McAfee-Secured Website

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

100% Fortinet NSE4_FGT_AD-7.6 Guaranteed Success With Testking Training Materials

Get Real NSE4_FGT_AD-7.6 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

94 Questions & Answers with Testing Engine

"Fortinet NSE 4 - FortiOS 7.6 Administrator Exam", also known as NSE4_FGT_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE4_FGT_AD-7.6 Exam Engine. Your NSE4_FGT_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 17

Question 160

An operations review is verifying a FortiOS 7.6 change. Original problem: A security rule accepts traffic between two VLANs but fails for IPv6 packets from the same endpoints. The selected remediation was: Verify an IPv6-capable firewall policy and source/destination IPv6 addressing for the affected flow. Which observation best proves that the requirement to configure a policy that matches the actual IP version has actually been achieved?

  1. An IPv6 test packet matches the intended policy while IPv4 behavior remains unchanged.
  2. Debug flow identifies the new policy on the intended VLAN pair and the application connection succeeds.
  3. The lookup identifies the matching rule and after the targeted fix the API flow is accepted.
  4. The resolved address object contains the new server IP and traffic matches the expected policy.

Explanation

Correct Answer

A:

Per-protocol matching confirms correct IP-family handling. This is the decisive acceptance evidence for the requirement to configure a policy that matches the actual IP version.

Incorrect Answers

B:

Matched interface pair plus observed flow proves rule applicability.

C:

Matching the complete five-tuple and rule ID confirms correct diagnosis.

D:

DNS object membership plus policy match proves correct dynamic destination mapping.

Question 161

A new FortiGate is configured in NGFW policy-based mode, but the administrator expects separate profile-based application-control settings on the policy. The administrator must use security controls appropriate to the enabled NGFW mode. Which action most directly satisfies the requirement?

  1. Change the destination interface in the security policy to the appropriate SD-WAN zone selected by routing.
  2. Compare the policy's configured flow/proxy mode with the security profiles and application behavior.
  3. Express application and URL-category requirements directly in policy-based NGFW security rules and their related authentication/SSL pre-match rules.
  4. Configure the required permit policy and attach the IPS sensor to that policy with the appropriate inspection mode.

Explanation

Correct Answer

C:

Policy-based NGFW mode differs from profile-based inspection configuration and uses central NAT. In the stated configuration, this directly meets the requirement to use security controls appropriate to the enabled NGFW mode.

Incorrect Answers

A:

Matching an interface not used by the routed path prevents the intended policy from selecting.

B:

Proxy and flow inspection use different traffic handling and some profiles or protocols require matching mode settings.

D:

A denied flow never reaches permitted application inspection by the proposed IPS sensor.

Question 162

An operations review is verifying a FortiOS 7.6 change. Original problem: A new FortiGate is configured in NGFW policy-based mode, but the administrator expects separate profile-based application-control settings on the policy. The selected remediation was: Express application and URL-category requirements directly in policy-based NGFW security rules and their related authentication/SSL pre-match rules. Which observation best proves that the requirement to use security controls appropriate to the enabled NGFW mode has actually been achieved?

  1. The lookup identifies the matching rule and after the targeted fix the API flow is accepted.
  2. Repeated controlled sessions pass with the selected supported profile and maintain the intended security event coverage.
  3. Known application traffic follows the application rule, and its policy logs show the correct classification.
  4. The protected server traffic is decrypted and inspected, while unrelated HTTPS remains certificate-only.

Explanation

Correct Answer

C:

Application recognition and policy action verify mode-appropriate enforcement. This is the decisive acceptance evidence for the requirement to use security controls appropriate to the enabled NGFW mode.

Incorrect Answers

A:

Matching the complete five-tuple and rule ID confirms correct diagnosis.

B:

Application success plus security events validates the profile-mode correction.

D:

Different outcomes per policy prove inspection scope is selective.

Question 163

A data center application requires deep inspection only for a particular server group, while other traffic should retain certificate-only inspection. The administrator must scope TLS inspection at the applicable security policy. Which action most directly satisfies the requirement?

  1. Add the service object for the documented extra port to the application policy rather than permitting ALL services.
  2. Compare the policy's configured flow/proxy mode with the security profiles and application behavior.
  3. Attach the correct SSL/SSH inspection profile to the policy for the server group, leaving other policies unchanged.
  4. Configure the required permit policy and attach the IPS sensor to that policy with the appropriate inspection mode.

Explanation

Correct Answer

C:

Security-profile selection is policy-scoped and need not change the global inspection behavior. In the stated configuration, this directly meets the requirement to scope TLS inspection at the applicable security policy.

Incorrect Answers

A:

Service matching is exact unless the policy explicitly includes both required protocols and ports.

B:

Proxy and flow inspection use different traffic handling and some profiles or protocols require matching mode settings.

D:

A denied flow never reaches permitted application inspection by the proposed IPS sensor.

Question 164

An operations review is verifying a FortiOS 7.6 change. Original problem: A data center application requires deep inspection only for a particular server group, while other traffic should retain certificate-only inspection. The selected remediation was: Attach the correct SSL/SSH inspection profile to the policy for the server group, leaving other policies unchanged. Which observation best proves that the requirement to scope TLS inspection at the applicable security policy has actually been achieved?

  1. The database test generates an allowed session with the exact policy ID and service in traffic logs.
  2. The protected server traffic is decrypted and inspected, while unrelated HTTPS remains certificate-only.
  3. Repeated controlled sessions pass with the selected supported profile and maintain the intended security event coverage.
  4. Benign application traffic is accepted and a known controlled IPS test triggers the configured signature action.

Explanation

Correct Answer

B:

Different outcomes per policy prove inspection scope is selective. This is the decisive acceptance evidence for the requirement to scope TLS inspection at the applicable security policy.

Incorrect Answers

A:

A matched accept event proves logging on the correct rule.

C:

Application success plus security events validates the profile-mode correction.

D:

The two outcomes verify forwarding plus security inspection.

Question 165

Users report intermittent application resets after a proxy-based inspection profile was attached to a rule that previously used flow inspection. The administrator must check inspection-mode compatibility and application requirements. Which action most directly satisfies the requirement?

  1. Express application and URL-category requirements directly in policy-based NGFW security rules and their related authentication/SSL pre-match rules.
  2. Verify the FQDN address object resolves to the current destination IP and FortiGate DNS operates correctly.
  3. Attach the correct SSL/SSH inspection profile to the policy for the server group, leaving other policies unchanged.
  4. Compare the policy's configured flow/proxy mode with the security profiles and application behavior.

Explanation

Correct Answer

D:

Proxy and flow inspection use different traffic handling and some profiles or protocols require matching mode settings. In the stated configuration, this directly meets the requirement to check inspection-mode compatibility and application requirements.

Incorrect Answers

A:

Policy-based NGFW mode differs from profile-based inspection configuration and uses central NAT.

B:

FQDN address rules depend on DNS resolution and cached address membership rather than text matching alone.

C:

Security-profile selection is policy-scoped and need not change the global inspection behavior.

Question 166

An operations review is verifying a FortiOS 7.6 change. Original problem: Users report intermittent application resets after a proxy-based inspection profile was attached to a rule that previously used flow inspection. The selected remediation was: Compare the policy's configured flow/proxy mode with the security profiles and application behavior. Which observation best proves that the requirement to check inspection-mode compatibility and application requirements has actually been achieved?

  1. A traffic event carries the policy ID and descriptive name associated with a controlled request.
  2. Repeated controlled sessions pass with the selected supported profile and maintain the intended security event coverage.
  3. The protected server traffic is decrypted and inspected, while unrelated HTTPS remains certificate-only.
  4. Known application traffic follows the application rule, and its policy logs show the correct classification.

Explanation

Correct Answer

B:

Application success plus security events validates the profile-mode correction. This is the decisive acceptance evidence for the requirement to check inspection-mode compatibility and application requirements.

Incorrect Answers

A:

Unambiguous log linkage confirms useful policy telemetry.

C:

Different outcomes per policy prove inspection scope is selective.

D:

Application recognition and policy action verify mode-appropriate enforcement.

Question 167

A developer cannot reach an API even though the destination address appears in a policy's destination object list. The administrator must identify the first matching security rule and service criterion. Which action most directly satisfies the requirement?

  1. Set the policy source interface to the client VLAN and destination interface to the routed server VLAN.
  2. Narrow the maintenance rule's address objects and services, and place normal inspection below only where appropriate.
  3. Use policy lookup/debug flow with source, destination, ports and interface pair before altering address objects.
  4. Add the service object for the documented extra port to the application policy rather than permitting ALL services.

Explanation

Correct Answer

C:

An address membership match alone does not guarantee service, interface or earlier-policy acceptance. In the stated configuration, this directly meets the requirement to identify the first matching security rule and service criterion.

Incorrect Answers

A:

Policy selection includes the incoming and outgoing interfaces and cannot be satisfied by address objects alone.

B:

An unconstrained top-of-list exception can shadow security profiles on subsequent rules.

D:

Service matching is exact unless the policy explicitly includes both required protocols and ports.

Question 168

An operations review is verifying a FortiOS 7.6 change. Original problem: A developer cannot reach an API even though the destination address appears in a policy's destination object list. The selected remediation was: Use policy lookup/debug flow with source, destination, ports and interface pair before altering address objects. Which observation best proves that the requirement to identify the first matching security rule and service criterion has actually been achieved?

  1. A payroll client connects on TCP 8443, but an unrelated subnet and another TCP port fail.
  2. A user in the group is permitted while a nonmember at the same subnet is rejected.
  3. The lookup identifies the matching rule and after the targeted fix the API flow is accepted.
  4. The named maintenance host can reach the target service, while an unrelated client hits the inspected policy.

Explanation

Correct Answer

C:

Matching the complete five-tuple and rule ID confirms correct diagnosis. This is the decisive acceptance evidence for the requirement to identify the first matching security rule and service criterion.

Incorrect Answers

A:

Both positive and negative cases test the complete policy match criteria.

B:

Comparing identities at the same network position isolates group enforcement.

D:

Distinct policy IDs for the two test clients demonstrate containment of the exception.

Question 169

A policy is intended to block outbound traffic only during a nightly maintenance window, but currently applies continuously. The administrator must implement time-bound policy matching. Which action most directly satisfies the requirement?

  1. Assign an appropriate recurring schedule object to the specific rule instead of leaving the schedule Always.
  2. Narrow the maintenance rule's address objects and services, and place normal inspection below only where appropriate.
  3. Configure the required permit policy and attach the IPS sensor to that policy with the appropriate inspection mode.
  4. Give the specific policy a descriptive name and enable traffic logging with the policy identifier.

Explanation

Correct Answer

A:

FortiGate policy schedules control when that particular policy can match. In the stated configuration, this directly meets the requirement to implement time-bound policy matching.

Incorrect Answers

B:

An unconstrained top-of-list exception can shadow security profiles on subsequent rules.

C:

A denied flow never reaches permitted application inspection by the proposed IPS sensor.

D:

Descriptive rule names and logs let analysts correlate sessions to the intended business service.

Question 170

An operations review is verifying a FortiOS 7.6 change. Original problem: A policy is intended to block outbound traffic only during a nightly maintenance window, but currently applies continuously. The selected remediation was: Assign an appropriate recurring schedule object to the specific rule instead of leaving the schedule Always. Which observation best proves that the requirement to implement time-bound policy matching has actually been achieved?

  1. Identical controlled requests are blocked inside the window and evaluated against the next policy outside it.
  2. Benign application traffic is accepted and a known controlled IPS test triggers the configured signature action.
  3. The named maintenance host can reach the target service, while an unrelated client hits the inspected policy.
  4. The protected server traffic is decrypted and inspected, while unrelated HTTPS remains certificate-only.

Explanation

Correct Answer

A:

Different time-bound results prove the schedule condition is active. This is the decisive acceptance evidence for the requirement to implement time-bound policy matching.

Incorrect Answers

B:

The two outcomes verify forwarding plus security inspection.

C:

Distinct policy IDs for the two test clients demonstrate containment of the exception.

D:

Different outcomes per policy prove inspection scope is selective.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests