McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 36

Question 350

After admitting a new ElasticXL member, the operator notices package cloning has stalled. Other members are forwarding normally. A proposed change would be to inspect the $FWDIR/log/blade_config state messages, which addresses the different requirement to diagnose cluster member state transitions. Which action instead addresses the observed incident?

  1. Inspect /var/log/lightshot.log on the relevant member
  2. Allow the automatic image/configuration clone from SMO
  3. Use insights or show cluster info provision live
  4. Inspect the $FWDIR/log/blade_config state messages

Explanation

Correct Answer

A:

The lightshot log documents SMO snapshot and image cloning. This directly addresses the documented incident evidence.

Incorrect Answers

B:

ElasticXL copies the SMO image and settings to added members, yet that applies to distribute the first member software to newly joined nodes rather than the observed issue.

C:

ElasticXL provides member onboarding and clone status commands; this does not resolve the observed condition.

D:

blade_config records important cluster up/down messages, but the current evidence calls for a different R82 operation.

Question 351

During an R82 management HA installation review, both peers have different internal IP addresses, and a technician calls the higher-address peer the primary. The deployment record shows which management server was installed first. The controls that address the separate requirement to resolve two active nodes safely during collision troubleshooting are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use the Active Management Server for write operations
  2. Select which node remains Active before resetting its peer
  3. Treat the first installed management server as the primary
  4. Leave the newly defined secondary Management Server in Standby

Explanation

Correct Answer

C:

Installation sequence defines primary versus secondary roles. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Only the Active server accepts normal management changes; this does not resolve the observed condition.

B:

Collision recovery should establish an authoritative Active node, but the current evidence calls for a different R82 operation.

D:

Secondary management servers start in Standby by default, yet that applies to assign the default role to newly installed secondary management rather than the observed issue.

Question 352

A published web service is reachable at the correct translated public address, but inbound requests to TCP 8443 must arrive at an internal listener on TCP 443. The existing Manual NAT rule correctly matches the original source and destination addresses. A proposed change would be to create an appropriate one-direction Manual NAT policy rule, which addresses the different requirement to translate an address only in a specific traffic direction. Which action instead addresses the observed incident?

  1. Create an appropriate one-direction Manual NAT policy rule
  2. Place the intended matching rule first in the NAT rule order
  3. Create a Manual NAT rule with both translated fields
  4. Use the Translated Services column in a Manual NAT rule

Explanation

Correct Answer

D:

Manual NAT can translate services as well as addresses. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Manual NAT supports direction-specific static translation, but the current evidence calls for a different R82 operation.

B:

Only the first matching Manual NAT rule is enforced; this does not resolve the observed condition.

C:

Manual NAT allows simultaneous source and destination translation, yet that applies to translate the source and destination IP in one connection rather than the observed issue.

Question 353

Two external interfaces provide different VPN qualities and a service-specific policy must select a different link for latency-sensitive traffic than for bulk transfer. Static routing still works for the peer. An alternate diagnosis concerns the requirement to check the path when multiple VPN egress interfaces are available, for which a colleague suggests confirm chosen local interface and peer-advertised address. Based on the recorded symptoms, which corrective step should have priority?

  1. Confirm chosen local interface and peer-advertised address
  2. Configure the gateway Link Selection settings
  3. Configure VPN Load Sharing through Link Selection when supported
  4. Review Service Based Link Selection policies

Explanation

Correct Answer

D:

Service Based Link Selection addresses bandwidth usage by service. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Link Selection determines the address advertised and route used, but the current evidence calls for a different R82 operation.

B:

Link Selection controls VPN interface and address selection, yet that applies to choose the outgoing gateway address for VPN traffic rather than the observed issue.

C:

VPN Link Selection can share VPN traffic across available links; this does not resolve the observed condition.

Question 354

A manager asks to open Check Point’s existing graphical dashboards for recent intrusion and traffic trends, not an exportable PDF and not a custom new detection. The operator has access to SmartConsole Logs & Events. The operator must distinguish this from a separate requirement to create a custom graphic for log search results. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Build a customizable view in SmartView or Logs & Events
  2. Access SmartView on the appropriate server web endpoint
  3. Open Logs & Events and select Views
  4. Open Logs & Events and select Reports

Explanation

Correct Answer

C:

Views present monitored security information and visual queries. This directly addresses the documented incident evidence.

Incorrect Answers

A:

SmartView supports graphical views and log queries, but the current evidence calls for a different R82 operation.

B:

SmartView exposes views and reports through its web application; this does not resolve the observed condition.

D:

Reports summarize monitored activity for presentation, yet that applies to produce a saved security activity summary for management rather than the observed issue.

Question 355

For a scheduled branch refresh, twenty managed R82 gateways require a coordinated software upgrade. Central Deployment supports selecting a fleet but queues targets beyond the supported concurrent installation limit. Which deployment approach satisfies the batch requirement?

  1. Use supported Central Deployment parallel target selection
  2. Select Gateway & Server objects under Central Deployment
  3. Rely on policy-install concurrency settings to increase the number of simultaneous firmware upgrades
  4. Use Central Deployment Version Upgrade to Specific Major Version

Explanation

Correct Answer

A:

Central Deployment can process several supported targets. This directly addresses the documented incident evidence.

Incorrect Answers

B:

The deployment selection identifies actual upgrade targets; this does not resolve the observed condition.

C:

Rely on policy-install concurrency settings to increase the number of simultaneous firmware upgrades. Policy installation is a separate operation; the task requires software-package Central Deployment, not firewall-policy installation.

D:

Central Deployment offers target-version selection, yet that applies to move a gateway to a selected supported major version rather than the observed issue.

Question 356

A management database export archive was transferred from the source R82 server to a replacement host. The transfer tool completed without an error but the archive size differs slightly. Import has not started. The controls that address the separate requirement to move export archives between management servers safely are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Transfer the database export archive in binary mode
  2. Compare checksums of source and copied export files
  3. Back up the current management configuration first
  4. Export on the source and import on the destination

Explanation

Correct Answer

B:

Matching hashes detect transfer corruption before import. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Binary-mode transfer preserves compressed archive bytes, but the current evidence calls for a different R82 operation.

C:

The R82 migration procedure begins with source backups; this does not resolve the observed condition.

D:

Management migration preserves the database through export/import, yet that applies to move an R82 Management Server database to another R82 host rather than the observed issue.

Question 357

An R82 ElasticXL cluster has four physical appliances within one logical security gateway. A new engineer proposes creating four standalone SmartConsole gateway objects and installing unrelated policies to each. The controls that address the separate requirement to remove a member from an ElasticXL cluster are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Add supported members through ElasticXL admission and cloning
  2. Run Gaia First Time Configuration Wizard on the first appliance only
  3. Use Gaia Portal Cluster Management Actions > Delete
  4. Create one Single Management Object for the entire cluster

Explanation

Correct Answer

D:

ElasticXL exposes one logical Security Gateway management object. This directly addresses the documented incident evidence.

Incorrect Answers

A:

ElasticXL is designed to scale membership under one gateway object, yet that applies to scale out the cluster without changing the gateway identity rather than the observed issue.

B:

The first appliance establishes the configuration cloned to members; this does not resolve the observed condition.

C:

Cluster Management supports member removal, but the current evidence calls for a different R82 operation.

Question 358

A secondary R82 Management Server has just been added to a healthy deployment. Its database has not yet completed the initial HA synchronization and the primary remains active. The technician proposes activating both servers to speed provisioning. The controls that address the separate requirement to give analysts access to inspect policies on the standby node are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Open the Standby Management Server in read-only SmartConsole mode
  2. Leave the newly defined secondary Management Server in Standby
  3. Use Management HA actions to set one server to Standby
  4. Treat the first installed management server as the primary

Explanation

Correct Answer

B:

Secondary management servers start in Standby by default. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Standby permits inspection without competing configuration changes, but the current evidence calls for a different R82 operation.

C:

One Active server is required for a consistent normal HA state; this does not resolve the observed condition.

D:

Installation sequence defines primary versus secondary roles, yet that applies to identify the initial primary management server during installation rather than the observed issue.

Question 359

A published web service is reachable at the correct translated public address, but inbound requests to TCP 8443 must arrive at an internal listener on TCP 443. The existing Manual NAT rule correctly matches the original source and destination addresses. A proposed change would be to place the intended matching rule first in the NAT rule order, which addresses the different requirement to understand behavior when several Manual NAT rules could match. Which action instead addresses the observed incident?

  1. Use the Translated Services column in a Manual NAT rule
  2. Create a Manual NAT rule with both translated fields
  3. Place the intended matching rule first in the NAT rule order
  4. Create an appropriate one-direction Manual NAT policy rule

Explanation

Correct Answer

A:

Manual NAT can translate services as well as addresses. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Manual NAT allows simultaneous source and destination translation, yet that applies to translate the source and destination IP in one connection rather than the observed issue.

C:

Only the first matching Manual NAT rule is enforced, but the current evidence calls for a different R82 operation.

D:

Manual NAT supports direction-specific static translation; this does not resolve the observed condition.

Question 360

The partner IPsec log for an R82 site-to-site tunnel records NO_PROPOSAL_CHOSEN during IKE negotiation after its administrator removed an old encryption suite. Both endpoints can exchange UDP 500, and peer credentials have been checked. An alternate diagnosis concerns the requirement to handle IPv6 payloads under supported site-to-site VPN, for which a colleague suggests use the matching IPv6-in-IPv6 tunnel scheme and IKEv2. Based on the recorded symptoms, which corrective step should have priority?

  1. Use the matching IPv6-in-IPv6 tunnel scheme and IKEv2
  2. Verify phase-two traffic selectors and matching policy rules
  3. Compare phase settings, algorithms, and proposals on both peers
  4. Configure matching pre-shared keys on both VPN peers

Explanation

Correct Answer

C:

Both IKE/IPsec peers must agree on compatible proposals. This directly addresses the documented incident evidence.

Incorrect Answers

A:

R82 IPv6 VPN tunneling uses IPv6 within IPv6 and IKEv2, but the current evidence calls for a different R82 operation.

B:

Data associations still need matching selectors and permitted traffic; this does not resolve the observed condition.

D:

Both sides need consistent configured IKE authentication secrets, yet that applies to authenticate a third-party IPsec peer with a shared secret rather than the observed issue.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests