McAfee-Secured Website

Exam Bundle

Exam Code: 350-901

Exam Name Designing, Deploying, and Managing Network Automation Systems

Certification Provider: Cisco

Corresponding Certification: DevNet Professional

Cisco 350-901 Bundle $25.00

100% Cisco 350-901 Guaranteed Success With Testking Training Materials

Get Real 350-901 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-901 Questions & Answers

    604 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-901 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-901 Video Course

    350-901 Video Course

    106 Video Lectures

    350-901 Video Course is developed by Cisco Professionals to help you pass the 350-901 exam.

    Description

    This course will improve your knowledge and skills required to pass Designing, Deploying, and Managing Network Automation Systems exam.

Designing, Deploying, and Managing Network Automation Systems (350-901) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    604 Questions

    $124.99
  • 350-901 Video Course

    Video Course

    106 Video Lectures

    $39.99

Cisco 350-901 Practice Test 50

Question 490

A government service-delivery team is working on segmented infrastructure spanning two departments. The team found that an approved rollback procedure is documented but no pipeline stage can invoke it. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Pipeline marks success only after the network reaches specified desired state.
  2. Production deploy uses only checksummed artifacts from the approved build stage.
  3. Unapproved pipeline runs stop before issuing device write operations.
  4. A simulated failed postcheck restores a known good config under audit.

Explanation

Correct Answer

D:

This evidence directly verifies the scoped correction, implement a tested rollback job guarded by deployment identity and safety checks, for the underlying issue: incident recovery depends on manual edits after automated deploy failure. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from the post-validation stage checks only whether the CLI command exited without error, not necessarily from the reported incident. For the specified issue the relevant confirmation is: a simulated failed postcheck restores a known good config under audit.

B:

This would confirm recovery from a GitLab pipeline downloads untrusted dependencies during a production release job, not necessarily from the reported incident. For the specified issue the relevant confirmation is: a simulated failed postcheck restores a known good config under audit.

C:

This would confirm recovery from a pipeline enters deploy when the intended manual approval gate has not been passed, not necessarily from the reported incident. For the specified issue the relevant confirmation is: a simulated failed postcheck restores a known good config under audit.

Question 491

A government service-delivery team is working on segmented infrastructure spanning two departments. The team observes that an approved rollback procedure is documented but no pipeline stage can invoke it. Which underlying mechanism best explains this failure?

  1. No independent network-state acceptance checks run after the change.
  2. Incident recovery depends on manual edits after automated deploy failure.
  3. Build provenance and dependency versions are not locked before execution.
  4. The production deployment job is not protected or configured as a manual gate.

Explanation

Correct Answer

B:

This mechanism explains the reported observation, an approved rollback procedure is documented but no pipeline stage can invoke it. The targeted response is to implement a tested rollback job guarded by deployment identity and safety checks; the expected confirming result is that a simulated failed postcheck restores a known good config under audit.

Incorrect Answers

A:

That mechanism fits a different symptom: the post-validation stage checks only whether the CLI command exited without error. The reported condition instead points to incident recovery depends on manual edits after automated deploy failure.

C:

That mechanism fits a different symptom: a GitLab pipeline downloads untrusted dependencies during a production release job. The reported condition instead points to incident recovery depends on manual edits after automated deploy failure.

D:

That mechanism fits a different symptom: a pipeline enters deploy when the intended manual approval gate has not been passed. The reported condition instead points to incident recovery depends on manual edits after automated deploy failure.

Question 492

A government service-delivery team is working on segmented infrastructure spanning two departments. A retrospective identifies: an approved rollback procedure is documented but no pipeline stage can invoke it. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that pipeline marks success only after the network reaches specified desired state; flag recurrence if the post-validation stage checks only whether the CLI command exited without error.
  2. Check that unapproved pipeline runs stop before issuing device write operations; flag recurrence if a pipeline enters deploy when the intended manual approval gate has not been passed.
  3. Check that a simulated failed postcheck restores a known good config under audit; flag recurrence if an approved rollback procedure is documented but no pipeline stage can invoke it.
  4. Check that production deploy uses only checksummed artifacts from the approved build stage; flag recurrence if a GitLab pipeline downloads untrusted dependencies during a production release job.

Explanation

Correct Answer

C:

The check tests the restored condition, a simulated failed postcheck restores a known good config under audit, and explicitly flags a recurrence of an approved rollback procedure is documented but no pipeline stage can invoke it.

Incorrect Answers

A:

This guard monitors a different regression trigger: the post-validation stage checks only whether the CLI command exited without error. It does not directly validate the recovery condition, a simulated failed postcheck restores a known good config under audit.

B:

This guard monitors a different regression trigger: a pipeline enters deploy when the intended manual approval gate has not been passed. It does not directly validate the recovery condition, a simulated failed postcheck restores a known good config under audit.

D:

This guard monitors a different regression trigger: a GitLab pipeline downloads untrusted dependencies during a production release job. It does not directly validate the recovery condition, a simulated failed postcheck restores a known good config under audit.

Question 493

A transportation fleet operator is working on telemetry and event-based network diagnostics. During deployment, tests pass on code changes that do not include newly added YANG fixtures. Which action most directly addresses this specific network automation problem?

  1. Run schema compilation and integration checks against the pinned model in prevalidation.
  2. Make deploy depend on successful required policy and simulation checks.
  3. Scope credentials to protected environments/ref gates with least privilege.
  4. Place validated prevalidation as a required blocking dependency before deploy.

Explanation

Correct Answer

A:

The observed failure is: tests pass on code changes that do not include newly added YANG fixtures. The underlying cause is: build/prevalidation misses required schema and fixture validation. Verify that invalid YANG fixture changes block deployment in CI.

Incorrect Answers

B:

This would address a different condition: a network change pipeline enters the deploy stage even after prevalidation reports an unsafe ACL scope. Here, the actual issue is: build/prevalidation misses required schema and fixture validation; it needs a scoped correction rather than this unrelated intervention.

C:

This would address a different condition: a new GitLab pipeline exposes production controller credentials to arbitrary feature branches. Here, the actual issue is: build/prevalidation misses required schema and fixture validation; it needs a scoped correction rather than this unrelated intervention.

D:

This would address a different condition: CI deploy job can run even when the prevalidation suite reports failing ACL checks. Here, the actual issue is: build/prevalidation misses required schema and fixture validation; it needs a scoped correction rather than this unrelated intervention.

Question 494

A transportation fleet operator is working on telemetry and event-based network diagnostics. The team found that tests pass on code changes that do not include newly added YANG fixtures. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Intentionally failed ACL tests prevent all device changes.
  2. A test fork cannot access secrets or trigger protected environment changes.
  3. Invalid YANG fixture changes block deployment in CI.
  4. The unsafe candidate is blocked before any network modification.

Explanation

Correct Answer

C:

This evidence directly verifies the scoped correction, run schema compilation and integration checks against the pinned model in prevalidation, for the underlying issue: build/prevalidation misses required schema and fixture validation. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from CI deploy job can run even when the prevalidation suite reports failing ACL checks, not necessarily from the reported incident. For the specified issue the relevant confirmation is: invalid YANG fixture changes block deployment in CI.

B:

This would confirm recovery from a new GitLab pipeline exposes production controller credentials to arbitrary feature branches, not necessarily from the reported incident. For the specified issue the relevant confirmation is: invalid YANG fixture changes block deployment in CI.

D:

This would confirm recovery from a network change pipeline enters the deploy stage even after prevalidation reports an unsafe ACL scope, not necessarily from the reported incident. For the specified issue the relevant confirmation is: invalid YANG fixture changes block deployment in CI.

Question 495

A transportation fleet operator is working on telemetry and event-based network diagnostics. The team observes that tests pass on code changes that do not include newly added YANG fixtures. Which underlying mechanism best explains this failure?

  1. Stage dependencies permit deployment after an unsuccessful test.
  2. Build/prevalidation misses required schema and fixture validation.
  3. Gate conditions allow deployment despite a failed policy evaluation.
  4. Protected deployment secrets are accessible outside authorized branches.

Explanation

Correct Answer

B:

This mechanism explains the reported observation, tests pass on code changes that do not include newly added YANG fixtures. The targeted response is to run schema compilation and integration checks against the pinned model in prevalidation; the expected confirming result is that invalid YANG fixture changes block deployment in CI.

Incorrect Answers

A:

That mechanism fits a different symptom: CI deploy job can run even when the prevalidation suite reports failing ACL checks. The reported condition instead points to build/prevalidation misses required schema and fixture validation.

C:

That mechanism fits a different symptom: a network change pipeline enters the deploy stage even after prevalidation reports an unsafe ACL scope. The reported condition instead points to build/prevalidation misses required schema and fixture validation.

D:

That mechanism fits a different symptom: a new GitLab pipeline exposes production controller credentials to arbitrary feature branches. The reported condition instead points to build/prevalidation misses required schema and fixture validation.

Question 496

A transportation fleet operator is working on telemetry and event-based network diagnostics. A retrospective identifies: tests pass on code changes that do not include newly added YANG fixtures. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that a test fork cannot access secrets or trigger protected environment changes; flag recurrence if a new GitLab pipeline exposes production controller credentials to arbitrary feature branches.
  2. Check that the unsafe candidate is blocked before any network modification; flag recurrence if a network change pipeline enters the deploy stage even after prevalidation reports an unsafe ACL scope.
  3. Check that intentionally failed ACL tests prevent all device changes; flag recurrence if CI deploy job can run even when the prevalidation suite reports failing ACL checks.
  4. Check that invalid YANG fixture changes block deployment in CI; flag recurrence if tests pass on code changes that do not include newly added YANG fixtures.

Explanation

Correct Answer

D:

The check tests the restored condition, invalid YANG fixture changes block deployment in CI, and explicitly flags a recurrence of tests pass on code changes that do not include newly added YANG fixtures.

Incorrect Answers

A:

This guard monitors a different regression trigger: a new GitLab pipeline exposes production controller credentials to arbitrary feature branches. It does not directly validate the recovery condition, invalid YANG fixture changes block deployment in CI.

B:

This guard monitors a different regression trigger: a network change pipeline enters the deploy stage even after prevalidation reports an unsafe ACL scope. It does not directly validate the recovery condition, invalid YANG fixture changes block deployment in CI.

C:

This guard monitors a different regression trigger: CI deploy job can run even when the prevalidation suite reports failing ACL checks. It does not directly validate the recovery condition, invalid YANG fixture changes block deployment in CI.

Question 497

A multi-region SaaS operator is working on versioned configuration pipelines and quality gates. During deployment, a job delivers a network change without retaining run logs or reviewers. Which action most directly addresses this specific network automation problem?

  1. Add postchange pyATS or equivalent assertions and controlled rollback triggers.
  2. Promote the exact immutable built artifact through prevalidation and deploy.
  3. Record commit, reviewer, plan hash, device scope and outcome as restricted artifacts.
  4. Use staged canary deployments with health gates before widening the batch.

Explanation

Correct Answer

C:

The observed failure is: a job delivers a network change without retaining run logs or reviewers. The underlying cause is: the pipeline omits provenance and auditable artifact retention. Verify that an auditor can reconstruct the approved change and validation sequence.

Incorrect Answers

A:

This would address a different condition: a CI pipeline deploys to production but never compares live routing state to the prechange baseline. Here, the actual issue is: the pipeline omits provenance and auditable artifact retention; it needs a scoped correction rather than this unrelated intervention.

B:

This would address a different condition: the deploy stage uses a different unreviewed generated config from the one tested in CI. Here, the actual issue is: the pipeline omits provenance and auditable artifact retention; it needs a scoped correction rather than this unrelated intervention.

D:

This would address a different condition: a network rollout modifies every site simultaneously without recovery checkpoints. Here, the actual issue is: the pipeline omits provenance and auditable artifact retention; it needs a scoped correction rather than this unrelated intervention.

Question 498

A multi-region SaaS operator is working on versioned configuration pipelines and quality gates. The team found that a job delivers a network change without retaining run logs or reviewers. After remediation, which observation is the strongest evidence that this particular fault is resolved?

  1. Deployed file checksum matches the previously approved artifact checksum.
  2. An auditor can reconstruct the approved change and validation sequence.
  3. A failing canary stops subsequent sites before impact expands.
  4. Route adjacency and service-path acceptance tests run after every deployment.

Explanation

Correct Answer

B:

This evidence directly verifies the scoped correction, record commit, reviewer, plan hash, device scope and outcome as restricted artifacts, for the underlying issue: the pipeline omits provenance and auditable artifact retention. It should be checked against actual device or pipeline output.

Incorrect Answers

A:

This would confirm recovery from the deploy stage uses a different unreviewed generated config from the one tested in CI, not necessarily from the reported incident. For the specified issue the relevant confirmation is: an auditor can reconstruct the approved change and validation sequence.

C:

This would confirm recovery from a network rollout modifies every site simultaneously without recovery checkpoints, not necessarily from the reported incident. For the specified issue the relevant confirmation is: an auditor can reconstruct the approved change and validation sequence.

D:

This would confirm recovery from a CI pipeline deploys to production but never compares live routing state to the prechange baseline, not necessarily from the reported incident. For the specified issue the relevant confirmation is: an auditor can reconstruct the approved change and validation sequence.

Question 499

A multi-region SaaS operator is working on versioned configuration pipelines and quality gates. The team observes that a job delivers a network change without retaining run logs or reviewers. Which underlying mechanism best explains this failure?

  1. The pipeline omits provenance and auditable artifact retention.
  2. Deployment lacks batching and early failure stop conditions.
  3. Build artifacts are regenerated between validation and deployment.
  4. The postvalidation stage is missing objective network checks.

Explanation

Correct Answer

A:

This mechanism explains the reported observation, a job delivers a network change without retaining run logs or reviewers. The targeted response is to record commit, reviewer, plan hash, device scope and outcome as restricted artifacts; the expected confirming result is that an auditor can reconstruct the approved change and validation sequence.

Incorrect Answers

B:

That mechanism fits a different symptom: a network rollout modifies every site simultaneously without recovery checkpoints. The reported condition instead points to the pipeline omits provenance and auditable artifact retention.

C:

That mechanism fits a different symptom: the deploy stage uses a different unreviewed generated config from the one tested in CI. The reported condition instead points to the pipeline omits provenance and auditable artifact retention.

D:

That mechanism fits a different symptom: a CI pipeline deploys to production but never compares live routing state to the prechange baseline. The reported condition instead points to the pipeline omits provenance and auditable artifact retention.

Question 500

A multi-region SaaS operator is working on versioned configuration pipelines and quality gates. A retrospective identifies: a job delivers a network change without retaining run logs or reviewers. Which ongoing regression check best detects recurrence of this precise failure?

  1. Check that a failing canary stops subsequent sites before impact expands; flag recurrence if a network rollout modifies every site simultaneously without recovery checkpoints.
  2. Check that route adjacency and service-path acceptance tests run after every deployment; flag recurrence if a CI pipeline deploys to production but never compares live routing state to the prechange baseline.
  3. Check that deployed file checksum matches the previously approved artifact checksum; flag recurrence if the deploy stage uses a different unreviewed generated config from the one tested in CI.
  4. Check that an auditor can reconstruct the approved change and validation sequence; flag recurrence if a job delivers a network change without retaining run logs or reviewers.

Explanation

Correct Answer

D:

The check tests the restored condition, an auditor can reconstruct the approved change and validation sequence, and explicitly flags a recurrence of a job delivers a network change without retaining run logs or reviewers.

Incorrect Answers

A:

This guard monitors a different regression trigger: a network rollout modifies every site simultaneously without recovery checkpoints. It does not directly validate the recovery condition, an auditor can reconstruct the approved change and validation sequence.

B:

This guard monitors a different regression trigger: a CI pipeline deploys to production but never compares live routing state to the prechange baseline. It does not directly validate the recovery condition, an auditor can reconstruct the approved change and validation sequence.

C:

This guard monitors a different regression trigger: the deploy stage uses a different unreviewed generated config from the one tested in CI. It does not directly validate the recovery condition, an auditor can reconstruct the approved change and validation sequence.