McAfee-Secured Website

Exam Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Video Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Video Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 71

Question 700

An NMS receives a syslog record with severity 1 and must classify it for immediate action. Which severity class is this?

  1. Severity 7 — Debugging
  2. Severity 1 — Alert
  3. Severity 2 — Critical
  4. Severity 5 — Notice

Explanation

Correct Answer

B:

Severity 1 corresponds to Alert. Lower syslog severity numbers indicate more urgent conditions, with severity 0 Emergency and 1 Alert.

Incorrect Answers

A:

Severity 7 is detailed debugging output.

C:

Severity 2 denotes a critical condition.

D:

Severity 5 is a normal but significant condition.

Question 701

A storage-failure notification is marked syslog priority severity 2. Which severity label should the SIEM assign?

  1. Severity 5 — Notice
  2. Severity 1 — Alert
  3. Severity 2 — Critical
  4. Severity 4 — Warning

Explanation

Correct Answer

C:

Severity 2 is Critical. The syslog 0–7 scale places Critical at level 2, immediately below Alert.

Incorrect Answers

A:

Severity 5 is a normal but significant condition.

B:

Severity 1 indicates immediate action is needed.

D:

Severity 4 describes a warning condition.

Question 702

An IOS syslog message is reported at severity 3 after a command error. Which conventional label matches?

  1. Severity 7 — Debugging
  2. Severity 0 — Emergency
  3. Severity 6 — Informational
  4. Severity 3 — Error

Explanation

Correct Answer

D:

Syslog severity 3 is Error. Syslog level 3 is the Error class, which is more urgent than Warning at level 4.

Incorrect Answers

A:

Severity 7 is detailed debugging output.

B:

Syslog severity 0 is the most urgent emergency condition.

C:

Severity 6 conveys ordinary informational events.

Question 703

A thermal threshold warning is assigned severity 4 in device logs. What class is that?

  1. Severity 2 — Critical
  2. Severity 4 — Warning
  3. Severity 5 — Notice
  4. Severity 3 — Error

Explanation

Correct Answer

B:

Severity 4 corresponds to Warning. In the standard syslog scale, Warning is level 4 and Notice follows at level 5.

Incorrect Answers

A:

Severity 2 denotes a critical condition.

C:

Severity 5 is a normal but significant condition.

D:

Severity 3 is an error-level syslog message.

Question 704

A normal but significant configuration event is marked severity 5. What is its syslog level name?

  1. Severity 4 — Warning
  2. Severity 6 — Informational
  3. Severity 7 — Debugging
  4. Severity 5 — Notice

Explanation

Correct Answer

D:

Severity 5 denotes Notice. Notice is level 5, between Warning level 4 and Informational level 6.

Incorrect Answers

A:

Severity 4 describes a warning condition.

B:

Severity 6 conveys ordinary informational events.

C:

Severity 7 is detailed debugging output.

Question 705

A healthy interface transition log is emitted at syslog severity 6. Which label applies?

  1. Severity 3 — Error
  2. Severity 6 — Informational
  3. Severity 5 — Notice
  4. Severity 7 — Debugging

Explanation

Correct Answer

B:

Severity 6 is Informational. Informational is severity 6, with Debugging at the less urgent level 7.

Incorrect Answers

A:

Severity 3 is an error-level syslog message.

C:

Severity 5 is a normal but significant condition.

D:

Severity 7 is detailed debugging output.

Question 706

Clients on subnet 10.2.30.0/24 at a warehouse distribution floor broadcast DHCPDISCOVER; the DHCP server is in another subnet at 192.0.2.10. What IOS configuration relays client DHCP traffic?

  1. interface Vlan10; ip nat inside
  2. interface Vlan10; ip helper-address 192.0.2.10
  3. interface Vlan10; ip address 192.0.2.10 255.255.255.0
  4. interface Vlan10; no ip routing

Explanation

Correct Answer

B:

On the client-facing routed interface, ip helper-address forwards DHCPv4 broadcast requests toward the remote DHCP server.

Incorrect Answers

A:

NAT interface marking is not DHCP relay.

C:

Assigning the remote server IP to a local SVI creates a duplicate addressing problem and does not relay client broadcasts.

D:

Disabling routing cannot establish the required routed relay path.

Question 707

At an enterprise data center, an IOS branch WAN interface is connected to an ISP that assigns its public IPv4 address dynamically. What interface command enables DHCP client operation?

  1. Use ip helper-address as the router own WAN DHCP client command
  2. Use ip nat inside and omit IPv4 address acquisition
  3. Configure the IOS WAN interface as a DHCP client with ip address dhcp
  4. Configure a fixed static IP address without the ISP lease information

Explanation

Correct Answer

C:

The ip address dhcp interface statement requests an IPv4 lease for the router interface itself.

Incorrect Answers

A:

A helper address relays client requests, not configure the router interface as a DHCP client.

B:

NAT marking does not acquire an interface IPv4 address.

D:

A static address does not dynamically obtain the ISP-assigned parameters.

Question 708

An ip helper-address to 192.0.2.44 exists on Vlan12, but clients at a disaster-recovery location still have no leases. The router has no path to the server. What network prerequisite must be fixed?

  1. Ensure the relay interface has the correct client subnet and a reachable DHCP server path
  2. Place the remote DHCP server IP as the client default gateway on all PCs
  3. Disable routing on the gateway while retaining the remote helper address
  4. Assume L2 broadcasts naturally traverse routed interfaces without a helper

Explanation

Correct Answer

A:

The DHCP relay must receive local client broadcasts and unicast forwarded requests to a server reachable by IP.

Incorrect Answers

B:

A DHCP server address is not the Layer 3 next-hop gateway for user traffic.

C:

Disabling routing breaks reachability to a server beyond the local subnet.

D:

Routers normally do not forward local Ethernet DHCP broadcasts without explicit relay.

Question 709

Only hosts in VLAN 13 at a regional healthcare office fail to get DHCP, while neighboring VLANs work. Which specific gateway interface setting should be inspected first?

  1. Change the workstation subnet mask only and assume the DHCP broadcast will route
  2. Verify the client VLAN gateway interface and its DHCP relay destination address
  3. Configure only an OSPF router ID to enable DHCP relay
  4. Replace the DHCP server with DNS A records and remove DHCP service

Explanation

Correct Answer

B:

DHCPv4 relay needs correct client-facing SVI and a helper pointing to the intended reachable server.

Incorrect Answers

A:

Host subnet mask does not cause routers to forward broadcast DHCP requests.

C:

OSPF router ID does not automatically configure DHCP relay.

D:

DNS mapping cannot provide DHCP address leases and client options.

Question 710

A workstation received a valid DHCP address, subnet mask and default gateway, and can ping its gateway but cannot resolve any names. Which DHCP-provided parameter should be inspected first?

  1. The EtherChannel group number of the server
  2. The assigned DNS server address in the lease options
  3. The OSPF router ID of the core router
  4. The switch native VLAN for an unrelated trunk

Explanation

Correct Answer

B:

Addressing and local routing work, but the resolver option can still be wrong or unreachable.

Incorrect Answers

A:

Link aggregation identifier does not tell clients which resolver to query.

C:

A router ID is not a DNS resolver configuration value.

D:

A valid address and working gateway do not point first to an unrelated trunk.