McAfee-Secured Website

Exam Code: 156-315.82

Exam Name: Check Point Certified Security Expert - R82 (CCSE)

Certification Provider: Checkpoint

Corresponding Certification: CCSE R82

Questions & Answers

100% Checkpoint 156-315.82 Guaranteed Success With Testking Training Materials

Get Real 156-315.82 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

Questions & Answers

100 Questions & Answers with Testing Engine

"Check Point Certified Security Expert - R82 (CCSE) Exam", also known as 156-315.82 exam, is a Checkpoint certification exam.

Pass your tests with the always up-to-date 156-315.82 Exam Engine. Your 156-315.82 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Checkpoint 156-315.82 Practice Test 33

Question 320

After its prerequisite check, security operations needs to upgrade multiple supported, managed R82 Security Gateways from SmartConsole. The management server meets the documented prerequisites and can reach the target devices. Which centralized capability should the team use?

  1. Select Gateway & Server objects under Central Deployment
  2. Use SmartConsole Central Deployment where supported
  3. Use Central Deployment Version Upgrade to Specific Major Version
  4. Use Concurrent Install Policy as the tool for installing Security Gateway operating-system upgrades

Explanation

Correct Answer

B:

Central Deployment is the documented gateway best practice. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The deployment selection identifies actual upgrade targets; this does not resolve the observed condition.

C:

Central Deployment offers target-version selection, but the current evidence calls for a different R82 operation.

D:

Use Concurrent Install Policy as the tool for installing Security Gateway operating-system upgrades. Policy installation is a separate operation; the task requires software-package Central Deployment, not firewall-policy installation.

Question 321

A network migration asks to preserve existing R82 management objects and policy data while retiring the old physical management server. The gateway Access Control policy is already installed and continues forwarding. A proposed change would be to connect with SmartConsole and inspect imported configuration, which addresses the different requirement to validate the database after migration completes. Which action instead addresses the observed incident?

  1. Invoke migrate_server export from the prescribed scripts directory
  2. Choose management database migration rather than gateway policy reinstall
  3. Back up the current management configuration first
  4. Connect with SmartConsole and inspect imported configuration

Explanation

Correct Answer

B:

Management migration moves objects, settings, and policy database. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The management migration tool serializes the management database, yet that applies to run management database export with the R82 migration tool rather than the observed issue.

C:

The R82 migration procedure begins with source backups; this does not resolve the observed condition.

D:

Post-import SmartConsole inspection confirms objects and policies, but the current evidence calls for a different R82 operation.

Question 322

A geographically separate second R82 ElasticXL Site has been planned for availability. The newly powered member appears under Pending Gateways and the existing first site must remain unchanged. The controls that address the separate requirement to verify the distribution architecture within one site are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Expect the SMO to accept and distribute traffic to members
  2. Remove it then add as a pending member to the target site
  3. Create a new Site while admitting the pending appliance
  4. Add the pending appliance to the existing Site

Explanation

Correct Answer

C:

A new site is used to establish High Availability sites. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The SMO handles distribution to other site members, but the current evidence calls for a different R82 operation.

B:

The documented workflow removes and re-adds a node to the chosen site; this does not resolve the observed condition.

D:

Adding to the existing site enables supported load sharing, yet that applies to increase capacity inside an existing ElasticXL Site rather than the observed issue.

Question 323

After a management-link outage, both R82 Management Servers show Active in the HA status pane. Each has accepted changes while isolated. The owner has chosen which database to retain and captured the other changes. The operator must distinguish this from a separate requirement to assign the default role to newly installed secondary management. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Leave the newly defined secondary Management Server in Standby
  2. Initiate changeover so a healthy standby becomes Active
  3. Use the Active Management Server for write operations
  4. Use Management HA actions to set one server to Standby

Explanation

Correct Answer

D:

One Active server is required for a consistent normal HA state. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Secondary management servers start in Standby by default, but the current evidence calls for a different R82 operation.

B:

A controlled management changeover restores an Active management server; this does not resolve the observed condition.

C:

Only the Active server accepts normal management changes, yet that applies to make configuration changes while the management pair remains healthy rather than the observed issue.

Question 324

A security gateway must translate internal clients only when they contact one specified partner server; the same clients must retain their original source for other destinations. Automatic Hide NAT is too broad. An alternate diagnosis concerns the requirement to handle an automatic source and destination NAT match, for which a colleague suggests account for separate matching automatic source and destination rules. Based on the recorded symptoms, which corrective step should have priority?

  1. Create a Manual NAT rule matching the specified address pair
  2. Create an appropriate one-direction Manual NAT policy rule
  3. Account for separate matching automatic source and destination rules
  4. Place the intended matching rule first in the NAT rule order

Explanation

Correct Answer

A:

Manual NAT can match both original source and destination. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Manual NAT supports direction-specific static translation; this does not resolve the observed condition.

C:

Automatic NAT can enforce matching source and destination rules, but the current evidence calls for a different R82 operation.

D:

Only the first matching Manual NAT rule is enforced, yet that applies to understand behavior when several Manual NAT rules could match rather than the observed issue.

Question 325

An R82 gateway maintains a permanent site-to-site tunnel to a third-party IPsec firewall. Traffic becomes idle and Check Point tunnel-test packets receive no useful response. The peer supports standards-based IKE keepalives. A preliminary suggestion is to apply the permanent-tunnel setting to the entire community. The incident evidence instead points to a different control within the same R82 subsystem. What is the most relevant action?

  1. Enable permanent-tunnel tracking or alert behavior
  2. Use periodic tunnel-test responses to determine up status
  3. Apply the permanent-tunnel setting to the entire community
  4. Use interoperable IKE Dead Peer Detection for supported permanent-tunnel monitoring

Explanation

Correct Answer

D:

R82 Dead Peer Detection supports third-party gateways, while proprietary tunnel-test packets require Check Point peers. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Permanent tunnel monitoring can issue logs and alerts on failure; this does not resolve the observed condition.

B:

Test packet responses are the basis for permanent tunnel status, yet that applies to verify a permanent VPN tunnel remains reachable rather than the observed issue.

C:

Community-level settings can mark all eligible tunnels permanent, but the current evidence calls for a different R82 operation.

Question 326

A security director needs a saved periodic incident-summary deliverable from R82 SmartView rather than live interactive dashboards. The relevant dataset can already be queried in Logs & Events. A proposed change would be to access SmartView on the appropriate server web endpoint, which addresses the different requirement to use a browser instead of installed SmartConsole for views. Which action instead addresses the observed incident?

  1. Generate a Compliance Blade report in the Reports view
  2. Open Logs & Events and select Reports
  3. Access SmartView on the appropriate server web endpoint
  4. Open Logs & Events and select Views

Explanation

Correct Answer

B:

Reports summarize monitored activity for presentation. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Compliance reporting supports a PDF output; this does not resolve the observed condition.

C:

SmartView exposes views and reports through its web application, but the current evidence calls for a different R82 operation.

D:

Views present monitored security information and visual queries, yet that applies to access a predefined analytical security view rather than the observed issue.

Question 327

A managed gateway still runs the old major Check Point release. The approved change is to upgrade that gateway to the documented compatible R82 major version, not apply a Jumbo Hotfix and not change policy. The controls that address the separate requirement to schedule centrally coordinated gateway software changes are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use the Install Hotfix/Jumbo deployment action
  2. Review the package installation and gateway version result
  3. Use the Version Upgrade action on the selected gateway
  4. Use the Gateway & Servers deployment actions in SmartConsole

Explanation

Correct Answer

C:

The Version Upgrade action deploys supported gateway software. This directly addresses the documented incident evidence.

Incorrect Answers

A:

Hotfix deployment targets fixes on the existing release; this does not resolve the observed condition.

B:

Actual installed version proves the deployment target state, yet that applies to validate installed hotfix levels after deployment rather than the observed issue.

D:

SmartConsole exposes centrally managed software deployment actions, but the current evidence calls for a different R82 operation.

Question 328

The source R82 Management Server has three SmartConsole sessions containing unpublished object edits. The migration export is scheduled to begin in ten minutes, and those edits must not silently disappear from the destination. The operator must distinguish this from a separate requirement to validate the database after migration completes. Which supported change follows from the actual evidence rather than that alternative hypothesis?

  1. Publish or discard sessions with unpublished changes
  2. Connect with SmartConsole and inspect imported configuration
  3. Invoke migrate_server export from the prescribed scripts directory
  4. Export on the source and import on the destination

Explanation

Correct Answer

A:

The migration prerequisite resolves uncommitted sessions. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Post-import SmartConsole inspection confirms objects and policies, but the current evidence calls for a different R82 operation.

C:

The management migration tool serializes the management database, yet that applies to run management database export with the R82 migration tool rather than the observed issue.

D:

Management migration preserves the database through export/import; this does not resolve the observed condition.

Question 329

A cloned R82 ElasticXL member finishes image transfer but repeatedly transitions from Down to Up during admission. The team needs the messages describing cluster state changes, not the file-copy log. An alternate diagnosis concerns the requirement to inspect discovery and provisioning state from CLI, for which a colleague suggests run show cluster info provision in Gaia gClish. Based on the recorded symptoms, which corrective step should have priority?

  1. Run show cluster info provision in Gaia gClish
  2. Inspect /var/log/lightshot.log on the relevant member
  3. Inspect the $FWDIR/log/blade_config state messages
  4. Review supported platform and cluster membership limits

Explanation

Correct Answer

C:

blade_config records important cluster up/down messages. This directly addresses the documented incident evidence.

Incorrect Answers

A:

The provision command displays detected members and states, but the current evidence calls for a different R82 operation.

B:

The lightshot log documents SMO snapshot and image cloning, yet that applies to investigate image-cloning progress problems rather than the observed issue.

D:

ElasticXL has documented platform and membership constraints; this does not resolve the observed condition.

Question 330

A change was made inside a SmartConsole session on the Active management member, but nobody published that session. The Standby does not reflect the proposed object, although peer synchronization is healthy. The controls that address the separate requirement to create mutually consistent backup material for a management HA pair are already working as designed, and the change ticket must not disturb them. Which R82 action addresses the remaining symptom?

  1. Use Management HA revision-based synchronization for published changes
  2. Confirm peer state and re-synchronize management databases
  3. Open the Management High Availability status in SmartConsole
  4. Back up or snapshot all HA servers at the same point in time

Explanation

Correct Answer

A:

Only published SmartConsole sessions synchronize, and revision-based replication avoids unnecessary full database transfers. This directly addresses the documented incident evidence.

Incorrect Answers

B:

Management synchronization restores the appropriate structured peer state; this does not resolve the observed condition.

C:

Management HA status reports peer role and synchronization health, yet that applies to review whether the management HA partner is synchronized rather than the observed issue.

D:

Coordinated backups retain a consistent state across HA peers, but the current evidence calls for a different R82 operation.

Check Point Certified Security Expert - R82 (CCSE) (156-315.82) Practice Tests