McAfee-Secured Website

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

100% Fortinet NSE4_FGT_AD-7.6 Guaranteed Success With Testking Training Materials

Get Real NSE4_FGT_AD-7.6 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 26

Question 250

An operations review is verifying a FortiOS 7.6 change. Original problem: A new domain controller was installed without the DC agent used by the site's collector architecture. The selected remediation was: Install/configure the DC Agent on the new controller or explicitly configure supported collector polling. Which observation best proves that the requirement to collect logons from the new controller has actually been achieved?

  1. After adjusting permissions, new domain logons appear in the FSSO monitor with correct source IPs.
  2. The employee's source IP and AD group appear as an active FSSO entry without another interactive portal.
  3. A permitted group member passes while another domain user remains denied on the same service.
  4. A login processed by the new controller appears at the collector and reaches the FortiGate user list.

Explanation

Correct Answer

D:

End-to-end appearance validates coverage of the added controller. This is the decisive acceptance evidence for the requirement to collect logons from the new controller.

Incorrect Answers

A:

A recent login mapped to an IP establishes event visibility was restored.

B:

A live user-to-IP entry proves passive logon collection.

C:

Identity-specific policy outcomes prove authorization scope.

Question 251

The Collector Agent knows an employee's username but shows an incorrect workstation IP because DNS returns an old address. The administrator must repair FSSO workstation-to-IP resolution. Which action most directly satisfies the requirement?

  1. Validate logoff handling and age out/clear stale FSSO entries and related sessions.
  2. Deploy and configure the supported Terminal Server agent to distinguish individual remote sessions.
  3. Confirm collector DNS/IP visibility and matching source address objects for the new client network.
  4. Correct the DNS records and Collector Agent name resolution for the workstation.

Explanation

Correct Answer

D:

FSSO maps logons to source IPs, so stale DNS can map a user to the wrong policy source. In the stated configuration, this directly meets the requirement to repair FSSO workstation-to-IP resolution.

Incorrect Answers

A:

FSSO policy rights must follow the current logon/IP rather than a cached previous user.

B:

Multiple users sharing one terminal server source IP require session-aware user identification.

C:

Healthy collector transport is separate from correct source-to-identity and policy subnet matching.

Question 252

An operations review is verifying a FortiOS 7.6 change. Original problem: The Collector Agent knows an employee's username but shows an incorrect workstation IP because DNS returns an old address. The selected remediation was: Correct the DNS records and Collector Agent name resolution for the workstation. Which observation best proves that the requirement to repair FSSO workstation-to-IP resolution has actually been achieved?

  1. New-subnet users appear at their correct addresses and match the designated identity policy.
  2. The active FSSO record shows the actual client IP and the user receives the intended identity-based rule.
  3. A fresh Windows logon produces an FSSO user-IP entry and corresponding group-scoped policy match.
  4. A reassigned workstation IP is no longer associated with the previous user and cannot use that group's service.

Explanation

Correct Answer

B:

Updated mapping plus policy match proves usable resolution. This is the decisive acceptance evidence for the requirement to repair FSSO workstation-to-IP resolution.

Incorrect Answers

A:

Source accuracy plus rule match validates branch rollout.

C:

Live logon telemetry proves passive SSO data collection.

D:

Loss of the stale entitlement proves revocation works.

Question 253

FortiGate reaches its Collector Agent but no AD group memberships are received, preventing group-scoped policies. The administrator must correct FSSO group collection and filtering. Which action most directly satisfies the requirement?

  1. Inspect Collector Agent group filters and FortiGate connector group-source configuration.
  2. Configure a supported FSSO Terminal Server agent and connect its identity records to the collector.
  3. Set the policy source user group to the approved FSSO group and validate collector group membership.
  4. Attach the appropriate FSSO user group to the traffic policy and enable session logging.

Explanation

Correct Answer

A:

A connection to the collector does not ensure that required AD group memberships are sent. In the stated configuration, this directly meets the requirement to correct FSSO group collection and filtering.

Incorrect Answers

B:

Shared-session environments need a different logon attribution mechanism from ordinary workstation DNS mapping.

C:

Seeing domain users in FSSO monitoring does not automatically authorize them under a specific rule.

D:

FSSO record correlation plus policy identity matching lets FortiGate attribute sessions to users.

Question 254

An operations review is verifying a FortiOS 7.6 change. Original problem: FortiGate reaches its Collector Agent but no AD group memberships are received, preventing group-scoped policies. The selected remediation was: Inspect Collector Agent group filters and FortiGate connector group-source configuration. Which observation best proves that the requirement to correct FSSO group collection and filtering has actually been achieved?

  1. A test access event includes the employee username and intended policy ID.
  2. A permitted group member passes while another domain user remains denied on the same service.
  3. The FortiGate FSSO connector lists the intended group and the member matches the restricted policy.
  4. The active FSSO record shows the actual client IP and the user receives the intended identity-based rule.

Explanation

Correct Answer

C:

Group visibility plus policy action verifies identity propagation. This is the decisive acceptance evidence for the requirement to correct FSSO group collection and filtering.

Incorrect Answers

A:

A user-attributed policy log proves audit coverage.

B:

Identity-specific policy outcomes prove authorization scope.

D:

Updated mapping plus policy match proves usable resolution.

Question 255

A large Windows domain prefers not to install DC agents on every domain controller. The administrator must use supported FSSO polling instead of a separate agent on every DC. Which action most directly satisfies the requirement?

  1. Configure Collector Agent AD polling or FortiGate agentless DC event-log polling with suitable permissions.
  2. Grant the collector/polling service account the minimum rights to read relevant DC logon events.
  3. Install/configure the DC Agent on the new controller or explicitly configure supported collector polling.
  4. Set the correct shared authentication password on the FortiGate's FSSO Agent connector.

Explanation

Correct Answer

A:

Supported polling methods can acquire logon events without per-controller DC agents. In the stated configuration, this directly meets the requirement to use supported FSSO polling instead of a separate agent on every DC.

Incorrect Answers

B:

Without Windows security event access, the collector cannot infer user logons even if network sockets are open.

C:

DC Agent mode needs each relevant controller to forward logon events to its Collector Agent.

D:

Collector Agent communication requires agreed authentication settings as well as IP and port reachability.

Question 256

An operations review is verifying a FortiOS 7.6 change. Original problem: A large Windows domain prefers not to install DC agents on every domain controller. The selected remediation was: Configure Collector Agent AD polling or FortiGate agentless DC event-log polling with suitable permissions. Which observation best proves that the requirement to use supported FSSO polling instead of a separate agent on every DC has actually been achieved?

  1. The employee's source IP and AD group appear as an active FSSO entry without another interactive portal.
  2. Logons on each relevant domain controller appear in FortiGate's user-to-IP mapping.
  3. After adjusting permissions, new domain logons appear in the FSSO monitor with correct source IPs.
  4. The connector reports a healthy authenticated session and populates user-group data.

Explanation

Correct Answer

B:

Multi-controller tests verify coverage without DC Agent deployment. This is the decisive acceptance evidence for the requirement to use supported FSSO polling instead of a separate agent on every DC.

Incorrect Answers

A:

A live user-to-IP entry proves passive logon collection.

C:

A recent login mapped to an IP establishes event visibility was restored.

D:

Authentication plus group delivery validates this connection.

Question 257

A terminal server hosts many employee desktop sessions behind one IP, causing ordinary source-IP FSSO mapping collisions. The administrator must add terminal-server-aware identity attribution. Which action most directly satisfies the requirement?

  1. Validate logoff handling and age out/clear stale FSSO entries and related sessions.
  2. Deploy and configure the supported Terminal Server agent to distinguish individual remote sessions.
  3. Confirm collector DNS/IP visibility and matching source address objects for the new client network.
  4. Check DC Agent-to-Collector Agent communication or the configured AD polling method and FortiGate external connector.

Explanation

Correct Answer

B:

Multiple users sharing one terminal server source IP require session-aware user identification. In the stated configuration, this directly meets the requirement to add terminal-server-aware identity attribution.

Incorrect Answers

A:

FSSO policy rights must follow the current logon/IP rather than a cached previous user.

C:

Healthy collector transport is separate from correct source-to-identity and policy subnet matching.

D:

FSSO requires actual logon collection plus identity propagation, not just LDAP connectivity.

Question 258

An operations review is verifying a FortiOS 7.6 change. Original problem: A terminal server hosts many employee desktop sessions behind one IP, causing ordinary source-IP FSSO mapping collisions. The selected remediation was: Deploy and configure the supported Terminal Server agent to distinguish individual remote sessions. Which observation best proves that the requirement to add terminal-server-aware identity attribution has actually been achieved?

  1. A login processed by the new controller appears at the collector and reaches the FortiGate user list.
  2. Two Citrix users with different groups are recognized separately and receive correct policy decisions.
  3. A reassigned workstation IP is no longer associated with the previous user and cannot use that group's service.
  4. Two concurrent users on the same host receive their own group-appropriate policy outcomes.

Explanation

Correct Answer

D:

Distinct policy results under one server IP prove terminal-session mapping. This is the decisive acceptance evidence for the requirement to add terminal-server-aware identity attribution.

Incorrect Answers

A:

End-to-end appearance validates coverage of the added controller.

B:

Identity separation confirms the terminal service integration.

C:

Loss of the stale entitlement proves revocation works.

Question 259

The FSSO Collector Agent stops working and FortiGate loses user identities despite the DCs still producing login events. The administrator must implement and verify Collector Agent resilience. Which action most directly satisfies the requirement?

  1. Configure a supported FSSO Terminal Server agent and connect its identity records to the collector.
  2. Inspect Collector Agent group filters and FortiGate connector group-source configuration.
  3. Configure a compatible additional Collector Agent endpoint and order it for failover.
  4. Set the correct shared authentication password on the FortiGate's FSSO Agent connector.

Explanation

Correct Answer

C:

FortiGate can use alternate collectors when the primary is unreachable and both receive necessary logons. In the stated configuration, this directly meets the requirement to implement and verify Collector Agent resilience.

Incorrect Answers

A:

Shared-session environments need a different logon attribution mechanism from ordinary workstation DNS mapping.

B:

A connection to the collector does not ensure that required AD group memberships are sent.

D:

Collector Agent communication requires agreed authentication settings as well as IP and port reachability.

Question 260

An operations review is verifying a FortiOS 7.6 change. Original problem: The FSSO Collector Agent stops working and FortiGate loses user identities despite the DCs still producing login events. The selected remediation was: Configure a compatible additional Collector Agent endpoint and order it for failover. Which observation best proves that the requirement to implement and verify Collector Agent resilience has actually been achieved?

  1. A login processed by the new controller appears at the collector and reaches the FortiGate user list.
  2. The FortiGate FSSO connector lists the intended group and the member matches the restricted policy.
  3. Disabling the primary collector still allows new users to appear via the backup collector.
  4. The connector reports a healthy authenticated session and populates user-group data.

Explanation

Correct Answer

C:

New logon propagation during failure proves actual redundancy. This is the decisive acceptance evidence for the requirement to implement and verify Collector Agent resilience.

Incorrect Answers

A:

End-to-end appearance validates coverage of the added controller.

B:

Group visibility plus policy action verifies identity propagation.

D:

Authentication plus group delivery validates this connection.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests