McAfee-Secured Website

Exam Bundle

Exam Code: N10-009

Exam Name CompTIA Network+

Certification Provider: CompTIA

Corresponding Certification: CompTIA Network+

CompTIA N10-009 Bundle $44.99

100% CompTIA N10-009 Guaranteed Success With Testking Training Materials

Get Real N10-009 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    N10-009 Questions & Answers

    768 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual N10-009 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • N10-009 Video Course

    N10-009 Video Course

    240 Video Lectures

    N10-009 Video Course is developed by CompTIA Professionals to help you pass the N10-009 exam.

    Description

    This course will improve your knowledge and skills required to pass CompTIA Network+ exam.
  • Study Guide

    N10-009 Study Guide

    128 PDF Pages

    Developed by industry experts, this 128-page guide spells out in painstaking detail all of the information you need to ace N10-009 exam.

CompTIA Network+ (N10-009) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    768 Questions

    $124.99
  • N10-009 Video Course

    Video Course

    240 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    128 PDF Pages

    $29.99

CompTIA N10-009 Practice Test 12

Question 110

An IT team leases virtual machines with control of OS patches but the cloud provider owns physical servers. Which next action best addresses the stated networking problem?

  1. Select a SaaS mail service with identity, retention and data access governance.
  2. Classify the service as IaaS and define guest-OS responsibilities separately from provider hardware duties.
  3. Use a suitable NAT gateway and routing for outbound-only IPv4 connections.
  4. Evaluate a dedicated private provider connectivity service with redundant paths and route controls.

Explanation

Correct Answer

B:

This action addresses the specific requirement because in IaaS the customer retains significant operating-system and application administration. The independent acceptance check is: A responsibility map assigns OS security updates to the customer and datacenter hardware to the provider.

Incorrect Answers

A:

This action addresses a different situation: A business consumes centrally hosted email through a browser and wants minimal mailbox server maintenance. It would not directly resolve the current network requirement because in IaaS the customer retains significant operating-system and application administration.

C:

This action addresses a different situation: Cloud instances without public IPv4 addresses need outbound patch downloads but must not accept unsolicited internet sessions. It would not directly resolve the current network requirement because in IaaS the customer retains significant operating-system and application administration.

D:

This action addresses a different situation: A company needs continuous private network transport from its headquarters to cloud workloads, independent of internet VPN performance. It would not directly resolve the current network requirement because in IaaS the customer retains significant operating-system and application administration.

Question 111

An enterprise portal fails only when accessed by name after its DNS CNAME target was deleted. After the change, which result is most relevant to the original failure?

  1. The laptop learns the intended default router and reaches permitted off-subnet IPv6 targets without admitting rogue advertisements.
  2. The hostname returns the intended address and browser access works.
  3. Lease free-count stays healthy through peak arrival and valid clients get addresses.
  4. A name query returns the expected host without dangling aliases.

Explanation

Correct Answer

D:

The intended action is: Repair the alias target chain and verify the final A/AAAA resolution. This works because a CNAME must ultimately resolve to a valid reachable name/address.

Incorrect Answers

A:

This choice would test a different networking condition: An IPv6 laptop loses its default gateway after a switch ACL begins filtering router advertisements and neighbor discovery. Its related action is: Allow legitimate ICMPv6 router advertisements and neighbor discovery on the local segment while blocking rogue sources.

B:

This choice would test a different networking condition: All clients in one subnet can reach the IP of a website but cannot resolve its FQDN. Its related action is: Check resolver addresses, DNS queries and zone records rather than default-route forwarding alone.

C:

This choice would test a different networking condition: A DHCP scope exhausts addresses at 9 a.m. because wireless guests retain week-long leases after leaving. Its related action is: Resize the eligible scope or shorten guest lease duration to reflect churn.

Question 112

A remote application fails across several routers and an engineer needs to locate the first hop where the path changes. Which post-change test best demonstrates that the problem is resolved?

  1. The test identifies the exact faulty pair and a replacement passes verification.
  2. Path output identifies the suspect hop while independent tests account for filtered ICMP responses.
  3. The expected endpoint appears as ESTABLISHED with the correct destination port.
  4. The corrected IP maps consistently to the authorized interface across hosts.

Explanation

Correct Answer

B:

The intended action is: Use traceroute/tracert and corroborating router path information. This works because tTL-expiry probes can reveal an approximate hop sequence toward the destination.

Incorrect Answers

A:

This choice would test a different networking condition: A field installer must determine whether a copper cable is open, shorted or miswired. Its related action is: Use a cable wiremap/continuity tester or qualifying cable certifier.

C:

This choice would test a different networking condition: A Windows client can reach a host but wants to see which TCP connections are established to that server. Its related action is: Inspect netstat or PowerShell Get-NetTCPConnection for local ports and states.

D:

This choice would test a different networking condition: A local switch may have the wrong MAC neighbor associated with a duplicate IPv4 address. Its related action is: Check ARP/neighbor cache and correlate MAC learning information on the switch.

Question 113

A single-mode circuit receives far more optical power than its short-reach receiver allows after amplifier work. Which solution best satisfies the technical constraint without introducing unrelated changes?

  1. Validate receive-power limits and use an approved attenuator or correct optic to avoid overload.
  2. Match compatible speed/duplex configuration or restore correct autonegotiation.
  3. Shorten/restructure the horizontal link or add a compliant active distribution point.
  4. Replace moisture-damaged cabling/terminations and protect the entrance from water.

Explanation

Correct Answer

A:

This action addresses the specific requirement because optical receivers have both minimum and maximum input-power limits. The independent acceptance check is: Receive power falls within the supported range and error rate stabilizes.

Incorrect Answers

B:

This action addresses a different situation: A switch port negotiates half duplex while the host uses full duplex and many late collisions appear. It would not directly resolve the current network requirement because optical receivers have both minimum and maximum input-power limits.

C:

This action addresses a different situation: A 110-meter permanent copper run repeatedly fails 1-Gbps certification. It would not directly resolve the current network requirement because optical receivers have both minimum and maximum input-power limits.

D:

This action addresses a different situation: An outdoor cable develops errors after rain and technicians find corrosion inside a patch panel. It would not directly resolve the current network requirement because optical receivers have both minimum and maximum input-power limits.

Question 114

A remote office needs 14 host IPs but a /28 plan includes 14 endpoints plus one separate gateway. Which recommendation most directly resolves the documented network issue?

  1. Select a larger subnet than /28, such as /27, when the gateway needs a 15th usable IP.
  2. Diagnose DHCP failure rather than route the APIPA address across the organization.
  3. Treat 192.168.50.64 as network, .127 as broadcast and .65 through .126 as usable.
  4. Assign a /26 for 60 usable-host need and a suitable small point-to-point prefix for two endpoints.

Explanation

Correct Answer

A:

This action addresses the specific requirement because a /28 has 16 addresses but only 14 traditional usable hosts. The independent acceptance check is: All endpoints and the gateway obtain unique addresses without exhausting the subnet.

Incorrect Answers

B:

This action addresses a different situation: A small site assigns 169.254.42.6/16 after its DHCP server becomes unreachable. It would not directly resolve the current network requirement because a /28 has 16 addresses but only 14 traditional usable hosts.

C:

This action addresses a different situation: An IPAM system allocates 192.168.50.64/26 and staff disagree about the last usable address. It would not directly resolve the current network requirement because a /28 has 16 addresses but only 14 traditional usable hosts.

D:

This action addresses a different situation: A VLSM plan gives a 60-host site a /27 and a two-host link a /25, wasting addresses and blocking growth. It would not directly resolve the current network requirement because a /28 has 16 addresses but only 14 traditional usable hosts.

Question 115

Clients reach two local VLANs but the route to an external site disappears after a routing-policy change. Select the most defensible networking decision for this case.

  1. Plan TTL reduction ahead of the next cutover and flush/expire caches where authorized.
  2. Inspect relevant route-table entries and next hops, restoring the authorized destination route.
  3. Resize the eligible scope or shorten guest lease duration to reflect churn.
  4. Validate the chain of trust and repair signed-zone key/DS alignment.

Explanation

Correct Answer

B:

This action addresses the specific requirement because incorrect or missing routing state can break only off-site destinations. The independent acceptance check is: The required prefix appears in the forwarding table and traffic follows the intended next hop.

Incorrect Answers

A:

This action addresses a different situation: An application uses stale DNS after cutover because clients cache a long TTL for an old address. It would not directly resolve the current network requirement because incorrect or missing routing state can break only off-site destinations.

C:

This action addresses a different situation: A DHCP scope exhausts addresses at 9 a.m. because wireless guests retain week-long leases after leaving. It would not directly resolve the current network requirement because incorrect or missing routing state can break only off-site destinations.

D:

This action addresses a different situation: A link's DNSSEC-enabled resolver rejects one domain after a mismatched DS/DNSKEY rollover. It would not directly resolve the current network requirement because incorrect or missing routing state can break only off-site destinations.

Question 116

An upgrade changes the routing design but engineers keep only a screenshot of the old physical switch layout. What acceptance result confirms the specified networking requirement is met?

  1. A sample outage is counted consistently by customer and provider under the agreed SLA.
  2. A peer can locate the next hop and its physical uplink from the synchronized records.
  3. An independent technician traces the affected patch using the documentation without trial-and-error unplugging.
  4. Survey measurements meet the planned RSSI, capacity and roaming thresholds.

Explanation

Correct Answer

B:

The intended action is: Update logical route maps and physical diagrams under the same change record. This works because topology documentation must distinguish network function from equipment placement.

Incorrect Answers

A:

This choice would test a different networking condition: A support contract has an uptime target but does not define measurement window or excluded maintenance. Its related action is: Specify service-level indicators, target thresholds and measurement/exclusion rules in the SLA.

C:

This choice would test a different networking condition: A field technician patches a fiber port but the logical topology shows no rack location or cable ID for the link. Its related action is: Maintain physical rack/cable maps alongside logical Layer 2 and Layer 3 diagrams.

D:

This choice would test a different networking condition: A Wi-Fi expansion is approved using floor square footage but no signal strength or capacity study. Its related action is: Perform and document a predictive/active wireless survey and generate a heat map.

Question 117

A technician confirms an incorrect VLAN assignment but plans to keep testing DNS without correcting the known defect. What acceptance result confirms the specified networking requirement is met?

  1. The suspect port is isolated without disconnecting unrelated users.
  2. The host receives correct VLAN reachability and the initial incident is no longer reproducible.
  3. The incident record identifies reproducible impact conditions and a clearly defined affected population.
  4. Provider staff can reproduce the fault using the supplied path and counters.

Explanation

Correct Answer

B:

The intended action is: Implement the validated VLAN correction through approved change process and retest the original symptom. This works because once a theory is confirmed, corrective action should target the root cause.

Incorrect Answers

A:

This choice would test a different networking condition: A proposed fix requires resetting every switch in the building to test whether one access port is faulty. Its related action is: Use a low-impact targeted test or escalate before taking disruptive action.

C:

This choice would test a different networking condition: A help desk ticket says 'network slow' without location, time, affected services or recent changes. Its related action is: Begin with symptom collection, affected scope, user questions and recent-change inventory.

D:

This choice would test a different networking condition: An incident team has inconclusive packet captures and no permission to change a provider router. Its related action is: Escalate with gathered evidence, clear affected scope and measured timestamps to the authorized owner.

Question 118

A support contract has an uptime target but does not define measurement window or excluded maintenance. Which post-change test best demonstrates that the problem is resolved?

  1. A sample outage is counted consistently by customer and provider under the agreed SLA.
  2. The change record contains successful postchecks and a tested route back to the original firmware.
  3. A lab restore reproduces the intended VLAN and routing configuration from the latest protected backup.
  4. A configuration diff traces each priority change to an approved request and tested result.

Explanation

Correct Answer

A:

The intended action is: Specify service-level indicators, target thresholds and measurement/exclusion rules in the SLA. This works because service guarantees require measurable definitions rather than vague availability claims.

Incorrect Answers

B:

This choice would test a different networking condition: A router firmware update is scheduled directly in production without a prior backup or rollback procedure. Its related action is: Use formal change management with approved window, validated backup, prechecks and rollback steps.

C:

This choice would test a different networking condition: A core switch loses its running configuration on reboot because only its startup state was backed up months ago. Its related action is: Schedule authenticated configuration backups and test restore integrity after significant changes.

D:

This choice would test a different networking condition: An engineer changes switch spanning-tree priorities through a personal script without a ticket or peer review. Its related action is: Route configuration changes through controlled approvals, versioned baselines and audit records.

Question 119

A site replaces its switch stack but existing cable maps still refer to demolished floors. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Route configuration changes through controlled approvals, versioned baselines and audit records.
  2. Update rack diagrams, port maps and the decommission inventory as part of site cutover.
  3. Reconcile hardware/software asset inventory with warranty, license and accountable support owners.
  4. Schedule authenticated configuration backups and test restore integrity after significant changes.

Explanation

Correct Answer

B:

This action addresses the specific requirement because physical traceability requires retiring obsolete infrastructure records. The independent acceptance check is: A spot check matches random live ports to their true patch panel and room locations.

Incorrect Answers

A:

This action addresses a different situation: An engineer changes switch spanning-tree priorities through a personal script without a ticket or peer review. It would not directly resolve the current network requirement because physical traceability requires retiring obsolete infrastructure records.

C:

This action addresses a different situation: A new monitoring tool discovers devices but lacks serial numbers, licensing status and owners. It would not directly resolve the current network requirement because physical traceability requires retiring obsolete infrastructure records.

D:

This action addresses a different situation: A core switch loses its running configuration on reboot because only its startup state was backed up months ago. It would not directly resolve the current network requirement because physical traceability requires retiring obsolete infrastructure records.

Question 120

A router's CPU spikes only when control-plane traffic is flooded, while data links show modest bandwidth. What is the most appropriate network configuration or troubleshooting action for this requirement?

  1. Check tunnel overhead and end-to-end path MTU, then adjust MSS or MTU appropriately.
  2. Inspect control-plane punt rates and implement appropriate rate limits and routing protocol protection.
  3. Correct return-path symmetry and state synchronization where required.
  4. Align roaming SSID security profiles and validate the authentication/transition design.

Explanation

Correct Answer

B:

This action addresses the specific requirement because packet processing saturation can impair routing without saturating raw link capacity. The independent acceptance check is: Control-plane CPU recovers and legitimate routing adjacencies remain stable during controlled test load.

Incorrect Answers

A:

This action addresses a different situation: A firewall logs many small packets dropped after a tunnel was added, especially with the DF bit set. It would not directly resolve the current network requirement because packet processing saturation can impair routing without saturating raw link capacity.

C:

This action addresses a different situation: A website has low throughput only during asymmetric traffic across a stateful firewall pair. It would not directly resolve the current network requirement because packet processing saturation can impair routing without saturating raw link capacity.

D:

This action addresses a different situation: A wireless client roams but disconnects every time it crosses between floors with unmatched encryption policies. It would not directly resolve the current network requirement because packet processing saturation can impair routing without saturating raw link capacity.