McAfee-Secured Website

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

100% Fortinet NSE4_FGT_AD-7.6 Guaranteed Success With Testking Training Materials

Get Real NSE4_FGT_AD-7.6 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 49

Question 480

An operations review is verifying a FortiOS 7.6 change. Original problem: A critical application uses a primary private route and an internet VPN backup, but administrators have not tested an actual path failure. The selected remediation was: Trigger a safe primary-path loss and inspect active routes while sending application probes over the backup. Which observation best proves that the requirement to validate installed-route failover with a controlled outage has actually been achieved?

  1. The active routing table prefers wan1 until its route becomes unavailable, when wan2 is installed.
  2. Only the primary route is installed normally, but the tunnel route becomes active during simulated primary loss.
  3. Controlled lookups to a host in the narrower prefix and one outside it select different intended routes.
  4. The primary route is removed, the backup route installs, and probes reach the application within the allowed interval.

Explanation

Correct Answer

D:

Observed control-plane and data-plane failover prove the design. This is the decisive acceptance evidence for the requirement to validate installed-route failover with a controlled outage.

Incorrect Answers

A:

Route transition under failure proves backup distance behavior.

B:

Active-table changes prove the intended backup preference.

C:

Two destinations prove prefix precedence over generic route preference.

Question 481

An engineer sees three routing-table entries for the same subnet but is uncertain whether metric or prefix length matters first. The administrator must evaluate forwarding in the correct order. Which action most directly satisfies the requirement?

  1. Forward 10.20.30.5 through the installed 10.20.0.0/16 route on wan2.
  2. Select the route 10.14.6.96/27 on wan2 for destination 10.14.6.111.
  3. Select the distance-5 route while it is eligible, retaining the distance-15 route as backup.
  4. Select the longest matching destination prefix before considering distance and path preference among equal prefixes.

Explanation

Correct Answer

D:

Prefix specificity precedes administrative distance when selecting the matching destination. In the stated configuration, this directly meets the requirement to evaluate forwarding in the correct order.

Incorrect Answers

A:

The /16 route is a longer matching prefix than /8 regardless of which next hop looks more familiar.

B:

A /27 at .96 covers .96 through .127 and is more specific than the /24.

C:

With equal prefix length, lower administrative distance takes precedence.

Question 482

An operations review is verifying a FortiOS 7.6 change. Original problem: An engineer sees three routing-table entries for the same subnet but is uncertain whether metric or prefix length matters first. The selected remediation was: Select the longest matching destination prefix before considering distance and path preference among equal prefixes. Which observation best proves that the requirement to evaluate forwarding in the correct order has actually been achieved?

  1. Controlled lookups to a host in the narrower prefix and one outside it select different intended routes.
  2. The routing table installs the distance-5 entry and moves to distance-15 only after the preferred path is withdrawn.
  3. Branch traffic uses the target next hop while another /16 subnet resumes its proper route.
  4. Routing lookup for 10.20.30.5 identifies 10.20.0.0/16 and packet capture shows wan2 egress.

Explanation

Correct Answer

A:

Two destinations prove prefix precedence over generic route preference. This is the decisive acceptance evidence for the requirement to evaluate forwarding in the correct order.

Incorrect Answers

B:

Actual installed entries test administrative distance rather than configuration presence.

C:

Positive and negative prefix tests confirm scope restoration.

D:

Lookup plus capture proves actual longest-prefix selection.

Question 483

The FortiGate's route monitor displays a directly connected route for 10.8.4.0/24, while a conflicting static route to 10.8.4.0/24 points to a distant peer. The administrator must avoid using a misleading static route over an existing connected network. Which action most directly satisfies the requirement?

  1. Replace the erroneous /16 with the intended branch /24 route and validate other subnets.
  2. Verify the connected interface network and correct the duplicate or misconfigured static route.
  3. Select the route 10.14.6.96/27 on wan2 for destination 10.14.6.111.
  4. Correct the configured network/prefix and next hop for the 10.24.8.0/21 route if inactive or mistyped.

