McAfee-Secured Website

Exam Code: NSE7_SSE_AR-26

Exam Name: Fortinet NSE 7 - FortiSASE 26 Architect

Certification Provider: Fortinet

100% Fortinet NSE7_SSE_AR-26 Guaranteed Success With Testking Training Materials

Get Real NSE7_SSE_AR-26 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

50 Questions & Answers with Testing Engine

"Fortinet NSE 7 - FortiSASE 26 Architect Exam", also known as NSE7_SSE_AR-26 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE7_SSE_AR-26 Exam Engine. Your NSE7_SSE_AR-26 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE7_SSE_AR-26 Practice Test 17

Question 160

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A dual-hub design prefers hub A in normal service, but a BGP route-map continues advertising the same preference even when hub A's link fails its SLA. Which sustained control would best prevent this same failure from recurring?

  1. Include learned-route resolution and forwarding tests in BGP acceptance.
  2. Audit advertised aggregates and explicit exclusions during network segmentation reviews.
  3. Test BGP community or preference changes under controlled SLA degradation.
  4. Validate forwarding-table routes alongside SD-WAN rule hits during acceptance.

Explanation

Correct Answer

C:

This guard addresses the recurring failure mode demonstrated by the case: Route policy does not convey transport-health changes to routing neighbors. It guards the same affected workflow, rather than merely checking that some other service works. A successful controlled outcome would be: A simulated SLA failure changes the learned route preference and branch flows converge to hub B.

Incorrect Answers

A:

This control is relevant to another scenario in the stated requirement, specifically: A spoke's BGP neighbor is established but route next hops for learned application prefixes are unreachable over the selected overlay. It would not prevent the present mechanism: Route policy does not convey transport-health changes to routing neighbors. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

B:

This control is relevant to another scenario in the stated requirement, specifically: A hub advertises internal IP space to spokes using a summary that accidentally includes a prohibited management subnet. It would not prevent the present mechanism: Route policy does not convey transport-health changes to routing neighbors. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

D:

This control is relevant to another scenario in the stated requirement, specifically: An SD-WAN policy selects a healthy member but the forwarding table has no route to the remote finance subnet on that transport. It would not prevent the present mechanism: Route policy does not convey transport-health changes to routing neighbors. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

Question 161

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A regional branch learns identical service prefixes from two hubs but returns some sessions asymmetrically through the wrong hub after failover. Given this specific Fortinet deployment or fault, which action should the engineer prioritize to resolve the reported condition?

  1. Align overlay route preference, return-path policy and session-state behavior across both hubs.
  2. Remove or appropriately track the conflicting stale static route so failover routing can win.
  3. Install the return path within the correct VRF and verify inter-VRF leakage rules remain closed.
  4. Plan for NAT-session state and address changes during egress failover and verify application reconnection behavior.

Explanation

Correct Answer

A:

This is the intended corrective decision for the described condition: A regional branch learns identical service prefixes from two hubs but returns some sessions asymmetrically through the wrong hub after failover. The underlying issue is that Inbound and outbound forwarding preferences were designed independently After this action, the specific acceptance evidence should be: Bidirectional test traffic follows a valid symmetric path after a planned hub outage.

Incorrect Answers

B:

This is a plausible action for another Configure SD-WAN routing situation: A failover test withdraws a hub service route, but the branch retains an obsolete static more-specific route toward the failed hub. Its target cause is: The static longest-prefix route overrides the newly converged dynamic alternate. The present case instead needs to address: Inbound and outbound forwarding preferences were designed independently. It does not directly remediate the actual observed failure.

C:

This is a plausible action for another Configure SD-WAN routing situation: A hosted tenant uses the right SD-WAN overlay but a return route is installed in the global table instead of the tenant VRF. Its target cause is: Forward and return routing were created in different routing contexts. The present case instead needs to address: Inbound and outbound forwarding preferences were designed independently. It does not directly remediate the actual observed failure.

D:

This is a plausible action for another Configure SD-WAN routing situation: A bank fails over an outbound SNAT session to another ISP and expects the old stateful translated session to continue unchanged. Its target cause is: A source-NAT binding may depend on the original egress address and cannot always be moved transparently. The present case instead needs to address: Inbound and outbound forwarding preferences were designed independently. It does not directly remediate the actual observed failure.

Question 162

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A regional branch learns identical service prefixes from two hubs but returns some sessions asymmetrically through the wrong hub after failover. After the correction is implemented, which observable result most specifically proves this incident was resolved?

  1. The tenant traffic returns through its designated VRF without exposing another tenant's routes.
  2. Bidirectional test traffic follows a valid symmetric path after a planned hub outage.
  3. New sessions establish through the surviving ISP with the expected translation, while disrupted old sessions are handled explicitly.
  4. The surviving hub path becomes the installed route for the target service after withdrawal.

Explanation

Correct Answer

B:

This result directly tests whether the observed failure has cleared: A regional branch learns identical service prefixes from two hubs but returns some sessions asymmetrically through the wrong hub after failover. It confirms the targeted change, Align overlay route preference, return-path policy and session-state behavior across both hubs, rather than a healthy but unrelated component. The technical cause under test is: Inbound and outbound forwarding preferences were designed independently.

Incorrect Answers

A:

That observation verifies a different Configure SD-WAN routing condition, namely: A hosted tenant uses the right SD-WAN overlay but a return route is installed in the global table instead of the tenant VRF. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Inbound and outbound forwarding preferences were designed independently.

C:

That observation verifies a different Configure SD-WAN routing condition, namely: A bank fails over an outbound SNAT session to another ISP and expects the old stateful translated session to continue unchanged. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Inbound and outbound forwarding preferences were designed independently.

D:

That observation verifies a different Configure SD-WAN routing condition, namely: A failover test withdraws a hub service route, but the branch retains an obsolete static more-specific route toward the failed hub. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Inbound and outbound forwarding preferences were designed independently.

Question 163

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A regional branch learns identical service prefixes from two hubs but returns some sessions asymmetrically through the wrong hub after failover. Which underlying technical cause best explains this precise observed failure?

  1. A source-NAT binding may depend on the original egress address and cannot always be moved transparently.
  2. The static longest-prefix route overrides the newly converged dynamic alternate.
  3. Inbound and outbound forwarding preferences were designed independently.
  4. Forward and return routing were created in different routing contexts.

Explanation

Correct Answer

C:

This mechanism directly accounts for the observed condition: A regional branch learns identical service prefixes from two hubs but returns some sessions asymmetrically through the wrong hub after failover. The aligned correction is: Align overlay route preference, return-path policy and session-state behavior across both hubs. A confirming result is: Bidirectional test traffic follows a valid symmetric path after a planned hub outage.

Incorrect Answers

A:

This explanation corresponds to an alternative failure context: A bank fails over an outbound SNAT session to another ISP and expects the old stateful translated session to continue unchanged. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Inbound and outbound forwarding preferences were designed independently.

B:

This explanation corresponds to an alternative failure context: A failover test withdraws a hub service route, but the branch retains an obsolete static more-specific route toward the failed hub. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Inbound and outbound forwarding preferences were designed independently.

D:

This explanation corresponds to an alternative failure context: A hosted tenant uses the right SD-WAN overlay but a return route is installed in the global table instead of the tenant VRF. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Inbound and outbound forwarding preferences were designed independently.

Question 164

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A regional branch learns identical service prefixes from two hubs but returns some sessions asymmetrically through the wrong hub after failover. Which sustained control would best prevent this same failure from recurring?

  1. Review static-route exceptions whenever dynamic overlay failover is introduced.
  2. Require VRF-context checks on all overlay route changes involving tenants.
  3. Include NAT session continuity and reconnection expectations in failover runbooks.
  4. Add both-direction traffic tests to dual-hub routing change control.

Explanation

Correct Answer

D:

This guard addresses the recurring failure mode demonstrated by the case: Inbound and outbound forwarding preferences were designed independently. It guards the same affected workflow, rather than merely checking that some other service works. A successful controlled outcome would be: Bidirectional test traffic follows a valid symmetric path after a planned hub outage.

Incorrect Answers

A:

This control is relevant to another scenario in the stated requirement, specifically: A failover test withdraws a hub service route, but the branch retains an obsolete static more-specific route toward the failed hub. It would not prevent the present mechanism: Inbound and outbound forwarding preferences were designed independently. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

B:

This control is relevant to another scenario in the stated requirement, specifically: A hosted tenant uses the right SD-WAN overlay but a return route is installed in the global table instead of the tenant VRF. It would not prevent the present mechanism: Inbound and outbound forwarding preferences were designed independently. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

C:

This control is relevant to another scenario in the stated requirement, specifically: A bank fails over an outbound SNAT session to another ISP and expects the old stateful translated session to continue unchanged. It would not prevent the present mechanism: Inbound and outbound forwarding preferences were designed independently. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

Question 165

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A branch imports a service route from its overlay and accidentally advertises it back to the same BGP domain, creating unstable alternate paths. Given this specific Fortinet deployment or fault, which action should the engineer prioritize to resolve the reported condition?

  1. Constrain advertisements and route-map prefix filters to authorized service networks.
  2. Filter or tag the redistributed prefix to prevent route feedback into its originating overlay.
  3. Install or restore an appropriate route for the remote prefix through the intended overlay member.
  4. Condition BGP advertisement or preference on verified SD-WAN health so the alternate hub can become preferred.

Explanation

Correct Answer

B:

This is the intended corrective decision for the described condition: A branch imports a service route from its overlay and accidentally advertises it back to the same BGP domain, creating unstable alternate paths. The underlying issue is that Route redistribution lacks a loop-prevention boundary After this action, the specific acceptance evidence should be: The route appears where intended but no longer returns as a duplicate learned path.

Incorrect Answers

A:

This is a plausible action for another Configure SD-WAN routing situation: A hub advertises internal IP space to spokes using a summary that accidentally includes a prohibited management subnet. Its target cause is: Route aggregation is broader than the intended reachability policy. The present case instead needs to address: Route redistribution lacks a loop-prevention boundary. It does not directly remediate the actual observed failure.

C:

This is a plausible action for another Configure SD-WAN routing situation: An SD-WAN policy selects a healthy member but the forwarding table has no route to the remote finance subnet on that transport. Its target cause is: Steering eligibility cannot replace missing underlay or overlay routing reachability. The present case instead needs to address: Route redistribution lacks a loop-prevention boundary. It does not directly remediate the actual observed failure.

D:

This is a plausible action for another Configure SD-WAN routing situation: A dual-hub design prefers hub A in normal service, but a BGP route-map continues advertising the same preference even when hub A's link fails its SLA. Its target cause is: Route policy does not convey transport-health changes to routing neighbors. The present case instead needs to address: Route redistribution lacks a loop-prevention boundary. It does not directly remediate the actual observed failure.

Question 166

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A branch imports a service route from its overlay and accidentally advertises it back to the same BGP domain, creating unstable alternate paths. After the correction is implemented, which observable result most specifically proves this incident was resolved?

  1. A route lookup and packet capture both show finance packets exiting the selected overlay.
  2. A simulated SLA failure changes the learned route preference and branch flows converge to hub B.
  3. The route appears where intended but no longer returns as a duplicate learned path.
  4. Spoke route tables include approved applications but exclude the management range.

Explanation

Correct Answer

C:

This result directly tests whether the observed failure has cleared: A branch imports a service route from its overlay and accidentally advertises it back to the same BGP domain, creating unstable alternate paths. It confirms the targeted change, Filter or tag the redistributed prefix to prevent route feedback into its originating overlay, rather than a healthy but unrelated component. The technical cause under test is: Route redistribution lacks a loop-prevention boundary.

Incorrect Answers

A:

That observation verifies a different Configure SD-WAN routing condition, namely: An SD-WAN policy selects a healthy member but the forwarding table has no route to the remote finance subnet on that transport. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Route redistribution lacks a loop-prevention boundary.

B:

That observation verifies a different Configure SD-WAN routing condition, namely: A dual-hub design prefers hub A in normal service, but a BGP route-map continues advertising the same preference even when hub A's link fails its SLA. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Route redistribution lacks a loop-prevention boundary.

D:

That observation verifies a different Configure SD-WAN routing condition, namely: A hub advertises internal IP space to spokes using a summary that accidentally includes a prohibited management subnet. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Route redistribution lacks a loop-prevention boundary.

Question 167

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A branch imports a service route from its overlay and accidentally advertises it back to the same BGP domain, creating unstable alternate paths. Which underlying technical cause best explains this precise observed failure?

  1. Route policy does not convey transport-health changes to routing neighbors.
  2. Route aggregation is broader than the intended reachability policy.
  3. Steering eligibility cannot replace missing underlay or overlay routing reachability.
  4. Route redistribution lacks a loop-prevention boundary.

Explanation

Correct Answer

D:

This mechanism directly accounts for the observed condition: A branch imports a service route from its overlay and accidentally advertises it back to the same BGP domain, creating unstable alternate paths. The aligned correction is: Filter or tag the redistributed prefix to prevent route feedback into its originating overlay. A confirming result is: The route appears where intended but no longer returns as a duplicate learned path.

Incorrect Answers

A:

This explanation corresponds to an alternative failure context: A dual-hub design prefers hub A in normal service, but a BGP route-map continues advertising the same preference even when hub A's link fails its SLA. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Route redistribution lacks a loop-prevention boundary.

B:

This explanation corresponds to an alternative failure context: A hub advertises internal IP space to spokes using a summary that accidentally includes a prohibited management subnet. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Route redistribution lacks a loop-prevention boundary.

C:

This explanation corresponds to an alternative failure context: An SD-WAN policy selects a healthy member but the forwarding table has no route to the remote finance subnet on that transport. It does not account for the particular evidence in the question. The cause actually associated with the described condition is: Route redistribution lacks a loop-prevention boundary.

Question 168

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A branch imports a service route from its overlay and accidentally advertises it back to the same BGP domain, creating unstable alternate paths. Which sustained control would best prevent this same failure from recurring?

  1. Review prefix and route-tag filters whenever overlay redistribution is expanded.
  2. Audit advertised aggregates and explicit exclusions during network segmentation reviews.
  3. Validate forwarding-table routes alongside SD-WAN rule hits during acceptance.
  4. Test BGP community or preference changes under controlled SLA degradation.

Explanation

Correct Answer

A:

This guard addresses the recurring failure mode demonstrated by the case: Route redistribution lacks a loop-prevention boundary. It guards the same affected workflow, rather than merely checking that some other service works. A successful controlled outcome would be: The route appears where intended but no longer returns as a duplicate learned path.

Incorrect Answers

B:

This control is relevant to another scenario in the stated requirement, specifically: A hub advertises internal IP space to spokes using a summary that accidentally includes a prohibited management subnet. It would not prevent the present mechanism: Route redistribution lacks a loop-prevention boundary. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

C:

This control is relevant to another scenario in the stated requirement, specifically: An SD-WAN policy selects a healthy member but the forwarding table has no route to the remote finance subnet on that transport. It would not prevent the present mechanism: Route redistribution lacks a loop-prevention boundary. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

D:

This control is relevant to another scenario in the stated requirement, specifically: A dual-hub design prefers hub A in normal service, but a BGP route-map continues advertising the same preference even when hub A's link fails its SLA. It would not prevent the present mechanism: Route redistribution lacks a loop-prevention boundary. Prevention must be linked to that actual failure mode rather than a generic adjacent control.

Question 169

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A FortiGate policy route sends a diagnostic subnet toward an unavailable member even when the routing table contains a healthy ordinary path. Given this specific Fortinet deployment or fault, which action should the engineer prioritize to resolve the reported condition?

  1. Install the return path within the correct VRF and verify inter-VRF leakage rules remain closed.
  2. Plan for NAT-session state and address changes during egress failover and verify application reconnection behavior.
  3. Review and correct the applicable policy-route priority and next hop for the diagnostic subnet.
  4. Align overlay route preference, return-path policy and session-state behavior across both hubs.

Explanation

Correct Answer

C:

This is the intended corrective decision for the described condition: A FortiGate policy route sends a diagnostic subnet toward an unavailable member even when the routing table contains a healthy ordinary path. The underlying issue is that Policy routing overrides expected ordinary lookup for the matching traffic After this action, the specific acceptance evidence should be: Diagnostic packets follow the intended valid path after policy-route evaluation.

Incorrect Answers

A:

This is a plausible action for another Configure SD-WAN routing situation: A hosted tenant uses the right SD-WAN overlay but a return route is installed in the global table instead of the tenant VRF. Its target cause is: Forward and return routing were created in different routing contexts. The present case instead needs to address: Policy routing overrides expected ordinary lookup for the matching traffic. It does not directly remediate the actual observed failure.

B:

This is a plausible action for another Configure SD-WAN routing situation: A bank fails over an outbound SNAT session to another ISP and expects the old stateful translated session to continue unchanged. Its target cause is: A source-NAT binding may depend on the original egress address and cannot always be moved transparently. The present case instead needs to address: Policy routing overrides expected ordinary lookup for the matching traffic. It does not directly remediate the actual observed failure.

D:

This is a plausible action for another Configure SD-WAN routing situation: A regional branch learns identical service prefixes from two hubs but returns some sessions asymmetrically through the wrong hub after failover. Its target cause is: Inbound and outbound forwarding preferences were designed independently. The present case instead needs to address: Policy routing overrides expected ordinary lookup for the matching traffic. It does not directly remediate the actual observed failure.

Question 170

A Fortinet SD-WAN/FortiSASE operations team encounters the following situation: A FortiGate policy route sends a diagnostic subnet toward an unavailable member even when the routing table contains a healthy ordinary path. After the correction is implemented, which observable result most specifically proves this incident was resolved?

  1. New sessions establish through the surviving ISP with the expected translation, while disrupted old sessions are handled explicitly.
  2. Bidirectional test traffic follows a valid symmetric path after a planned hub outage.
  3. The tenant traffic returns through its designated VRF without exposing another tenant's routes.
  4. Diagnostic packets follow the intended valid path after policy-route evaluation.

Explanation

Correct Answer

D:

This result directly tests whether the observed failure has cleared: A FortiGate policy route sends a diagnostic subnet toward an unavailable member even when the routing table contains a healthy ordinary path. It confirms the targeted change, Review and correct the applicable policy-route priority and next hop for the diagnostic subnet, rather than a healthy but unrelated component. The technical cause under test is: Policy routing overrides expected ordinary lookup for the matching traffic.

Incorrect Answers

A:

That observation verifies a different Configure SD-WAN routing condition, namely: A bank fails over an outbound SNAT session to another ISP and expects the old stateful translated session to continue unchanged. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Policy routing overrides expected ordinary lookup for the matching traffic.

B:

That observation verifies a different Configure SD-WAN routing condition, namely: A regional branch learns identical service prefixes from two hubs but returns some sessions asymmetrically through the wrong hub after failover. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Policy routing overrides expected ordinary lookup for the matching traffic.

C:

That observation verifies a different Configure SD-WAN routing condition, namely: A hosted tenant uses the right SD-WAN overlay but a return route is installed in the global table instead of the tenant VRF. It could be true even if the current failure persists. In this case the decisive evidence is tied to: Policy routing overrides expected ordinary lookup for the matching traffic.

Fortinet NSE 7 - FortiSASE 26 Architect (NSE7_SSE_AR-26) Practice Tests