McAfee-Secured Website

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

100% Fortinet NSE4_FGT_AD-7.6 Guaranteed Success With Testking Training Materials

Get Real NSE4_FGT_AD-7.6 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 45

Question 440

An operations review is verifying a FortiOS 7.6 change. Original problem: A public service listens on a nonstandard TCP port and the IPS sensor's default protocol filter misses relevant signatures. The selected remediation was: Review IPS sensor filters and supported protocol decoding for that server's nonstandard port. Which observation best proves that the requirement to align IPS filtering to actual application service and port has actually been achieved?

  1. CPU demand falls under the same test load and relevant exploit-test signatures remain blocked.
  2. The controlled exploit on the custom port generates the expected IPS event.
  3. A critical test signature is blocked while a designated lower-risk monitor-only signature records an event.
  4. A controlled authorized exploit test produces an IPS block signature for the server.

Explanation

Correct Answer

B:

Port-specific signature match proves effective selection. This is the decisive acceptance evidence for the requirement to align IPS filtering to actual application service and port.

Incorrect Answers

A:

Performance and coverage comparison demonstrates targeted tuning.

C:

Severity-specific outcomes prove the staged policy.

D:

Signature-level block event proves the permitted port is inspected.

Question 441

IPS scanning is enabled only on east-west traffic while the organization's internet edge is where external exploit attempts arrive. The administrator must attach inspection to the exposed inbound edge policy. Which action most directly satisfies the requirement?

  1. Configure the IPS sensor on the public-inbound permit policy for exposed services.
  2. Identify the actual inbound policy ID and enable the IPS sensor there.
  3. Attach an IPS sensor that blocks signatures relevant to the exposed application and service.
  4. Review IPS sensor filters and supported protocol decoding for that server's nonstandard port.

Explanation

Correct Answer

A:

The firewall cannot block an exploit at a policy where its payload never travels. In the stated configuration, this directly meets the requirement to attach inspection to the exposed inbound edge policy.

Incorrect Answers

B:

Security profile enforcement is policy-specific, not global to every connection.

C:

Port restriction does not stop exploit payloads on the allowed service.

D:

A narrowly filtered sensor may omit signatures if the actual service attributes are different.

Question 442

An operations review is verifying a FortiOS 7.6 change. Original problem: IPS scanning is enabled only on east-west traffic while the organization's internet edge is where external exploit attempts arrive. The selected remediation was: Configure the IPS sensor on the public-inbound permit policy for exposed services. Which observation best proves that the requirement to attach inspection to the exposed inbound edge policy has actually been achieved?

  1. CPU demand falls under the same test load and relevant exploit-test signatures remain blocked.
  2. One controlled attack can be traced from internal source to translated flow and IPS block event.
  3. The legitimate app works while other known IPS tests remain blocked.
  4. The same external test attack triggers the IPS block on the edge ingress rule.

Explanation

Correct Answer

D:

Ingress policy and signature association prove appropriate coverage. This is the decisive acceptance evidence for the requirement to attach inspection to the exposed inbound edge policy.

Incorrect Answers

A:

Performance and coverage comparison demonstrates targeted tuning.

B:

End-to-end event correlation validates attribution.

C:

Both outcomes verify that the exception is narrow.

Question 443

A vulnerability scan produces a burst of IPS alerts but network engineers need to know which rule selected a high severity signature. The administrator must identify the responsible IPS sensor entry. Which action most directly satisfies the requirement?

  1. Review signature ID, severity, target, and the sensor/filter/action associated with the matching policy.
  2. Identify the actual inbound policy ID and enable the IPS sensor there.
  3. Review IPS sensor filters and supported protocol decoding for that server's nonstandard port.
  4. Filter the IPS sensor for the applicable high-critical signature severities with a Block action.

Explanation

Correct Answer

A:

IPS sensor action is determined by the matched entry and configuration rather than severity label alone. In the stated configuration, this directly meets the requirement to identify the responsible IPS sensor entry.

Incorrect Answers

B:

Security profile enforcement is policy-specific, not global to every connection.

C:

A narrowly filtered sensor may omit signatures if the actual service attributes are different.

D:

Risk-scoped filtering supports a phased rollout without blindly blocking all signatures.

Question 444

An operations review is verifying a FortiOS 7.6 change. Original problem: A vulnerability scan produces a burst of IPS alerts but network engineers need to know which rule selected a high severity signature. The selected remediation was: Review signature ID, severity, target, and the sensor/filter/action associated with the matching policy. Which observation best proves that the requirement to identify the responsible IPS sensor entry has actually been achieved?

  1. A controlled test reproduces the named signature and the configured action in the expected policy's event.
  2. The replayed exploit test logs a block under the server's inbound policy.
  3. A critical test signature is blocked while a designated lower-risk monitor-only signature records an event.
  4. Server-targeted test signatures trigger, while irrelevant browser-client signatures are not selected.

Explanation

Correct Answer

A:

Sensor-to-action correlation proves the relevant logic. This is the decisive acceptance evidence for the requirement to identify the responsible IPS sensor entry.

Incorrect Answers

B:

Matching policy and IPS signature demonstrate correct placement.

C:

Severity-specific outcomes prove the staged policy.

D:

Target-specific signature listing and detection prove right-scoping.

Question 445

A FortiGate has routes 10.0.0.0/8 via wan1 and 10.20.0.0/16 via wan2; traffic destined for 10.20.30.5 must use the more specific route. The administrator must select the longest matching prefix for the destination. Which action most directly satisfies the requirement?

  1. Select the route 10.14.6.96/27 on wan2 for destination 10.14.6.111.
  2. Forward 10.20.30.5 through the installed 10.20.0.0/16 route on wan2.
  3. Retain wan1 as the lower-distance active default and wan2 as higher-distance standby.
  4. Configure a static route for the data-center prefix through the reachable private next hop.

Explanation

Correct Answer

B:

The /16 route is a longer matching prefix than /8 regardless of which next hop looks more familiar. In the stated configuration, this directly meets the requirement to select the longest matching prefix for the destination.

Incorrect Answers

A:

A /27 at .96 covers .96 through .127 and is more specific than the /24.

C:

Among equally specific routes, administrative distance determines preference.

D:

A destination-specific static route prevents internal packets from relying on an inappropriate default route.

Question 446

An operations review is verifying a FortiOS 7.6 change. Original problem: A FortiGate has routes 10.0.0.0/8 via wan1 and 10.20.0.0/16 via wan2; traffic destined for 10.20.30.5 must use the more specific route. The selected remediation was: Forward 10.20.30.5 through the installed 10.20.0.0/16 route on wan2. Which observation best proves that the requirement to select the longest matching prefix for the destination has actually been achieved?

  1. The routing table installs the distance-5 entry and moves to distance-15 only after the preferred path is withdrawn.
  2. Route lookup chooses wan2 for .111 and wan1 for .130.
  3. The active routing table prefers wan1 until its route becomes unavailable, when wan2 is installed.
  4. Routing lookup for 10.20.30.5 identifies 10.20.0.0/16 and packet capture shows wan2 egress.

Explanation

Correct Answer

D:

Lookup plus capture proves actual longest-prefix selection. This is the decisive acceptance evidence for the requirement to select the longest matching prefix for the destination.

Incorrect Answers

A:

Actual installed entries test administrative distance rather than configuration presence.

B:

Boundary test addresses verify correct subnet arithmetic.

C:

Route transition under failure proves backup distance behavior.

Question 447

A branch has 192.168.0.0/16 via ISP A and 192.168.40.0/24 via a private tunnel; only traffic for 192.168.40.30 should traverse the tunnel. The administrator must preserve the /24 destination-specific private route. Which action most directly satisfies the requirement?

