McAfee-Secured Website

Exam Bundle

Exam Code: 350-901

Exam Name Designing, Deploying, and Managing Network Automation Systems

Certification Provider: Cisco

Corresponding Certification: DevNet Professional

Cisco 350-901 Bundle $25.00

100% Cisco 350-901 Guaranteed Success With Testking Training Materials

Get Real 350-901 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-901 Questions & Answers

    604 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-901 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-901 Video Course

    350-901 Video Course

    106 Video Lectures

    350-901 Video Course is developed by Cisco Professionals to help you pass the 350-901 exam.

    Description

    This course will improve your knowledge and skills required to pass Designing, Deploying, and Managing Network Automation Systems exam.

Designing, Deploying, and Managing Network Automation Systems (350-901) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    604 Questions

    $124.99
  • 350-901 Video Course

    Video Course

    106 Video Lectures

    $39.99

Cisco 350-901 Practice Test 87

Question 860

A research hospital architecture group is working on compliance-controlled network change recommendations. A retrospective identifies: a maintenance-run pyATS job becomes stuck when a device is unreachable. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that expected adjacency reaches the accepted state before the deadline; flag recurrence if a post-deploy pyATS job runs before routing protocols finish converging.
  2. Check that the diff identifies only intended OSPF adjacency changes; flag recurrence if a pyATS post-change check cannot determine whether the OSPF neighbor state regressed.
  3. Check that an isolated offline node causes a bounded, diagnosable failure rather than an endless run; flag recurrence if a maintenance-run pyATS job becomes stuck when a device is unreachable.
  4. Check that CLI validation connects to the intended approved production device set; flag recurrence if a pyATS check accidentally collects interface data from a lab emulator instead of production.

Explanation

Correct Answer

C:

The check tests the restored condition, an isolated offline node causes a bounded, diagnosable failure rather than an endless run, and explicitly flags a recurrence of a maintenance-run pyATS job becomes stuck when a device is unreachable.

Incorrect Answers

A:

This guard monitors a different regression trigger: a post-deploy pyATS job runs before routing protocols finish converging. It does not directly validate the recovery condition, an isolated offline node causes a bounded, diagnosable failure rather than an endless run.

B:

This guard monitors a different regression trigger: a pyATS post-change check cannot determine whether the OSPF neighbor state regressed. It does not directly validate the recovery condition, an isolated offline node causes a bounded, diagnosable failure rather than an endless run.

D:

This guard monitors a different regression trigger: a pyATS check accidentally collects interface data from a lab emulator instead of production. It does not directly validate the recovery condition, an isolated offline node causes a bounded, diagnosable failure rather than an endless run.

Question 861

An online retail infrastructure team is working on application connectivity and PCI-scoped ACL maintenance. During deployment, pyATS can parse route summaries but compares changing counters as if they were stable config. Which action most directly addresses this specific network automation problem?

  1. Compare only required route invariants and exclude or bound volatile counters.
  2. Select a supported Genie parser and compare normalized semantic fields.
  3. Make failed pyATS assertions propagate to the CI stage result.
  4. Save structured pyATS output with approved revision, testbed and timestamp identifiers.

Explanation

Correct Answer

A:

The observed failure is: pyATS can parse route summaries but compares changing counters as if they were stable config. The underlying cause is: the baseline includes volatile operational fields without a tolerance policy. Verify that replayed normal traffic variation does not produce false configuration-regression alarms.

Incorrect Answers

B:

This would address a different condition: a Genie parsed output test fails because a new OS release changes CLI spacing. Here, the actual issue is: the baseline includes volatile operational fields without a tolerance policy; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a CLI validation job exits successfully despite failing one required ACL assertion. Here, the actual issue is: the baseline includes volatile operational fields without a tolerance policy; it needs a scoped correction rather than this unrelated intervention.

D:

This would address a different condition: a reviewer cannot trace validation results to the deployed Git commit. Here, the actual issue is: the baseline includes volatile operational fields without a tolerance policy; it needs a scoped correction rather than this unrelated intervention.

Question 862

An online retail infrastructure team is working on application connectivity and PCI-scoped ACL maintenance. The team found that pyATS can parse route summaries but compares changing counters as if they were stable config. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Equivalent device state passes despite harmless whitespace changes.
  2. Each test artifact maps to the deployed change and pre/post observations.
  3. Replayed normal traffic variation does not produce false configuration-regression alarms.
  4. Invalid ACL test fails the job and blocks deployment promotion.

Explanation

Correct Answer

C:

This evidence directly verifies the scoped correction, compare only required route invariants and exclude or bound volatile counters, for the underlying issue: the baseline includes volatile operational fields without a tolerance policy. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from a Genie parsed output test fails because a new OS release changes CLI spacing, not necessarily from the reported incident. For the specified issue the relevant confirmation is: replayed normal traffic variation does not produce false configuration-regression alarms.

B:

This would confirm recovery from a reviewer cannot trace validation results to the deployed Git commit, not necessarily from the reported incident. For the specified issue the relevant confirmation is: replayed normal traffic variation does not produce false configuration-regression alarms.

D:

This would confirm recovery from a CLI validation job exits successfully despite failing one required ACL assertion, not necessarily from the reported incident. For the specified issue the relevant confirmation is: replayed normal traffic variation does not produce false configuration-regression alarms.

Question 863

An online retail infrastructure team is working on application connectivity and PCI-scoped ACL maintenance. The team observes that pyATS can parse route summaries but compares changing counters as if they were stable config. Which underlying mechanism best explains this failure?

  1. Validation uses brittle line-based string matching rather than structured parsed data.
  2. The baseline includes volatile operational fields without a tolerance policy.
  3. The script catches assertion failures and suppresses a nonzero process status.
  4. The test evidence stores only a generic PASS string and no build identifiers.

Explanation

Correct Answer

B:

This mechanism explains the reported observation, pyATS can parse route summaries but compares changing counters as if they were stable config. The targeted response is to compare only required route invariants and exclude or bound volatile counters; the expected confirming result is that replayed normal traffic variation does not produce false configuration-regression alarms.

Incorrect Answers

A:

That mechanism fits a different symptom: a Genie parsed output test fails because a new OS release changes CLI spacing. The reported condition instead points to the baseline includes volatile operational fields without a tolerance policy.

C:

That mechanism fits a different symptom: a CLI validation job exits successfully despite failing one required ACL assertion. The reported condition instead points to the baseline includes volatile operational fields without a tolerance policy.

D:

That mechanism fits a different symptom: a reviewer cannot trace validation results to the deployed Git commit. The reported condition instead points to the baseline includes volatile operational fields without a tolerance policy.

Question 864

An online retail infrastructure team is working on application connectivity and PCI-scoped ACL maintenance. A retrospective identifies: pyATS can parse route summaries but compares changing counters as if they were stable config. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that equivalent device state passes despite harmless whitespace changes; flag recurrence if a Genie parsed output test fails because a new OS release changes CLI spacing.
  2. Check that invalid ACL test fails the job and blocks deployment promotion; flag recurrence if a CLI validation job exits successfully despite failing one required ACL assertion.
  3. Check that each test artifact maps to the deployed change and pre/post observations; flag recurrence if a reviewer cannot trace validation results to the deployed Git commit.
  4. Check that replayed normal traffic variation does not produce false configuration-regression alarms; flag recurrence if pyATS can parse route summaries but compares changing counters as if they were stable config.

Explanation

Correct Answer

D:

The check tests the restored condition, replayed normal traffic variation does not produce false configuration-regression alarms, and explicitly flags a recurrence of pyATS can parse route summaries but compares changing counters as if they were stable config.

Incorrect Answers

A:

This guard monitors a different regression trigger: a Genie parsed output test fails because a new OS release changes CLI spacing. It does not directly validate the recovery condition, replayed normal traffic variation does not produce false configuration-regression alarms.

B:

This guard monitors a different regression trigger: a CLI validation job exits successfully despite failing one required ACL assertion. It does not directly validate the recovery condition, replayed normal traffic variation does not produce false configuration-regression alarms.

C:

This guard monitors a different regression trigger: a reviewer cannot trace validation results to the deployed Git commit. It does not directly validate the recovery condition, replayed normal traffic variation does not produce false configuration-regression alarms.

Question 865

A smart-factory integrator is working on industrial VLAN and OSPF reconfiguration. During deployment, the same pyATS check passes in development but fails on a second device platform. Which action most directly addresses this specific network automation problem?

  1. Configure appropriate connection timeouts and explicit unreachable-device handling.
  2. Collect structured before and after state with explicit acceptance invariants.
  3. Use platform-appropriate testbed definitions and supported parsers per device family.
  4. Assign a scoped read-only service identity where supported and protect access tokens.

Explanation

Correct Answer

C:

The observed failure is: the same pyATS check passes in development but fails on a second device platform. The underlying cause is: platform aliases and parser support were not validated for the new operating system. Verify that equivalent route-state tests pass on each qualified device platform.

Incorrect Answers

A:

This would address a different condition: a maintenance-run pyATS job becomes stuck when a device is unreachable. Here, the actual issue is: platform aliases and parser support were not validated for the new operating system; it needs a scoped correction rather than this unrelated intervention.

B:

This would address a different condition: a pyATS post-change check cannot determine whether the OSPF neighbor state regressed. Here, the actual issue is: platform aliases and parser support were not validated for the new operating system; it needs a scoped correction rather than this unrelated intervention.

D:

This would address a different condition: a pyATS validation run uses an unrestricted admin account for simple show commands. Here, the actual issue is: platform aliases and parser support were not validated for the new operating system; it needs a scoped correction rather than this unrelated intervention.

Question 866

A smart-factory integrator is working on industrial VLAN and OSPF reconfiguration. The team found that the same pyATS check passes in development but fails on a second device platform. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Required checks pass with limited permissions and no elevated credential exposure.
  2. Equivalent route-state tests pass on each qualified device platform.
  3. An isolated offline node causes a bounded, diagnosable failure rather than an endless run.
  4. The diff identifies only intended OSPF adjacency changes.

Explanation

Correct Answer

B:

This evidence directly verifies the scoped correction, use platform-appropriate testbed definitions and supported parsers per device family, for the underlying issue: platform aliases and parser support were not validated for the new operating system. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from a pyATS validation run uses an unrestricted admin account for simple show commands, not necessarily from the reported incident. For the specified issue the relevant confirmation is: equivalent route-state tests pass on each qualified device platform.

C:

This would confirm recovery from a maintenance-run pyATS job becomes stuck when a device is unreachable, not necessarily from the reported incident. For the specified issue the relevant confirmation is: equivalent route-state tests pass on each qualified device platform.

D:

This would confirm recovery from a pyATS post-change check cannot determine whether the OSPF neighbor state regressed, not necessarily from the reported incident. For the specified issue the relevant confirmation is: equivalent route-state tests pass on each qualified device platform.

Question 867

A smart-factory integrator is working on industrial VLAN and OSPF reconfiguration. The team observes that the same pyATS check passes in development but fails on a second device platform. Which underlying mechanism best explains this failure?

  1. Platform aliases and parser support were not validated for the new operating system.
  2. Connection and command execution lack bounded timeouts and failure classification.
  3. The CLI testbed uses a broadly privileged shared credential.
  4. The job records post-change output but did not capture a comparable prechange snapshot.

Explanation

Correct Answer

A:

This mechanism explains the reported observation, the same pyATS check passes in development but fails on a second device platform. The targeted response is to use platform-appropriate testbed definitions and supported parsers per device family; the expected confirming result is that equivalent route-state tests pass on each qualified device platform.

Incorrect Answers

B:

That mechanism fits a different symptom: a maintenance-run pyATS job becomes stuck when a device is unreachable. The reported condition instead points to platform aliases and parser support were not validated for the new operating system.

C:

That mechanism fits a different symptom: a pyATS validation run uses an unrestricted admin account for simple show commands. The reported condition instead points to platform aliases and parser support were not validated for the new operating system.

D:

That mechanism fits a different symptom: a pyATS post-change check cannot determine whether the OSPF neighbor state regressed. The reported condition instead points to platform aliases and parser support were not validated for the new operating system.

Question 868

A smart-factory integrator is working on industrial VLAN and OSPF reconfiguration. A retrospective identifies: the same pyATS check passes in development but fails on a second device platform. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that required checks pass with limited permissions and no elevated credential exposure; flag recurrence if a pyATS validation run uses an unrestricted admin account for simple show commands.
  2. Check that the diff identifies only intended OSPF adjacency changes; flag recurrence if a pyATS post-change check cannot determine whether the OSPF neighbor state regressed.
  3. Check that an isolated offline node causes a bounded, diagnosable failure rather than an endless run; flag recurrence if a maintenance-run pyATS job becomes stuck when a device is unreachable.
  4. Check that equivalent route-state tests pass on each qualified device platform; flag recurrence if the same pyATS check passes in development but fails on a second device platform.

Explanation

Correct Answer

D:

The check tests the restored condition, equivalent route-state tests pass on each qualified device platform, and explicitly flags a recurrence of the same pyATS check passes in development but fails on a second device platform.

Incorrect Answers

A:

This guard monitors a different regression trigger: a pyATS validation run uses an unrestricted admin account for simple show commands. It does not directly validate the recovery condition, equivalent route-state tests pass on each qualified device platform.

B:

This guard monitors a different regression trigger: a pyATS post-change check cannot determine whether the OSPF neighbor state regressed. It does not directly validate the recovery condition, equivalent route-state tests pass on each qualified device platform.

C:

This guard monitors a different regression trigger: a maintenance-run pyATS job becomes stuck when a device is unreachable. It does not directly validate the recovery condition, equivalent route-state tests pass on each qualified device platform.

Question 869

A global software delivery group is working on network automation workflows across release environments. During deployment, a post-deploy pyATS job runs before routing protocols finish converging. Which action most directly addresses this specific network automation problem?

  1. Supply a validated environment-specific testbed file with approved device identities.
  2. Compare only required route invariants and exclude or bound volatile counters.
  3. Make failed pyATS assertions propagate to the CI stage result.
  4. Poll the targeted neighbor state with a deadline and meaningful failure evidence.

Explanation

Correct Answer

D:

The observed failure is: a post-deploy pyATS job runs before routing protocols finish converging. The underlying cause is: the check has no bounded convergence polling window. Verify that expected adjacency reaches the accepted state before the deadline.

Incorrect Answers

A:

This would address a different condition: a pyATS check accidentally collects interface data from a lab emulator instead of production. Here, the actual issue is: the check has no bounded convergence polling window; it needs a scoped correction rather than this unrelated intervention.

B:

This would address a different condition: pyATS can parse route summaries but compares changing counters as if they were stable config. Here, the actual issue is: the check has no bounded convergence polling window; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a CLI validation job exits successfully despite failing one required ACL assertion. Here, the actual issue is: the check has no bounded convergence polling window; it needs a scoped correction rather than this unrelated intervention.

Question 870

A global software delivery group is working on network automation workflows across release environments. The team found that a post-deploy pyATS job runs before routing protocols finish converging. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Expected adjacency reaches the accepted state before the deadline.
  2. CLI validation connects to the intended approved production device set.
  3. Invalid ACL test fails the job and blocks deployment promotion.
  4. Replayed normal traffic variation does not produce false configuration-regression alarms.

Explanation

Correct Answer

A:

This evidence directly verifies the scoped correction, poll the targeted neighbor state with a deadline and meaningful failure evidence, for the underlying issue: the check has no bounded convergence polling window. It should be checked against actual device or pipeline output.

Incorrect Answers

B:

This would confirm recovery from a pyATS check accidentally collects interface data from a lab emulator instead of production, not necessarily from the reported incident. For the specified issue the relevant confirmation is: expected adjacency reaches the accepted state before the deadline.

C:

This would confirm recovery from a CLI validation job exits successfully despite failing one required ACL assertion, not necessarily from the reported incident. For the specified issue the relevant confirmation is: expected adjacency reaches the accepted state before the deadline.

D:

This would confirm recovery from pyATS can parse route summaries but compares changing counters as if they were stable config, not necessarily from the reported incident. For the specified issue the relevant confirmation is: expected adjacency reaches the accepted state before the deadline.