McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 90

Question 890

A small training network uses one shared approved passphrase and AES/CCMP over the air. What WPA security family should the engineer recognize?

  1. Legacy WPA/TKIP security
  2. Open Wi-Fi without link-layer encryption
  3. WPA2/WPA3-Enterprise with 802.1X and a RADIUS authentication backend
  4. WPA2-Personal using AES/CCMP

Explanation

Correct Answer

D:

WPA2 Personal with CCMP uses the preshared-key model.

Incorrect Answers

A:

Legacy WPA/TKIP has known limitations and is not the preferred modern Wi-Fi security setting.

B:

An open WLAN has no normal WPA2/WPA3 link-layer authentication/encryption protection.

C:

Enterprise Wi-Fi uses individual user/device identity authentication, commonly via 802.1X and RADIUS.

Question 891

An office replaces a WPA2 PSK SSID with a supported password-based WPA3 deployment. What authentication mode supports this upgrade?

  1. Open Wi-Fi without link-layer encryption
  2. Legacy WPA/TKIP security
  3. WPA2-Personal using AES/CCMP
  4. WPA3-Personal using SAE

Explanation

Correct Answer

D:

WPA3 Personal introduces SAE for password-authenticated association.

Incorrect Answers

A:

An open WLAN has no normal WPA2/WPA3 link-layer authentication/encryption protection.

B:

Legacy WPA/TKIP has known limitations and is not the preferred modern Wi-Fi security setting.

C:

WPA2 with AES/CCMP is a common Wi-Fi personal security mode based on a preshared key.

Question 892

A new branch WLAN called Staff-Corp was created in a WLC GUI but is not broadcasting because its WLAN profile was never enabled. What basic GUI setting is needed?

  1. Assign the WLAN to the intended client VLAN
  2. Create and enable the intended WLAN SSID in the controller GUI
  3. Select AES/CCMP rather than legacy TKIP
  4. Keep the WPA2 guest SSID mapped to a separate approved guest VLAN

Explanation

Correct Answer

B:

The correct WLAN profile and enabled SSID must be configured before clients can join.

Incorrect Answers

A:

The WLAN interface mapping controls the wired VLAN into which client traffic is bridged.

C:

WPA2 AES/CCMP is the expected strong data encryption mode for modern WPA2 PSK.

D:

Guest VLAN segmentation protects internal networks from guest access even when WPA2 PSK is used.

Question 893

A controller administrator must configure a WPA2-Personal WLAN for a small office with one approved shared credential. What key security setting is required?

  1. Validate client association and WPA2 handshake using appropriate controller and client status
  2. Assign the WLAN to the target AP group or radio policy
  3. Select WPA2-Personal/PSK with an approved strong passphrase
  4. Keep the WPA2 guest SSID mapped to a separate approved guest VLAN

Explanation

Correct Answer

C:

WPA2 PSK requires an approved preshared key on the WLAN and clients.

Incorrect Answers

A:

Association state and authentication failure details help verify the actual client security exchange.

B:

The WLAN must be bound to the correct APs/radio scope for clients to discover it.

D:

Guest VLAN segmentation protects internal networks from guest access even when WPA2 PSK is used.

Question 894

The controller Wi-Fi profile allows legacy TKIP, but company policy requires WPA2 AES/CCMP encryption. Which GUI option must be selected?

  1. Select AES/CCMP rather than legacy TKIP
  2. Create and enable the intended WLAN SSID in the controller GUI
  3. Assign the WLAN to the target AP group or radio policy
  4. Ensure the WLAN administrative status is enabled

Explanation

Correct Answer

A:

AES/CCMP supplies the requested WPA2 data-protection mode.

Incorrect Answers

B:

The WLAN profile must exist and be enabled to advertise the intended SSID.

C:

The WLAN must be bound to the correct APs/radio scope for clients to discover it.

D:

An administratively disabled WLAN cannot be served to clients despite correct security configuration.

Question 895

Authenticated WLAN clients receive IP addresses from an internal finance subnet instead of the approved staff VLAN. Which GUI mapping should be corrected?

  1. Select WPA2-Personal/PSK with an approved strong passphrase
  2. Validate client association and WPA2 handshake using appropriate controller and client status
  3. Select AES/CCMP rather than legacy TKIP
  4. Assign the WLAN to the intended client VLAN

Explanation

Correct Answer

D:

Client VLAN assignments are controlled by WLAN interface/VLAN mapping.

