routes. Which sustained control would best prevent this same failure from recurring?

  1. Review whether transport classes need separate zones when defining the SD-WAN member inventory.
  2. Include effective-route and egress validation in every DIA rollout runbook.
  3. Require independent dual-hub tunnel and route acceptance before production handoff.
  4. Compare WAN port inventory with zone membership during provisioning QA.

Explanation

Correct Answer

C:

This guard addresses the recurring failure mode demonstrated by the case: The deployed template implements only one path despite a redundant target architecture. It guards the same affected workflow, rather than merely checking that some other service works. A successful controlled outcome would be: Simulated loss of hub A produces successful route convergence to hub B for the required networks.

Incorrect Answers

A:

This control is relevant to another scenario in the stated requirement, specifically: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. It would not prevent the present mechanism: The deployed template implements only one path despite a redundant target architecture. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

B:

This control is relevant to another scenario in the stated requirement, specifically: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. It would not prevent the present mechanism: The deployed template implements only one path despite a redundant target architecture. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

D:

This control is relevant to another scenario in the stated requirement, specifically: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. It would not prevent the present mechanism: The deployed template implements only one path despite a redundant target architecture. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

Question 49

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A field office changed its physical WAN interface label, and automated site deployment now attaches the wrong modem to the monitored SD-WAN member. Given this specific Fortinet deployment or fault, which action should the engineer prioritize to resolve the reported condition?

  1. Correct the device-specific interface mapping before applying the centralized template.
  2. Separate the links into policy-addressable SD-WAN zones and apply transport-specific firewall controls.
  3. Configure the intended DIA route and steering policy for the public internet SD-WAN zone.
  4. Add the second WAN interface as an SD-WAN member and include it in the intended zone and health checks.

Explanation

Correct Answer

A:

This is the intended corrective decision for the described condition: A field office changed its physical WAN interface label, and automated site deployment now attaches the wrong modem to the monitored SD-WAN member. The underlying issue is that The device inventory and template reference different physical ports After this action, the specific acceptance evidence should be: The intended modem is listed as the monitored member and traffic follows the right interface after redeployment.

Incorrect Answers

B:

This is a plausible action for another Deploy SD-WAN infrastructure situation: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. Its target cause is: One shared zone hides the transport distinction from zone-based firewall policy matching. The present case instead needs to address: The device inventory and template reference different physical ports. It does not directly remediate the actual observed failure.

C:

This is a plausible action for another Deploy SD-WAN infrastructure situation: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. Its target cause is: The routing and steering configuration continues to direct internet-bound traffic through the overlay. The present case instead needs to address: The device inventory and template reference different physical ports. It does not directly remediate the actual observed failure.

D:

This is a plausible action for another Deploy SD-WAN infrastructure situation: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. Its target cause is: The backup physical link exists but has not been made an eligible SD-WAN member. The present case instead needs to address: The device inventory and template reference different physical ports. It does not directly remediate the actual observed failure.

Question 50

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A field office changed its physical WAN interface label, and automated site deployment now attaches the wrong modem to the monitored SD-WAN member. After the correction is implemented, which observable result most specifically proves this incident was resolved?

  1. An internet test session exits by the branch broadband under the approved inspection policy.
  2. The intended modem is listed as the monitored member and traffic follows the right interface after redeployment.
  3. Both members appear in SD-WAN monitoring and the secondary can forward traffic when selected.
  4. Firewall policy inspection differs correctly between MPLS and broadband without referencing individual physical members.

Explanation

Correct Answer

B:

This result directly tests whether the observed failure has cleared: A field office changed its physical WAN interface label, and automated site deployment now attaches the wrong modem to the monitored SD-WAN member. It confirms the targeted change, Correct the device-specific interface mapping before applying the centralized template, rather than a healthy but unrelated component. The technical cause under test is: The device inventory and template reference different physical ports.

Incorrect Answers

A:

That observation verifies a different Deploy SD-WAN infrastructure condition, namely: A shop enables direct internet access but its default route still points exclusively to the datacenter tunnel even when broadband is healthy. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The device inventory and template reference different physical ports.

C:

That observation verifies a different Deploy SD-WAN infrastructure condition, namely: A shipping office configures two ISP members but only the primary was added to the SD-WAN zone, so the secondary never carries load. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The device inventory and template reference different physical ports.

D:

That observation verifies a different Deploy SD-WAN infrastructure condition, namely: A branch places trusted MPLS and public broadband in one SD-WAN zone but compliance requires different inspection for traffic on each transport. It could be true even if the current failure persists. In this case the decisive evidence is tied to: The device inventory and template reference different physical ports.

Fortinet NSE 7 - FortiSASE 26 Architect (NSE7_SSE_AR-26) Practice Tests