  1. Replace the erroneous /16 with the intended branch /24 route and validate other subnets.
  2. Use the 192.168.40.0/24 installed route for that destination instead of the broader /16 path.
  3. Forward 10.20.30.5 through the installed 10.20.0.0/16 route on wan2.
  4. Keep the /32 route for 172.16.9.77 via ipsec1 and the /24 route for other subnet hosts.

Explanation

Correct Answer

B:

The /24 route wins because it is more specific for the target private subnet. In the stated configuration, this directly meets the requirement to preserve the /24 destination-specific private route.

Incorrect Answers

A:

A broad route can capture unrelated destinations that should follow different paths.

C:

The /16 route is a longer matching prefix than /8 regardless of which next hop looks more familiar.

D:

A /32 host route is more specific than a /24 network route.

Question 448

An operations review is verifying a FortiOS 7.6 change. Original problem: A branch has 192.168.0.0/16 via ISP A and 192.168.40.0/24 via a private tunnel; only traffic for 192.168.40.30 should traverse the tunnel. The selected remediation was: Use the 192.168.40.0/24 installed route for that destination instead of the broader /16 path. Which observation best proves that the requirement to preserve the /24 destination-specific private route has actually been achieved?

  1. Routing monitor selects the tunnel path for 192.168.40.30 and ISP A for an address outside /24.
  2. 172.16.9.77 uses ipsec1 while 172.16.9.78 follows wan1 under route lookup.
  3. The primary route is removed, the backup route installs, and probes reach the application within the allowed interval.
  4. Branch traffic uses the target next hop while another /16 subnet resumes its proper route.

Explanation

Correct Answer

A:

Two destination checks demonstrate correct prefix distinction. This is the decisive acceptance evidence for the requirement to preserve the /24 destination-specific private route.

Incorrect Answers

B:

Adjacent host checks confirm the host-specific override.

C:

Observed control-plane and data-plane failover prove the design.

D:

Positive and negative prefix tests confirm scope restoration.

Question 449

Two static default routes exist: wan1 distance 10 and wan2 distance 20, both next hops reachable. The administrator must prefer the primary route while keeping a backup. Which action most directly satisfies the requirement?

  1. Verify the connected interface network and correct the duplicate or misconfigured static route.
  2. Retain wan1 as the lower-distance active default and wan2 as higher-distance standby.
  3. Forward 10.20.30.5 through the installed 10.20.0.0/16 route on wan2.
  4. Give the backup tunnel static route a less-preferred administrative distance for that exact destination.

Explanation

Correct Answer

B:

Among equally specific routes, administrative distance determines preference. In the stated configuration, this directly meets the requirement to prefer the primary route while keeping a backup.

Incorrect Answers

A:

Connected reachability for an on-link subnet is not normally replaced by a less preferred static entry.

C:

The /16 route is a longer matching prefix than /8 regardless of which next hop looks more familiar.

D:

Equal-prefix routes can form primary/backup sets via administrative distance.

Question 450

An operations review is verifying a FortiOS 7.6 change. Original problem: Two static default routes exist: wan1 distance 10 and wan2 distance 20, both next hops reachable. The selected remediation was: Retain wan1 as the lower-distance active default and wan2 as higher-distance standby. Which observation best proves that the requirement to prefer the primary route while keeping a backup has actually been achieved?

  1. Route lookup chooses wan2 for .111 and wan1 for .130.
  2. Routing lookup for 10.20.30.5 identifies 10.20.0.0/16 and packet capture shows wan2 egress.
  3. Only the primary route is installed normally, but the tunnel route becomes active during simulated primary loss.
  4. The active routing table prefers wan1 until its route becomes unavailable, when wan2 is installed.

Explanation

Correct Answer

D:

Route transition under failure proves backup distance behavior. This is the decisive acceptance evidence for the requirement to prefer the primary route while keeping a backup.

Incorrect Answers

A:

Boundary test addresses verify correct subnet arithmetic.

B:

Lookup plus capture proves actual longest-prefix selection.

C:

Active-table changes prove the intended backup preference.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests