McAfee-Secured Website

Exam Code: FCP_FAZ_AN-7.6

Exam Name: Fortinet NSE 5 - FortiAnalyzer 7.6 Analyst

Certification Provider: Fortinet

Corresponding Certification: NSE5

100% Fortinet FCP_FAZ_AN-7.6 Guaranteed Success With Testking Training Materials

Get Real FCP_FAZ_AN-7.6 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

63 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiAnalyzer 7.6 Analyst Exam", also known as FCP_FAZ_AN-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date FCP_FAZ_AN-7.6 Exam Engine. Your FCP_FAZ_AN-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet FCP_FAZ_AN-7.6 Practice Test 31

Question 300

An analyst plans the following FortiAnalyzer response: Check event handler incident-generation settings and whether the event has been promoted or automatically raised into an incident. Which original investigation or operational requirement is best matched to that response?

  1. The security report shows fewer events than the unfiltered archive for the same date.
  2. A dashboard labels a client as the top traffic source, but the analyst incorrectly assumes it also generated the most security incidents.
  3. A junior analyst assumes every event alert automatically creates an incident ticket in the SOC case queue.
  4. A compromised host may have crossed two site firewalls, producing similar alerts from separate devices.

Explanation

Correct Answer

C:

Events and incidents are distinct workflow objects; automatic incident creation depends on handler configuration. This directly addresses the scenario through event and incident distinction.

Incorrect Answers

A:

Raw archive and SQL-indexed analytical views can disagree when indexing, source scope, or retention differs. That choice concerns analytics log count discrepancy rather than the requested event and incident distinction.

B:

FortiView byte rankings do not inherently measure malicious activity or the number of incident tickets. That choice concerns top sources versus event count rather than the requested event and incident distinction.

D:

A shared host and signature can be observed by multiple sensors; device context prevents double-counting assumptions. That choice concerns device-specific incident comparison rather than the requested event and incident distinction.

Question 301

An analyst wants a single detection rule that generates an event when a defined login-failure condition occurs in the relevant logs. Which FortiAnalyzer analyst action most directly addresses the requirement?

  1. Allow the automatic incident process to open a new case for the newly detected subject after closure.
  2. Create a basic event handler with a rule matching the required login event fields and threshold.
  3. Place the distinct alternative rules in an appropriate basic event handler and verify their OR behavior.
  4. Configure the appropriate correlation handler conditions with an AND_NOT operator for the authorized exception.

Explanation

Correct Answer

B:

Basic event handlers generate events when qualifying rule conditions are met, making them appropriate for a straightforward independent detection. This directly addresses the scenario through basic event handler for repeated failures.

Incorrect Answers

A:

A closed prior case does not indefinitely suppress future incidents of the same subject. That choice concerns auto-raised incident after closure rather than the requested basic event handler for repeated failures.

C:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. That choice concerns basic handler multiple-rule alternatives rather than the requested basic event handler for repeated failures.

D:

AND_NOT correlation logic excludes cases meeting the prohibited secondary condition while retaining the primary suspicious signal. That choice concerns correlation and_not exclusion rather than the requested basic event handler for repeated failures.

Question 302

In a FortiAnalyzer 7.6 SOC review, a team recommends: Create a basic event handler with a rule matching the required login event fields and threshold. Which analytical or operational concept is this intended to address?

  1. Auto-raised incident after closure
  2. Basic handler multiple-rule alternatives
  3. Correlation AND_NOT exclusion
  4. Basic event handler for repeated failures

Explanation

Correct Answer

D:

Basic event handlers generate events when qualifying rule conditions are met, making them appropriate for a straightforward independent detection. This directly addresses the scenario through basic event handler for repeated failures.

Incorrect Answers

A:

A closed prior case does not indefinitely suppress future incidents of the same subject. That choice concerns auto-raised incident after closure rather than the requested basic event handler for repeated failures.

B:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. That choice concerns basic handler multiple-rule alternatives rather than the requested basic event handler for repeated failures.

C:

AND_NOT correlation logic excludes cases meeting the prohibited secondary condition while retaining the primary suspicious signal. That choice concerns correlation and_not exclusion rather than the requested basic event handler for repeated failures.

Question 303

An analyst wants a single detection rule that generates an event when a defined login-failure condition occurs in the relevant logs. The proposed response is: Create a basic event handler with a rule matching the required login event fields and threshold. Which explanation best justifies that response?

  1. A closed prior case does not indefinitely suppress future incidents of the same subject.
  2. Basic event handlers generate events when qualifying rule conditions are met, making them appropriate for a straightforward independent detection.
  3. Separate rules inside a basic handler are alternatives, so one matching rule can generate an event.
  4. AND_NOT correlation logic excludes cases meeting the prohibited secondary condition while retaining the primary suspicious signal.

Explanation

Correct Answer

B:

Basic event handlers generate events when qualifying rule conditions are met, making them appropriate for a straightforward independent detection. This directly addresses the scenario through basic event handler for repeated failures.

Incorrect Answers

A:

A closed prior case does not indefinitely suppress future incidents of the same subject. That choice concerns auto-raised incident after closure rather than the requested basic event handler for repeated failures.

C:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. That choice concerns basic handler multiple-rule alternatives rather than the requested basic event handler for repeated failures.

D:

AND_NOT correlation logic excludes cases meeting the prohibited secondary condition while retaining the primary suspicious signal. That choice concerns correlation and_not exclusion rather than the requested basic event handler for repeated failures.

Question 304

An analyst plans the following FortiAnalyzer response: Create a basic event handler with a rule matching the required login event fields and threshold. Which original investigation or operational requirement is best matched to that response?

  1. An analyst wants a single detection rule that generates an event when a defined login-failure condition occurs in the relevant logs.
  2. A new malicious event appears with the same subject as an incident that the SOC already marked Closed.
  3. A detection should trigger if either a malicious DNS event or a critical intrusion event is observed, without requiring both together.
  4. A security team wants to alert on suspicious activity only when supporting evidence does not indicate an approved maintenance exception.

Explanation

Correct Answer

A:

Basic event handlers generate events when qualifying rule conditions are met, making them appropriate for a straightforward independent detection. This directly addresses the scenario through basic event handler for repeated failures.

Incorrect Answers

B:

A closed prior case does not indefinitely suppress future incidents of the same subject. That choice concerns auto-raised incident after closure rather than the requested basic event handler for repeated failures.

C:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. That choice concerns basic handler multiple-rule alternatives rather than the requested basic event handler for repeated failures.

D:

AND_NOT correlation logic excludes cases meeting the prohibited secondary condition while retaining the primary suspicious signal. That choice concerns correlation and_not exclusion rather than the requested basic event handler for repeated failures.

Question 305

A detection should trigger if either a malicious DNS event or a critical intrusion event is observed, without requiring both together. Which FortiAnalyzer analyst action most directly addresses the requirement?

  1. Verify that the handler and its relevant rules are enabled before changing their match expressions.
  2. Adjust the handler's data selector so the relevant device, log category, and event scope are used.
  3. Clone the predefined event handler, then customize the cloned handler's filtering and severity settings.
  4. Place the distinct alternative rules in an appropriate basic event handler and verify their OR behavior.

Explanation

Correct Answer

D:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. This directly addresses the scenario through basic handler multiple-rule alternatives.

Incorrect Answers

A:

A disabled detection cannot generate new events regardless of how well its rule text matches incoming logs. That choice concerns event handler rule enablement rather than the requested basic handler multiple-rule alternatives.

B:

Data selection determines which log streams participate in the detection and can reduce unnecessary processing and false alerts. That choice concerns event handler data selector rather than the requested basic handler multiple-rule alternatives.

C:

Cloning retains a tested starting point and provides editable custom settings while preserving the protected predefined item. That choice concerns predefined handler customization rather than the requested basic handler multiple-rule alternatives.

Question 306

In a FortiAnalyzer 7.6 SOC review, a team recommends: Place the distinct alternative rules in an appropriate basic event handler and verify their OR behavior. Which analytical or operational concept is this intended to address?

  1. Event handler rule enablement
  2. Basic handler multiple-rule alternatives
  3. Event handler data selector
  4. Predefined handler customization

Explanation

Correct Answer

B:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. This directly addresses the scenario through basic handler multiple-rule alternatives.

Incorrect Answers

A:

A disabled detection cannot generate new events regardless of how well its rule text matches incoming logs. That choice concerns event handler rule enablement rather than the requested basic handler multiple-rule alternatives.

C:

Data selection determines which log streams participate in the detection and can reduce unnecessary processing and false alerts. That choice concerns event handler data selector rather than the requested basic handler multiple-rule alternatives.

D:

Cloning retains a tested starting point and provides editable custom settings while preserving the protected predefined item. That choice concerns predefined handler customization rather than the requested basic handler multiple-rule alternatives.

Question 307

A detection should trigger if either a malicious DNS event or a critical intrusion event is observed, without requiring both together. The proposed response is: Place the distinct alternative rules in an appropriate basic event handler and verify their OR behavior. Which explanation best justifies that response?

  1. Separate rules inside a basic handler are alternatives, so one matching rule can generate an event.
  2. A disabled detection cannot generate new events regardless of how well its rule text matches incoming logs.
  3. Data selection determines which log streams participate in the detection and can reduce unnecessary processing and false alerts.
  4. Cloning retains a tested starting point and provides editable custom settings while preserving the protected predefined item.

Explanation

Correct Answer

A:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. This directly addresses the scenario through basic handler multiple-rule alternatives.

Incorrect Answers

B:

A disabled detection cannot generate new events regardless of how well its rule text matches incoming logs. That choice concerns event handler rule enablement rather than the requested basic handler multiple-rule alternatives.

C:

Data selection determines which log streams participate in the detection and can reduce unnecessary processing and false alerts. That choice concerns event handler data selector rather than the requested basic handler multiple-rule alternatives.

D:

Cloning retains a tested starting point and provides editable custom settings while preserving the protected predefined item. That choice concerns predefined handler customization rather than the requested basic handler multiple-rule alternatives.

Question 308

An analyst plans the following FortiAnalyzer response: Place the distinct alternative rules in an appropriate basic event handler and verify their OR behavior. Which original investigation or operational requirement is best matched to that response?

  1. A custom event handler exists in the configuration but produces no alerts even when qualifying logs are present.
  2. A handler applies the correct suspicious-activity conditions but evaluates an overly broad set of input records.
  3. An analyst wants to modify the filtering expression of a Fortinet-supplied detection whose core fields cannot be edited directly.
  4. A detection should trigger if either a malicious DNS event or a critical intrusion event is observed, without requiring both together.

Explanation

Correct Answer

D:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. This directly addresses the scenario through basic handler multiple-rule alternatives.

Incorrect Answers

A:

A disabled detection cannot generate new events regardless of how well its rule text matches incoming logs. That choice concerns event handler rule enablement rather than the requested basic handler multiple-rule alternatives.

B:

Data selection determines which log streams participate in the detection and can reduce unnecessary processing and false alerts. That choice concerns event handler data selector rather than the requested basic handler multiple-rule alternatives.

C:

Cloning retains a tested starting point and provides editable custom settings while preserving the protected predefined item. That choice concerns predefined handler customization rather than the requested basic handler multiple-rule alternatives.

Question 309

Analysts need an alert only when repeated failed authentication is followed by a successful privileged login within a defined window. Which FortiAnalyzer analyst action most directly addresses the requirement?

  1. Build a correlation event handler that applies the necessary rule sequence and FOLLOWED_BY relationship.
  2. Place the distinct alternative rules in an appropriate basic event handler and verify their OR behavior.
  3. Model the finding and expected follow-up with an appropriate NOT_FOLLOWED_BY correlation condition.
  4. Enable Automatically Create Incident on the selected FortiAnalyzer event handler.

Explanation

Correct Answer

A:

Correlation handlers evaluate relationships among events and can detect ordered multi-step patterns unavailable to one simple independent rule. This directly addresses the scenario through correlation handler ordered sequence.

Incorrect Answers

B:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. That choice concerns basic handler multiple-rule alternatives rather than the requested correlation handler ordered sequence.

C:

NOT_FOLLOWED_BY logic detects absence of the anticipated subsequent event rather than a simple simultaneous match. That choice concerns correlation not_followed_by detection rather than the requested correlation handler ordered sequence.

D:

FortiAnalyzer 7.6 can raise incidents from handler-generated events when this specific option is enabled. That choice concerns automatic incident generation rather than the requested correlation handler ordered sequence.

Question 310

In a FortiAnalyzer 7.6 SOC review, a team recommends: Build a correlation event handler that applies the necessary rule sequence and FOLLOWED_BY relationship. Which analytical or operational concept is this intended to address?

  1. Basic handler multiple-rule alternatives
  2. Correlation NOT_FOLLOWED_BY detection
  3. Correlation handler ordered sequence
  4. Automatic incident generation

Explanation

Correct Answer

C:

Correlation handlers evaluate relationships among events and can detect ordered multi-step patterns unavailable to one simple independent rule. This directly addresses the scenario through correlation handler ordered sequence.

Incorrect Answers

A:

Separate rules inside a basic handler are alternatives, so one matching rule can generate an event. That choice concerns basic handler multiple-rule alternatives rather than the requested correlation handler ordered sequence.

B:

NOT_FOLLOWED_BY logic detects absence of the anticipated subsequent event rather than a simple simultaneous match. That choice concerns correlation not_followed_by detection rather than the requested correlation handler ordered sequence.

D:

FortiAnalyzer 7.6 can raise incidents from handler-generated events when this specific option is enabled. That choice concerns automatic incident generation rather than the requested correlation handler ordered sequence.

Fortinet NSE 5 - FortiAnalyzer 7.6 Analyst (FCP_FAZ_AN-7.6) Practice Tests