Incorrect Answers

A:

WPA2 PSK uses one properly configured preshared key for compatible clients.

B:

Association state and authentication failure details help verify the actual client security exchange.

C:

WPA2 AES/CCMP is the expected strong data encryption mode for modern WPA2 PSK.

Question 896

The new WPA2 SSID appears on the headquarters APs but never on the intended branch AP group. Which controller placement setting should be checked?

  1. Select AES/CCMP rather than legacy TKIP
  2. Keep the WPA2 guest SSID mapped to a separate approved guest VLAN
  3. Select WPA2-Personal/PSK with an approved strong passphrase
  4. Assign the WLAN to the target AP group or radio policy

Explanation

Correct Answer

D:

The WLAN radio/AP-group mapping determines where that SSID is served.

Incorrect Answers

A:

WPA2 AES/CCMP is the expected strong data encryption mode for modern WPA2 PSK.

B:

Guest VLAN segmentation protects internal networks from guest access even when WPA2 PSK is used.

C:

WPA2 PSK uses one properly configured preshared key for compatible clients.

Question 897

A WPA2 profile has the correct passphrase and client VLAN but clients cannot see it because WLAN status reads Disabled. What must change?

  1. Select WPA2-Personal/PSK with an approved strong passphrase
  2. Ensure the WLAN administrative status is enabled
  3. Select AES/CCMP rather than legacy TKIP
  4. Assign the WLAN to the intended client VLAN

Explanation

Correct Answer

B:

Administratively enabling the WLAN makes the configured profile available on assigned AP radios.

Incorrect Answers

A:

WPA2 PSK uses one properly configured preshared key for compatible clients.

C:

WPA2 AES/CCMP is the expected strong data encryption mode for modern WPA2 PSK.

D:

The WLAN interface mapping controls the wired VLAN into which client traffic is bridged.

Question 898

A network administrator changed the WPA2 PSK in a WLC GUI but devices still authenticate with the former policy because the change was not committed. Which workflow action is missing?

  1. Create and enable the intended WLAN SSID in the controller GUI
  2. Keep the WPA2 guest SSID mapped to a separate approved guest VLAN
  3. Apply/commit the WLAN GUI configuration to its intended controller or AP targets
  4. Validate client association and WPA2 handshake using appropriate controller and client status

Explanation

Correct Answer

C:

The controller needs the new WLAN security configuration to be applied to the managed system.

Incorrect Answers

A:

The WLAN profile must exist and be enabled to advertise the intended SSID.

B:

Guest VLAN segmentation protects internal networks from guest access even when WPA2 PSK is used.

D:

Association state and authentication failure details help verify the actual client security exchange.

Question 899

Clients report repeated WPA2 handshake failures after a passphrase update. Which operational verification helps distinguish authentication from DHCP problems?

  1. Create and enable the intended WLAN SSID in the controller GUI
  2. Assign the WLAN to the target AP group or radio policy
  3. Assign the WLAN to the intended client VLAN
  4. Validate client association and WPA2 handshake using appropriate controller and client status

Explanation

Correct Answer

D:

Controller and client association/handshake status can isolate WPA2 failure before IP assignment.

Incorrect Answers

A:

The WLAN profile must exist and be enabled to advertise the intended SSID.

B:

The WLAN must be bound to the correct APs/radio scope for clients to discover it.

C:

The WLAN interface mapping controls the wired VLAN into which client traffic is bridged.

Question 900

A guest WLAN uses WPA2 PSK for over-the-air protection but guests must never occupy the internal employee broadcast domain. What controller mapping protects separation?

  1. Keep the WPA2 guest SSID mapped to a separate approved guest VLAN
  2. Ensure the WLAN administrative status is enabled
  3. Select WPA2-Personal/PSK with an approved strong passphrase
  4. Validate client association and WPA2 handshake using appropriate controller and client status

Explanation

Correct Answer

A:

Separate VLAN mapping is needed to isolate guest client traffic from staff networks.

Incorrect Answers

B:

An administratively disabled WLAN cannot be served to clients despite correct security configuration.

C:

WPA2 PSK uses one properly configured preshared key for compatible clients.

D:

Association state and authentication failure details help verify the actual client security exchange.