Explanation

Correct Answer

B:

Connected reachability for an on-link subnet is not normally replaced by a less preferred static entry. In the stated configuration, this directly meets the requirement to avoid using a misleading static route over an existing connected network.

Incorrect Answers

A:

A broad route can capture unrelated destinations that should follow different paths.

C:

A /27 at .96 covers .96 through .127 and is more specific than the /24.

D:

A /21 starting at third octet 8 covers 10.24.8.0 through 10.24.15.255.

Question 484

An operations review is verifying a FortiOS 7.6 change. Original problem: The FortiGate's route monitor displays a directly connected route for 10.8.4.0/24, while a conflicting static route to 10.8.4.0/24 points to a distant peer. The selected remediation was: Verify the connected interface network and correct the duplicate or misconfigured static route. Which observation best proves that the requirement to avoid using a misleading static route over an existing connected network has actually been achieved?

  1. The route appears as active with the intended gateway and packets reach the remote prefix.
  2. Hosts on 10.8.4.0/24 are reached directly over the connected interface without routing through the remote peer.
  3. Route lookup inside the customer VDOM returns the intended partner next hop.
  4. An active route lookup for 10.24.15.200 selects the core /21 route.

Explanation

Correct Answer

B:

A direct neighbor trace confirms the intended local forwarding. This is the decisive acceptance evidence for the requirement to avoid using a misleading static route over an existing connected network.

Incorrect Answers

A:

Active route plus forwarding proves eligibility restored.

C:

Context-specific routing lookup confirms the actual forwarding domain.

D:

The destination tests the full prefix boundary rather than only the first /24.

Question 485

A WAN operator increases a route's priority but expects that to override a lower administrative distance for an identical destination. The administrator must apply the actual routing preference sequence. Which action most directly satisfies the requirement?

  1. Retain wan1 as the lower-distance active default and wan2 as higher-distance standby.
  2. Give the backup tunnel static route a less-preferred administrative distance for that exact destination.
  3. Configure the required route within the customer VDOM's routing table and corresponding interfaces.
  4. Review FortiOS route distance and priority rather than treating a larger priority number as universal precedence.

Explanation

Correct Answer

D:

Distance and priority are distinct preference attributes and one does not override more specific routes. In the stated configuration, this directly meets the requirement to apply the actual routing preference sequence.

Incorrect Answers

A:

Among equally specific routes, administrative distance determines preference.

B:

Equal-prefix routes can form primary/backup sets via administrative distance.

C:

VDOMs maintain logically separate routing tables and policies.

Question 486

An operations review is verifying a FortiOS 7.6 change. Original problem: A WAN operator increases a route's priority but expects that to override a lower administrative distance for an identical destination. The selected remediation was: Review FortiOS route distance and priority rather than treating a larger priority number as universal precedence. Which observation best proves that the requirement to apply the actual routing preference sequence has actually been achieved?

  1. Route lookup chooses wan2 for .111 and wan1 for .130.
  2. Only the primary route is installed normally, but the tunnel route becomes active during simulated primary loss.
  3. The active routing table prefers wan1 until its route becomes unavailable, when wan2 is installed.
  4. The installed route follows the documented distance/priority selection and test sessions exit the expected link.

Explanation

Correct Answer

D:

Active table and packets establish the selection hierarchy. This is the decisive acceptance evidence for the requirement to apply the actual routing preference sequence.

Incorrect Answers

A:

Boundary test addresses verify correct subnet arithmetic.

B:

Active-table changes prove the intended backup preference.

C:

Route transition under failure proves backup distance behavior.

Question 487

An SD-WAN rule should prefer low-latency internet access for video meetings, but the existing member selection ignores latency measurements. The administrator must steer the application using a performance SLA. Which action most directly satisfies the requirement?

  1. Configure a performance SLA with latency, jitter and loss thresholds appropriate to voice traffic.
  2. Use the appropriate SD-WAN application or internet-service match instead of a brittle single static IP list where supported.
  3. Define an SLA probe and SD-WAN service rule selecting members that meet latency and jitter thresholds.
  4. Create a specific SD-WAN service rule for backup flows that selects an appropriate cost/priority member.

Explanation

Correct Answer

C:

Health-aware SD-WAN compares measured link quality against the rule's required SLA. In the stated configuration, this directly meets the requirement to steer the application using a performance SLA.

Incorrect Answers

A:

Acceptable RTT cannot compensate for unacceptable packet loss on a sensitive application.

B:

Application-aware matching can follow known destinations more reliably than one fixed address.

D:

Business applications and bulk backup flows can be treated differently based on rule matching.

Question 488

An operations review is verifying a FortiOS 7.6 change. Original problem: An SD-WAN rule should prefer low-latency internet access for video meetings, but the existing member selection ignores latency measurements. The selected remediation was: Define an SLA probe and SD-WAN service rule selecting members that meet latency and jitter thresholds. Which observation best proves that the requirement to steer the application using a performance SLA has actually been achieved?

  1. When one ISP's latency exceeds threshold, new video sessions use an eligible link and SLA logs explain selection.
  2. The application continues on the surviving eligible member with measured loss, latency and jitter within targets.
  3. Backups use the designated lower-cost member while interactive traffic stays on its preferred path.
  4. Debug output references the intended service rule and new sessions follow its eligible member.

Explanation

Correct Answer

A:

Link-quality and path evidence tie steering to SLA results. This is the decisive acceptance evidence for the requirement to steer the application using a performance SLA.

Incorrect Answers

B:

User experience plus route/SLA telemetry proves operational resilience.

C:

Different session paths confirm app-aware steering.

D:

Rule-ID and egress evidence tie the decision to policy.

Question 489

A branch's two WAN interfaces are physically up, but one cannot reach the public internet and SD-WAN still sends new sessions there. The administrator must stop steering to a path that fails a health check. Which action most directly satisfies the requirement?

  1. Check SLA target reachability, source member, and health-check server before manually forcing all traffic onto the link.
  2. Configure active SD-WAN performance-SLA probing to a reachable representative server for the WAN links.
  3. Define an SLA probe and SD-WAN service rule selecting members that meet latency and jitter thresholds.
  4. Configure the appropriate default route or destination route to the SD-WAN zone and verify reachability.

Explanation

Correct Answer

B:

Interface carrier state does not establish end-to-end path availability. In the stated configuration, this directly meets the requirement to stop steering to a path that fails a health check.

Incorrect Answers

A:

A member is eligible only when configured health tests detect sufficient recovery.

C:

Health-aware SD-WAN compares measured link quality against the rule's required SLA.

D:

Service rules still require routes for forwardable destinations.

Question 490

An operations review is verifying a FortiOS 7.6 change. Original problem: A branch's two WAN interfaces are physically up, but one cannot reach the public internet and SD-WAN still sends new sessions there. The selected remediation was: Configure active SD-WAN performance-SLA probing to a reachable representative server for the WAN links. Which observation best proves that the requirement to stop steering to a path that fails a health check has actually been achieved?

  1. A test internet destination resolves to the SD-WAN zone and reaches its selected member.
  2. A session can use either member according to the SD-WAN rule without changing its security policy.
  3. Link state becomes healthy with measured latency/loss and eligible new flows can use it.
  4. A failed WAN is marked unhealthy and new sessions use the reachable member.

Explanation

Correct Answer

D:

Health state plus session steering verifies loss detection. This is the decisive acceptance evidence for the requirement to stop steering to a path that fails a health check.

Incorrect Answers

A:

Route lookup plus session trace proves routing and steering are connected.

B:

Two eligible egress paths under one rule prove zone abstraction.

C:

Probe recovery and data-plane reuse confirm restoration.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests